Control Valves Dealers in Pune

Our products are manufactured keeping in mind international quality standards. Thus, they are reliable and worth their price. Owing to immense experience in this domain, we became efficient in providing quality downstream pressure control valves.

Electropneumatics makes pneumatic valves suitable for compressed air, water, vacuum, gases and low pressure oil. They are available as solenoid-operated, pneumatically-operated and manually-operated. Solenoid coils are available for AC and DC voltages. The valve range consists of Directional control valves- 2, 3, 4-way, 2, 3-position, singledouble solenoid, directpilot pneumatically manually operated, Flow control, check and needle valves, Quick exhaust valves, Shuttle valves, Rotor seal couplings, Dual sensing valves, Rotary actuators, Stackable valves- 2, 3, 4-way, 2, 3-position, singledouble solenoid, Accessories like silencers, mufflers, air preparation units

A motorized proportional control ball valve supports various processes such as temprature control. ▪ Opening adjustment can be executed in propotion with input signal.

Because of the unique vortex flow characteristics inside the STVM valve, it is capable of mixing steam and water without the usual noise and vibration associated with other types of mixers. As a safety feature, the thermal actuator in the valve outlet is designed to turn off the steam flow into the valve if the cold water flow into the valve is interrupted. The entire internal operating mechanism (AKA cartridge) of the STVM valve can be quickly and easily removed as a single assembly by simply unscrewing the valve cap. This allows easy cleaning and service without removing the valve from the line. The unique flow characteristics of the vortices inside the valve create a scouring action that together with special coatings on the cartridge element minimize the effects of mineral deposits on valve operation, assuring increased service life even under adverse conditions.   Design Features * Automatic thermostatic bypass* Thermostatic flow control* Hydraulic bypass* Freeze protection* High or low temperature relief* Thermal relief valve for pumps* High temperature safety shutoff* Thermostatic drain valve* Thermostatic cooling water control* Thermostatic condensate drain

Rutcon series 1121 globe control valves are produced by combining technology engineering, modern manufacturing tech techniques & stringent quality control procedures. A wide variety of trim options, combined with design flexibility will satisfy majority of critical and non - critical applications found throughout the process, power and oil industries. sizes: ½” to 16” (15mm to 400mm) higher sizes available on request ratings: ansi b 16.5 150# to 2500# other standards available on request. application: to control large range of process parameters, specially for oil and gas production, power generation, chemical, petrochemical, fertilizer, pharmaceutical, processed food and other process industries design & performance feature:  high flow capacity and high flow gain.  streamlined flow passage and excellent flow control range ability.  high range ability using low flow trims  high powered actuator, field reversible on request.  streamlined flow passage and excellent flow control range ability.  tight shut off permissible  high range ability using low flow trims  large variety of trim design varying from contoured trims to single stage ported and multiple stage low noise anti cavitations trims  end connections to suit any pipe work configuration as per standards.  can be supplied with wide range of interchangeable trims sizes  leak proof packing are available on request  characteristics - equal percentage, linear and quick open.

We make available an exclusive range of 3 Way Temperature Control Valves with high functionality and flawless construction. The Temperature Control Valves are equipped with actuators which control the flow of different materials.

that can offer a comprehensive variety of valves for high pressure and high temperature applications for various sectors such as Power Plants, Oil and Gas, Chemicals, Petrochemicals, Paper, Sugar and Steel.

Combnine harvesters, compactors, concrete mixers, car carriers, dozers, dumper placers, forklifts, front end loaders, garbage compactors, utility vehicles, pavers, mechanical and hydrostic loasers, road sweeper, sky lifts, overhed platroms, truck cranes, tractor attachment-backhe, tilesnricks presses.

  The Axial Flow Control Valve is design for special applications requiring high flow capacity, the precise control from a linear motion closure member, and reduced turbulence and vibrational effects. An ideal application is centrifugal compressors, as commonly used in gas transmission compressor stations, petro-chemical installations, which display a potentially destructive phenomenon called ãsurgeà. Surge is a reversal of high velocity flow that can have catastrophic consequences to the compressor. To protect the compressor, the anti-surge valve control valve must open very fast and eject the surge. These valves have to be fast acting but also have high capacity and anti-noise designs Due to the high capacity of the axial flow valve, several stages can be used in order to reduce the noise level of these applications. The crank-lever system design of the Axial Flow Control Valve, transform a small torque into a big thrust, allowing the valve to require smaller actuator sized, which in consequence increases precision and speed of control. These control valves can be equipped with SAMSON GROUP actuators and valve accessories such as positioners, limit switches, and solenoid valves.   FEATURES & BENEFITS Smooth and precise control that is friction free, backlash free, and unaffected by dirt Environmentally safe with zero emissions due to rotating shaft Drive mechanismås multiplier effect gives maximum thrust when it is required SPECIFICATIONS Size:4" to 24" ANSI Class:150 to 900 Std. Materials:Carbon Steel, Stainless Steel Temperature Range: -58 to 482℉(-50 to 250℃) .  

