Recommended For :
Hydraulic jack applications. Meets Material Handling Institute specification IJ 100 for hydraulic hose and assemblies used with jacking systems.
Recommended For :
Hydraulic jack applications. Meets Material Handling Institute specification IJ 100 for hydraulic hose and assemblies used with jacking systems.
Recommended For :
High-pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type Sand performance requirements of EN 853 2SN.
Recommended For :
High-pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type Sand performance requirements of EN 853 2SN.
Handles and handlevers :-
The need for more comfortable and always more complete controls led Walvoil to develop a wide range of knob and handlevers suitable for our directional control valves.
Sensors :-
The sensor range allows the accurate check of the cursor position in the control valves.
Handles and handlevers :-
The need for more comfortable and always more complete controls led Walvoil to develop a wide range of knob and handlevers suitable for our directional control valves.
Sensors :-
The sensor range allows the accurate check of the cursor position in the control valves.
These products are complementary to the directional control valves when a sequence of operations, safety operations and / or an actuator selection are needed.
These products are complementary to the directional control valves when a sequence of operations, safety operations and / or an actuator selection are needed.
Cartridge design with integral hydraulic balancing, high performance, low noise level, high versatility and long service life.Displacement upto 150 cm³ /rev, pressure upto 210 and 300 bar.
Cartridge design with integral hydraulic balancing, high performance, low noise level, high versatility and long service life.Displacement upto 150 cm³ /rev, pressure upto 210 and 300 bar.
Application :
Recommended for heavy-duty industrial uses including heat control, melting of substances such as wax and glue, thawing, cleaning and steam transfer applications. It will handle all type of steam-saturated and superheated - up to 185 psi and +232°C.Note : Do not alternate change between Steam and Water
Application :
Recommended for heavy-duty industrial uses including heat control, melting of substances such as wax and glue, thawing, cleaning and steam transfer applications. It will handle all type of steam-saturated and superheated - up to 185 psi and +232°C.Note : Do not alternate change between Steam and Water
Application :
Recommended for with excellent steam handling the hose features a specially compounded, perforated synthetic rubber cover intended for use where the hose is exposed to all types of steam - saturated and superheated upto 150 psi and 195°C.Note : Do not alternate change between Steam and Water
Application :
Recommended for with excellent steam handling the hose features a specially compounded, perforated synthetic rubber cover intended for use where the hose is exposed to all types of steam - saturated and superheated upto 150 psi and 195°C.Note : Do not alternate change between Steam and Water
Recommended For :
Extremely high-pressure, high-impulse applications,. Most flexible EN 856 4SH hose in industry. Compatible with biodegradable hydraulic fluids like synthetic ester, polyglycol and vegetable oil as wel as standard petroleum-based fluids. Superior impulse performance : tested to 1,000,000 impulse cycles.
Recommended For :
Extremely high-pressure, high-impulse applications,. Most flexible EN 856 4SH hose in industry. Compatible with biodegradable hydraulic fluids like synthetic ester, polyglycol and vegetable oil as wel as standard petroleum-based fluids. Superior impulse performance : tested to 1,000,000 impulse cycles.
4-port, spool type, solenoid operated, directional control valves with wet armature AC or DC coils, and wide variety of spool configuration with spring centered and spring-offset arrangements.
4-port, spool type, solenoid operated, directional control valves with wet armature AC or DC coils, and wide variety of spool configuration with spring centered and spring-offset arrangements.
Sections modularity; parallel, series and tandem circuit possibility; port service valve prearrangement; adjustable regulating flow and pressure intermediate sections; these features let Walvoil sectional valves offer the right flexibility in a high technology system.
Sections modularity; parallel, series and tandem circuit possibility; port service valve prearrangement; adjustable regulating flow and pressure intermediate sections; these features let Walvoil sectional valves offer the right flexibility in a high technology system.
