Pressure Controllers Dealers

The product can substitute the parts in automatic water pump with complex structure controlled by traditional machinery switch (Such as pressure gauge, pressure switch, T - valve, check valve and pressure tank). It is featured with steady performance, low maintenance cost, long service life and convenient installation. When the green “Power on” power supply indicator light flashes, it means the power supply is connected. When the yellow “Pump on” light flashes, it means the water pump has been started. When the water pump continuously runs, the pressure in pipeline system will rise and when the required pressure of the equipment is reached for several seconds, the water pump stops working. In case this process can not make the pressure in pipeline reach the required pressure of the equipment, the red light “Failure” will flash. Under this situation, press “Restart” button and keep it, and wait for the pressure in pipeline reaching the required pressure of the equipment, then the red light will be off. Release the button and close the water tap. The product stays in normal standby state and keeps the pipeline system in water supply state with a constant pressure.

The Electronic Pressure Controllers, which we deliver, have maximum working presure of 10Bar. Owing to our speedy distribution network, we are capable to render quickly and hassle free deliveries. For ensuring safety of the products during handling, warehousing and transportation, we make use of quality packing material. Moreover, the task of packaging is undertaken by the experts.

For requesting literature or any other information about Digital Temperature, Pressure Indicators / Controllers, please use our Enquiry Form. We will send the necessary information in a very short time.

he ATEX approved Series AT2DH3 Digihelic® Differential Pressure Controller is a 3 in 1 instrument possessing a digital display gage, control relay switches, and a transmitter with current output. Combining these three features allows the reduction of several instruments with one product, saving inventory, installation time and money. The ATEX approved Digihelic® controller is the ideal instrument for hazardous area pressure, velocity and flow applications by allowing for the selection of pressure, velocity or volumetric flow operation in several commonly used engineering units. Two SPDT control relays with adjustable dead bands are provided along with a scalable 4 to 20 mA process output. In velocity or flow modes, a square root output is provided on the 4 to 20 mA signal to coincide with the actual flow curve. Flame-proof ATEX enclosures are available in aluminum and can include a glass window for viewing process information and set point status on digital display. Important notes for installation : Cables must be fitted through 12" NPT cable gland or ATEX conduit (not supplied with instrument),Open cover only after de-energizing instrument Etc.

Product Details: Valve mounted, Compact and simple pressure control system Output air pressure upto 3 Kg/Cm2 hence valve positioner not required Can be used directly for pressure reduction or as overflow system. No additional instruments required Totally mechanical, very easy to maintain in-house No electronics, hence not affected by ambient temperature All materials includes sensing bellow are cast AL and SS hence corrosion resistant Can be used with any control valves with any Pneumatic Actuator Very little air consumption

GDS Instruments Pressure Volume Controllers are general-purpose water pressure source and volume change gauges for the precise regulation and measurement of fluid pressure and volume change. Pressure applications from 0 up to 100MPa of wateroilair, with accurate measurement of volume change, all of which are capable of being logged and controlled by PC. The Enterprise Level PressureVolume Controller (ELDPC) is aimed at commercial testing (max 1MPa). The Standard PressureVolume Controller (STDDPC) is aimed at medium pressure commercial testing (

Features Part of Beamex Integrated Calibration Solution or a stand-alone pressure controller Automatic pressure calibrations Portable or bench mounted Output range: from vacuum to 70 bar (1015 psi) Precision: < 0.015 % FS 1 year uncertainty: < 0.025 % FS Supported user interface languages: English, German, French, Spanish, Italian, Chinese, Russian, Japanese, Polish, Portugese, Korean

