Waterproofing Membranes Dealers in Mumbai

Cleaning surface then applying primer and then applying hot bitumin then fixing sheet,.

  cyntax pmb 500 : polymer modified bitumen waterproofing membrane   ●   —cyntax pmb 500 is a single component, liquid applied, polymer modified bitumen emulsion. It is coal tar free, moisture cured elastomeric waterproofing membrane. It is full flexible, very high water beading (water repellency) effect, can be applied on dry as well as wet/damp/moist surfaces.   —   —usage : it is high performance waterproofing membrane basically used for under laying protection to basement and roof top.  

• Application: Construction Use
• Feature: Long Life
• Chemical Name: ZC- ELASTOFALT
• Quality: Superior
• Storage: Cool & Dry Place

Uses For waterproofing of: New roofs. Balconies, terraces, parking garages, asbestos and concrete roofs. Industrial washrooms & shower Water reservoirs and swimming pools. Foundations, cellar walls, retaining walls, bridges abutments. Refurbishing of old waterproofing system including torch-on membrane. Facade damp proofing. Water proofing/Curing membrane and protective coating for sub structure.   Features Single component and cold applied. ZC- ELASTOFALT has excellent UV resistance and long term ageing stability. Cured membranes from ZC- ELASTOFALT remain highly flexible even at extremes of temperatures (-25°C to 120°C). Excellent vapour barrier. Easy to use. Non-flammable and Non-toxic Environment friendly. Resistant to chlorides and sulphates commonly present in the soil. Compatible with cementatious tiling adhesive.   Surface Preparation All surfaces should be sound, clean and free of contaminants. Absorbent surfaces e.g. concrete should preferably be dampened with water. In kitchens, toilets and other wet areas all the openings should be properly sealed. On all weak points such as cracks or around the pipes use a woven fibre glass mesh as reinforcement between the two coats of ZC- ELASTOFALT   Application ZC- ELASTOFALT can be applied by brush, roller or squeegee. Hot, dry or very porous substrate should be dampened with clean water prior to application of ZC- ELASTOFALT. When two or more coats are required, ensure that the preceding coat is fully dry before applying the successive coat, which should b e applied at right angle to proceeding coat. ZC- ELASTOFALT also acts as a non-degradable curing membrane; hence it may be applied immediately after the removal of mould, to the concrete structure, which has no aesthetic value such as the sub structure of the building.

Rubber membrane is manufactured from synthetic EPDM rubber. The EPDM rubber membranes is a single-ply membrane that can be used for various applications such as waterproofing of basements, roofs/terraces, expansion joints, wet areas (toilet blocks), facades, etc. It is a single product that can be used for waterproofing most parts of a building. The EPDM rubber waterproofing membranes are techno-commercially much better than substitutes such as bitumen membranes, crystalline products, admixtures, various coatings, etc. The use of these products may be avoided in projects where EPDM rubber membranes are used. TheEPDM waterproofing membranes are an excellent substitute to the torch-on membranes.The EPDM rubber roofing membranes are manufactured in widths upto 6 meters (20 feet), thereby reducing the number of site joints. The thicknesses offered are from 0.8 mm (30 mil) to 6.0 mm (235 mil). All the EPDM rubber membranes manufacture by Polygomma are single-ply. This ensures uniform performance across the full thickness of the EPDM sheet, and also the chances of inter-ply blisters and delamination are zero. Inter-ply blisters and de-lamination are quite common in the conventional waterproofing product such as bitumen and torch-on membranes. Unlike the torch-on membrane the EPDM rubber membranes do not required to be applied with flames, torches and gases. Rather the EPDM rubber membranes are applied with a bonding adhesive, making the installation very easy and safe. The large sizes of our rubber membrane make it easy for use in waterproofing of foundations, and large roofs. These rubber membranes can also be used in lining of various artificial water bodies such as canals, reservoirs, artificial lakes, fish hatcheries, industrial ponds, waste containment pits, etc. Basically these EPDM rubber membrane sheets can be used for waterproofing of almost all areas of a building from basement to roofs, and also can be used for lining of artificial water bodies and waste containment pits. Resistant to UV, Ozone, and air pollutants. Wide range of temperature resistance form -40°C to +160°C. Nearly millions of square meters of EPDM membrane have been installed on rooftops globally and they are known to have a service life of beyond 30 years. No torches or gas required during installation. Flame free and heat free installations. It is an environmentally and recyclable system. Lightweight: around 1.25Kgs/SQM. Single product for various areas such as basements, roofs, podiums/landscape areas, expansion joints, etc. Acts as an anti-root barrier. So they are idea for green roofs and landscape projects.

• Type: Polymeric Membrane
• Color: White
• Thickness: 400 micron to 800 micron
• Country of Origin: Made in India
• Width: Upto 1000mm
• Features: High Tear Resistance, Ozone Resistance, Resistant to Root Penetration, hence perfect for roof plantations, Temperature Resistant (-70o C to 70o C).
• Brand: SWARAIN
• Usage/Application: Waterproofing for Basement, Terrace and Wall Construction
• Packaging Size: 100 m
• Physical State: Solid
• Place Of Origin: India

Modern is among the leading exporters of APP Waterproofing Membranes to India. Product range being promoted here is manufactured to suit the Indian conditions. This needs expertise gained over multiple years viewing the complexity involved in manufacturing APP & SBS membranes. We have streamlined our processes and products to suit diverse environmental conditions in over past few decades.

Terroseal is an elastomeric, flexible single pack waterproofing membrane made out of 100% pure acrylic polymers. Hair line cracks on walls and terrace can easily be filled by Terroseal. It’s smooth and sheen finish adds to the aesthetic look unlike other waterproofing products.     Easy to apply ( Apply by brush or spray) Easy to maintain Resistant to salty water, humidity and atmospheric changes Economical Finest waterproofing properties Excellent elastomeric properties Provides strength Strong barrier for water and moisture

• Type: Waterproof Membrane
• Brand Name: ASMACO
• Model Number: ASMACOAT WP 900
• Place of Origin: United Arab Emirates
• Usage: Waterproof Projects

We are offering unprotected and Protected polymeric bitumen membranes, polymeric self-adhesive membranes and oxidated bitumen membranes for roofs and walls waterproofing.

APP Waterproofing Membrane, Bitumen Road Emulsion

Waterproofing Membranes, Waterproofing Services, Waterproofing Material

APP Waterproofing Membrane, Plumber Services, Carpenter Services

Waterproof Modular Tensile Membrane, Tensile Structures, PVC Cloth

EPDM Waterproofing Membrane, EPDM Roofing, Flat Roof Rubber Membrane

Waterproofing Membranes, anti-corrosion pipeline coatings, Bitumen Tapes

Self Adhesive Waterproof Membrane, Fiberglass Net, Stone Sealer

Waterproofing Membranes, Sunanda Polyalk Wp Waterproofing Chemicals

KCT Self Adhesive Waterproofing Membrane