We offer a vast range of exclusive quality 5/2 Way Pilot Operated Single Coil Solenoid Valve, which is made with high grade raw materials and modern technologies. We as a leading Manufacturer, Supplier and Exporter provide an outstanding performance in the form of this immaculate quality which is highly demanded and praised among the customers. We manufacture it in different specifications and can customize according to clients requirement. Get your hands on the impeccable quality for minimal rates. Additional Information: Type: 5/2 Way Pilot Operated Single Coil, Poppet type design Port Connection: 1/4" BSP Mounting: Suitable for sub base mounting Media: Air Operating Temperature: 80°C max Operating Pressure: 2-10 bar Orifice: 6 mm Flow Factor: 12 KV Coil: 230 VAC / Class 'F' Insulation / Size 1 / IP65 Protection Coil Power Consumption: Inrush VA-18 / Hold On VA-12 / Wattage - 6W Valve Body Material: Aluminium alloy hard anodized Manual Override: Knob type lockable arrangement Operating Pressure: Solenoid Valve for Double Acting Cylinder

Diaphragm Digital Control Valve is an electrically actuated, hydraulically operated multi-function control valve. It can be used for local as well as remote controlled batching operations with electronic batch controller. The valve also offers an in-built flow governing function   DESIGN FEATURES   Precision multi-stage opening and closing Fail-safe design Low pressure drop Bubble-tight seat design Flow rate control PRINCIPLE OF OPERATION   The Diaphragm Digital Control Valve basically consists of a diaphragm operated main valve and two solenoid valves. Normally open (NO) solenoid connects the valve cover chamber to the upstream pressure, whereas normally closed (NC) solenoid connects the valve cover chamber to the downstream pressure. When the Diaphragm Digital Control Valve is used with an electronic batch controller, it can be digitally controlled by operating the solenoid valves through any of these three stages : when NO and NC solenoids are energized, the valve opens gradually. when NC solenoid is de-energized (keeping NO solenoid energized), the valve locks at its current position. when NO and NC solenoids are de-energized, the valve closes gradually. The operation of the valve is simple and is explained below. The total batch quantity delivered and controlled through the valve is divided into 7 stages (Refer graph) for the purpose of convenience. Initially both NO and NC solenoid valves are in de-energized condition. The NO valve applies high upstream pressure on the diaphragm, whereas the NC valve prevents this pressure from getting drained to the downstream side. The valve remains close as a result of this. Stage 1Both NO and NC solenoids are energized. NO valve now restricts the high upstream pressure from entering into the cover chamber. NC valve permits the pressure above the diaphragm to vent to the low downstream pressure. This creates a differential pressure across the diaphragm, the high upstream pressure acting from below the diaphragm opens the main valve and allows the flow to start through the valve. Stage 2As the flow rate reaches predefined value (set in the batch controller as “Low Flow Start”) the NC valve is de-energized. This prevents further draining of the chamber and locks the valve at this flow rate. Initial delivery at slow speed avoids splashing of product and also avoids the generation of static charge. Stage 3When sufficient quantity is delivered at the slow speed, the NC valve is energized again. This allows further draining of the chamber and hence increases the flow. Stage 4When the flow reaches to the maximum level (set in the batch controller), the NC solenoid is de-energized. This maintains the constant high flow rate for the remaining batch. During this stage, the flow rate control is done by the batch controller. When a number of flow meters are connected to the same pump, stopping (or starting) one or more meters increases (or decreases) the flow rate at the remaining meters. When the flow rate increases, the NO solenoid is energized momentarily. This injects some high pressure in the cover chamber and makes the valve to throttle in order to maintain the set flow rate. If the flow rate decreases, the NC solenoid is energized momentarily. This allows slight draining of the chamber and allows the valve to open further in order to maintain the set flow rate. Stage 5At the end of the batch, the NO solenoid is de-energized. This injects high upstream pressure into the cover chamber and throttles the valve. Stage 6When the valve throttles sufficiently to achieve the predefined slow closing flow rate (set in the batch controller), the NO solenoid is energized. This maintains the uniform flow rate. Stage 7When the batch quantity is delivered, the NO solenoid is de-energized. (NC solenoid is already de-energized.) This applies high upstream pressure into the cover chamber, which makes the main valve to close completely to achieve bubble-tight shut-off. Note: The number of stages during opening and closing are programmed in the batch controller and can be as many as desired. One stage during opening and two during closing are recommended. Caution: Sufficient pumping flow rate should be available to achieve the flow parameters set in the electronic batch controller. In the absence of this, there are chances of delayed response in closure, resulting in valve over-run.

Hygienic design according to EHEDG. Gasket with specific profile guarantees reliability under adverse working conditions. Hygienic design of the gasket ensures optimal cleaning. Single-acting pneumatic actuator. Normally closed valve (NC).

even for applications with numerous actuators, Three directional control valves in a common housing form the base of the manifold valve plate in monoblock design. This results in the most compact package.basic block: three directional control valves of identical nominal size in one cast housing, designed for the Linde Synchron Control (LSC)-Load Sensing System.

2 stage digital control valve for precise delivery of set quantity. These valves are used for batching applications. A wide range of material of construction is available as per customers applications demand.