Industrial Explosives Pvt. Ltd. Gandhibagh, Nagpur, Maharashtra

Characteristics & application :-super mec is suitable for shovel as well as dragline benches. By varying the percentage of prilled an dope, the product can be made to suit different strata conditions for shovel as well as dragline benchesbulk emulsion explosives characteristics & application :- super mec is suitable for shovel as well as dragline benches. By varying the percentage of prilled an dope, the product can be made to suit different strata conditions for shovel as well as dragline benches. technical data:-type : doped emulsion classification : class ii explosives v.o.d. : 4200 +/- 300 m/sec . Sensitivity : sensitive to 0.2% cast booster. Viscosity : more than 50,000 cps (brookfield). Energy : 800 k cal/kg. Cup density : 1.05 to 1.20 grms/cc. Sleeping time : more than 20 days. Relative bulk strength : 1.3 (compared to anfo)

Amastem®(cmri tested- stemming plugs)introducing revolutionary amastem (stemming plugs) for first time in the country for unmatched blast performance & fragmentation, specially designed for use in 32 to 45mm drill holes for underground mining and tunnelling.how to use? insert the amastem in the blast hole by pushing it gently to the desired depth with the help of a non ferrous push rod so that the stemming plug almost touches the explosive column. If desired an air gap between the explosive column and the stemming plug may be provided. Hold the detonator lead wire with other hand. The lead wire will simply slip in to one of the grooves preventing the lead wire from crushing. Advantages:more convenient than conventional mud cartridgeseasy to handle & transportcost effectiveenvironmentally friendlywater prooftime saving for stemmingimproved blasting efficiency through air deckingdirects maximum blast energy into the rock through slowing down the stemming movementenhanced rock fragmentation resulting in more steam coal10-20% more blasted rock/ coalmore pull & less socketsreduced vibration & damage to roof & sides.

We are providing Siren at the affordable prices.

For optimum / better care of lead lines (shot firing cable), and to avoid misfires they should be rolled up every time after use. Cable drums are ideal for this as they save time and prevent entangling of badly coiled lines. Shot firing cable is often subjected to wear and tear due to lack of proper attention because it usually remains use for a long time and if faulty cause trouble in whole succession of blasts.to protect the shot firing cable from being twisted and damaged during storage, we have observed that the life can be increased if it is reeled up each time after use. This saves much time that is wasted on disentangling badly coiled cables. These cable drums are robust and specially made to suit the mining industry. specifications:- drum capacity : 200 / 300 mtrs.dimensions : length 12 " width : 10 " height : 18.5 "weight : 4.6 kg.

We are providing pricker at the affordable prices.

In a conventional system of initiating the column charge by df, a small amout of explosive around the df is desensitised due to viloent detonation of df as it contains very high explosive charge (generally 10 grm/m ) & does not give bottom initiation to the column charge. To overcome this drawback, ama industries pvt. Ltd. Proudly introduces mecdet- a non electric initiating system.a variety of tube length & delay timing to suit particular requirment are offered by us.due to its non-disruptive tube it completely elimintes the desensitisation of explosive, avoids stemming ejection of charge, gives true bottom initiation & proves economical over the conventional system.characteristics :mecdet consists of a shock tube with delay detonator. Shock tube is a plastic tube 3.0 mm outer diameter and 1.2-1.4 mm inner diameter, specially developed for the purpose to withstand 20kg load without breakage and has very high abrasion resistance.end of the tube is hot sealed to ensure water profness and the other end is crimped to the detonator.the velocity of detonation of tube is 2000 +/- 200 m/sec.delay timing of the assembly is precisely controlled and tested in house.mecdet is tested for various performance & saftey tests. (for more details, please consult us)advantages : * user friendly:-it is provided with suitable connectors to facilitate easy & quick connection.* safety in handling:- being a non electric system, it is immune to stray current & high radio frequencies thus improved safety.* economytrue bottom initiation of column charge. Due to non disruptive tube, desensitisation of explosives does not take place.flexiblity in delay interval & virtually any number of holes can be connected & blasted in a single shot.effective ''in hole '' delay system can be provided if required.all these factors add to the economy of blasting & increased output per charge of explosives.*environment:-due to very low explosive charge in the shock tube it reduces noise and groud vibration. Mecdets come with a range of delay timing & shock tube length to suit the specific customer requirement. Mecdets are available in surface & hole delays.mecdet surface : 17 ms, 25 ms, 42 ms, 67 ms.mecdet hole: 200 ms, 250 ms, 300 ms, 350 ms, 400 ms, 450 ms, 500 ms.shock tube length vary from 3 mtr to 24 mtr.mecdets are properly identified by putting delay time & length tags on the coil.packaging : 5 to 10 coils of mecdet are packed in one paper envelop. It is properly marked with delay time, tube length. These envelopes in turn are packed in cardboard boxes marking the delay time & tube length.storage : this product must be stored in licensed detonator magazine following all statutory & regulatory norms & taking due saftey precaution.handling : this product must be handled by qualified, authorised persons only. Lack or insufficient knowledge may lead to misfire of product, can cause fatal injury to the person handling it. For any clarification, information or assistance please contact our technical service representative, sales and technical manager.