Application :
Recommended for Sand, Shot Blasting application and where abrasive material are carried at high velocity. Electrical conductivity : having two numbers braided copper flex wires laid spirally in opposite direction for electrical conductivity
Application :
Recommended for Sand, Shot Blasting application and where abrasive material are carried at high velocity. Electrical conductivity : having two numbers braided copper flex wires laid spirally in opposite direction for electrical conductivity
Application :
Recommended for heavy duty, high pressure use on Industrial, Construction & Pneumatic Mining applications, requiring heavy duty hose with an oil resistant tube and abrasion resistant cover.
Application :
Recommended for heavy duty, high pressure use on Industrial, Construction & Pneumatic Mining applications, requiring heavy duty hose with an oil resistant tube and abrasion resistant cover.
Return filters are used as process and safety filters to protect pumps and hydraulic circuits from contamination as per ISO 4406. They are available in 4 styles :
SMP semi-immersed filters for mounting to the oil tank with external / internal filter element
MPT semi-immersed filters for mounting to the oil tank with external / internal filter element
MHP / MPI semi-immersed filters for mounting to the oil tank with external / internal filter element
FRI semi-immersed filters for mounting to the oil tank or in-line, available in the single or duplex versions, with external / internal filter element
The FRI version can also be used as an in-line filter for forced lubrication or off-line systems.
Return filters are used as process and safety filters to protect pumps and hydraulic circuits from contamination as per ISO 4406. They are available in 4 styles :
SMP semi-immersed filters for mounting to the oil tank with external / internal filter element
MPT semi-immersed filters for mounting to the oil tank with external / internal filter element
MHP / MPI semi-immersed filters for mounting to the oil tank with external / internal filter element
FRI semi-immersed filters for mounting to the oil tank or in-line, available in the single or duplex versions, with external / internal filter element
The FRI version can also be used as an in-line filter for forced lubrication or off-line systems.
• Fixed displacement, Bi-Directional Pump• With 3, 5 or 7 Pumping elements• Options: Open and Close execution type• With or without Extension shaft• Qmax:: Upto 13.6 lpm @1440 rpm• Pmax:: Upto 550bar
• Fixed displacement, Bi-Directional Pump• With 3, 5 or 7 Pumping elements• Options: Open and Close execution type• With or without Extension shaft• Qmax:: Upto 13.6 lpm @1440 rpm• Pmax:: Upto 550bar
Atos a leader in proportional electrohydraulics, offers one of the most complete lines of proportional controls to achieve the fast, smooth & accurate movement required by today's modern machines.
Atos a leader in proportional electrohydraulics, offers one of the most complete lines of proportional controls to achieve the fast, smooth & accurate movement required by today's modern machines.
• Direct acting with guided cushioned poppet• Cartridge, Threaded and Subplate types• Sizes: NG 06, NG 10, NG 20• Qmax:: Upto 160lpm @1440 rpm• Pmax Set: Upto 700bar
• Direct acting with guided cushioned poppet• Cartridge, Threaded and Subplate types• Sizes: NG 06, NG 10, NG 20• Qmax:: Upto 160lpm @1440 rpm• Pmax Set: Upto 700bar
• Two stage spool type relief / reducing valve cartridges• Low pressure override• 4 pressure range setting available• Available with option of Set Screw and Hand Knob
• Two stage spool type relief / reducing valve cartridges• Low pressure override• 4 pressure range setting available• Available with option of Set Screw and Hand Knob
Secondary Business TypeManufacturer / Exporters / Wholesale Suppliers
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
With over 10 years experiences in VNM Hydrotek crews have created hydraulic power units as customers' applications and stabilized them in markets. We also have supported our customers' needs with prompt actions, so that they can have good reputations from end users or have great brand powers. With well skilled workers, VNM delivers the orders as quickly as what customers want and tries to keep good quality & stable quality whatever order quantities are. With well facilities our power units and components are delivered to customer after 100 % testing. With well-educated salesmen, VNM customers always are satisfied with full & quick supports for their inquires and customizing. We are working with best engineers in Hydraulic system, technicians and designers to keep up Hydraulic market trend and modify our systems. VNM always searches good educated and mind people to make real "World best hydraulic products"
Reviews & Ratings
Write a Review
Post Free Ad