The Series A4 digital differential pressure controller is a patent pending microprocessor based pressure controller for positive, negative, and differential pressure as well as velocity and flow. The Series A4 differential pressure controller includes (2) 8A SPDT relays, and an optional digitally scalable 4-20 mA output. The programmable control allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user-friendly menu on the OLED display or with an Opti Link™ programming key. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate user preferences. Compared to other mechanical products, the Series A4 digital differential pressure controller has a significantly reduced depth, an improved look, and better performance. Techinical Specification Maximum Pressure: Ranges -00 to -05 = 2 PSI (13.8 kPa) Ranges -06 to -14 = 10 PSI (68.9 kPa)Media Compatibility: Air and compatible non-combustible, non-corrosive gassesAccuracy: 1.0%, 0.5% or 0.25%Temperature Ranges: Compensated and Operating: -10° to 140°F (-23° to 60°C)Thermal Effect: +/- 0.02% FS/°FOutput Signal: 4-20 mA (option)Loop Resistance: 750 Ω Max (for internally sourced power); 1800 Ω Max (for externally sourced power of 36 VDCPower Supply: Universal 24-240 VAC or VDCHousing Material: Glass Filled NylonEnclosure Rating: Designed to meet NEMA 4X (IP 65) face; with optional cover the entire product is weatherproofRelays:  (2) SPDT 8 Amps @ 250 VAC, 5A @30 VDCElectrical Connections: screw terminalsResponse Time: Display: 4 Digit, red LED, ½” (12.7 mm) digits; OLED programming displayProcess Connections: Push on connection for 3/16” (5 mm) tubingAgency Approvals: ETL, CE

  PRC has designed & developed a complete solution for heavy presses (Pneumatic) manufacturers & users for their pressure controlling problems. It is very challenging to maintain predetermined pressure in the presses to produce a good quality product. Many times product is rejected due to increase or decrease in pressure which costs to manufacturer very high.   Independent electronic module for die cushion & counter balance Due to manually controlled pressure by regulator of cushion & counter balance the following drawbacks has removed by using above automatic pressure controlling system. Cushion Production Was Less (Due To High Pressure Setting Time) Production Rejection Was High (Due To Not Exact Setting Of Pressure As Components Were Required. Hard In Machining. (High Cushion Impact On Slide, Due To High Cushion Pressure) Not Proper Shape Of Component. (Due To Less Cushion Pressure) Counter balance Motor Taking High Current When Balance Pressure of Counter Is High. Motor Taking High Current When Balance Pressure of Counter Is Low. Slide Coming Down May Cause Of Accident, Due To Not Proper Counter Balance Pressure As Per Slide And Die Weight. Automatic pressure controller Easy To Set Pressure for both Cushion And Counter Balance. Set Both Pressure as Per Component’s Requirement Once And Forget It. High Production and No Rejection. Less Power Consumption. Improve Product Quality And Do Safe Production. Features: Designed to suit the Indian environmental conditions Inexpensive in comparison to other solutions Precision & accurate pressure setting Wide application range Reliable & dependable User friendly with standard warranty Customized solutions available Standard Specifications:   Application- Suitable for presses (Die Cushion & Counter Balance) Display- Two 20 x 4 lines LCD with back light. Analog Input- Two Analog inputs for Strain Gauge type Pressure Transducer. Digital Inputs- 8 Digital Inputs. Outputs- 8 Relay outputs for Machine operation. Function mode- Auto & Manual. Calibration- Simple calibration procedure for Pressure Transducer. Keypad- 4 keys to enter parameters & operation control. Indication- LED For (Pressure – Fill, Pressure – Ok & Pressure – Exit). Buzzer- For low & High Pressure status. Settable parameters- Air low & High Limits. Controller- Two independent controllers for Cushion & Counter Balance.

We are offering electronic pressure controller. * netel gas chromatograph model chrom lite gc-3000a with single flame lonization detector, with one packed or one splitsplit-less injection port. * electronic pressure controller (epc) provides excellent performance with capillary columns. *3 independent heated zones up to 400 c for individual control of injector, detector and oven. *higher sensitivity flame ionization detector requires no make up gas due to unique zero dead volume design. *32 keys for setting of the parameters & eight status l.e.d. Indications including oven ramp status. * pc control communication with rs. 232.

4 Digit 7 Segment LED -1 to 1000 Bar in different ranges ±0.25% of FS Accuracy Selectable any two scales (Bar, Psi, Kgcm2 etc.) 14" NTP male for pressure connection 230V AC 50Hz Supply One set point with relay output Zero adjustment provided Size: 96x96x110 mm

We have available following Ships spareparts for Sale: Product-Pressure Controller Product-Nakakita Seisakusho Type-NS-PS-732 Sr no-32K410 Date-23-3-82 If any requirement then please contact us on +91 97279 70078.