Characteristics :-mecpower-iv is non cap sensitive slurry explosive. Because of its gelled consistency mecpower iv provides maximum bore hale coupling and achieves high bore hole density resulting in maximum energy transfer to surrounding strata. It provides high degree of safety from impact and friction. Produces minimum noxious fumes on blasting. Mecpower-iv could be initiated by mecforce, mecforce(h), mecforce(m) and mecforce(c) of similar diameter. Gel is rigid well cross linked and resistant to water.application :- a low energy column charge. When primed by mecforce, mecforce(h), mecforce(c) or mecforce(m), it gives best result as column charge. Due to low density, mecpower-iv distributes the explosive column very well along the bore hole.technical data:-density : 1.1 to 1.2 g/cc v.o.d. : 3000 to 4000 m/sec. Sensitivity : sensitive to mecforce, mecforce (h), mecforce(c), or mecforce(m). Classification : class ii explosives suggestion : under extreme temperature conditions. Mecpower - iii like all other slurry explosive should be kept in its protective packing box until actual use. Packaging : supplied in different sizes of strong polyethylene cartridges to meet varying loading conditions.

Characteristics :- mecpower-iii is a non-cap sensitive slurry explosive. Like other slurry products mecpower-iii also gives maximum bore hole coupling and achieves high bore hole density resulting in maximum energy transfer to surrounding starts. Mecpower iii is safe from any danger due to impact and friction. It could be initiated by mecforce(m) of similar diameter. It produces minimum noxious fumes. Gel is well cross linked and resistant to water. Application :- it is booster sensitive column charge, when primed by mecforce, mecforce(h), mecforce(c) or mecforce(m) gives a long column of explosive inside the bore hole. Mecpower iii most suitable for breaking medium hard to hard rock.technical data:-density : 1.1 to 1.2 g/cc v.o.d. : 3200 to 4400 m/sec. Sensitivity : sensitive to mecforce, mecforce (h), mecforce(c), or mecforce(m). Classification : class ii explosives suggestion : under extreme temperature conditions, mecpower - iii like all other slurry explosive should be kept in its protective packing box until actual use. Packaging : supplied in different sizes of strong polyethylene cartridges to meet varying loading conditions.

Characteristics :-mecpower-ii is an aluminized gelled slurry explosives and like our other slurry products, mecpower-ii exhibits all characteristics like high bore hole coupling achieving maximum bore hole density and gives maximum energy transfer to the rock. Gel is rigid, well cross linked and resistant to water.application :- because of its high v.o.d. Mecpower-ii acts as an excellent base/column charge when initiated by mecforce or mecforce (h) of similar diameter. A combination with mecforce or mecforce (h), mecpower - ii could be used for removing toe and to break very hard rock. A combination of mecpower - ii with mecpower - I boostered by mecforce or mecforce (h) could offer an economic blasting for hard to very hard rock or ore.technical data:- density : 1.15 to 1.25 g/cc v.o.d. : 4000 to 4500 m/sec. Sensitivity : sensitive to mecforce or mecforce (h) of similar diameter. Classification : class ii explosive suggestion : under extreme temperature condition mecpower - ii. Should be kept in its protective packing box until actual use. Packaging : supplied in different sizes of strong polyethylene cartridges to meet different loading conditions.

Characteristics :-mecpower-i is a booster sensitive aluminized slurry explosive. Because of its gelled consistency, mecpower - I provides maximum bore hole coupling and achieves high bore hole density resulting in maximum energy transfer to surrounding strata. Mecpower-i provides high degree of safety from impact and friction. Produces minimum noxious fumes on blasting. Could be initiated by mecforce or mecforce (h) of similar diameter. Gel is rigid, well cross linked and resistant to water.application :- it is an excellent column charge when primed by mecforce or mecforce (h). Because of its low density, mecpower-i helps to build up column inside the bore hole. On suitable combination with mecforce, it imparts heaving effect to the rock suitable for breaking medium hard to hard rock when boostered with mecforce or mecforce (h).technical data:-density : 1.05 to 1.25 g/cc v.o.d. : 3300 to 4300 m/sec. Sensitivity : sensitive to mecforce or mecforce (h) of similar diameter. Classification : class ii explosives suggestion : under extreme temperature conditions, mecpower - I like all other slurry explosive should be kept in its protective packing box until actual use. Packaging : supplied in different sizes of strong polyethylene cartridges to meet varying loading conditions.

Characteristics :-mecforce(m) is an aluminised cap sensitive primer. Its well gel consistency gives excellent base hole coupling.it is high water resistant explosive. It provides high degree of safety from impact and friction. It produces minimum noxious fumes or blasting. application :- mecforce(m) is large diameter primer for open cast mines. Its combination with mecpower-i, mecpower-ii, mecpower-iii & mecpower-iv gives best results in blasting. It is suitable to break medium hard to hard rock & coal.technical data:-density : 1.1 to 1.2 g/cc v.o.d. : 3600 to 4800 m/sec. Sensitivity : class ii explosive. Suggestion : under extreme temperature conditions, mecpower (m) like all other slurry explosive should be kept in its protective packing box until actual use. Packaging : supplied in different sizes of strong polyethylene cartridges to meet varying loading conditions.

Characteristics :-mecpower (h) is a highly aluminized cap sensitive primer. It can boost any non cap sensitive relatively weak - column charge used for blasting in open pit mining. Its high v.o.d. Helps to reduce booster column ratio resulting in economy in blasting operation. Its high density increases its sinking ability in slushy bore holes. It provides a high degree of safety from impact and friction. It produces minimum noxious fumes on blasting. Gel is rigid, well cross linked and resistant to water.application :- mecforce (h) being a large diameter explosive, it is suitable for quarry and mining operations. Because of its high power, it is most suitable to push away toe-burden. A perfect match of mecforce (h) is mecpower ii or mecpower i. A suitable combination of these products can include maximum shattering effect to rock. It is suitable for hard to very hard rock or where large throw of rock is required.technical data:-density : 1.15 to 1.25 gm/cc v.o.d. : 4000 to 4800 m/sec. Sensitivity : sensitive to no. 6 or no. 8 detonators, detonating fuse & ray - det. Classification : class ii explosives suggestion : under extreme temperature conditions, mecpower (h) like all other slurry explosive should be kept in its protective packing box until actual use. Packaging : supplied in different sizes of strong polyethylene cartridges to meet different loading conditions.

Characteristics :-mecforce(c) is an aluminized cap sensitive primer. Its well gel consistent, gives high loading density and maximum energy transfer to surrounding rock.it is highly water resistant & also provides high degree of safety from impact and friction. It produces minimum noxious fumes on blasting. Gel is rigid, well cross linked.application :- mecforce(c) is large diameter explosives for quarrying and open pit mining. It can be used with mecpower-i, mecpower-ii, mecpower-iii and mecpower-iv. It is suitable to break medium hard to hard rock and coal.technical data:-density : 1.1 to 1.2 g/cc v.o.d. : 3500 to 4800 m/sec. Sensitivity : class ii explosive. Suggestion : under extreme temperature conditions, mecpower (c) like all other slurry explosive should be kept in its protective packing box until actual use. Packaging : supplied in different sizes of strong polyethylene cartridges to meet varying loading conditions.

Characteristics :-mecforce is an aluminised cap sensitive primer used to initiate non cap or cap sensitive explosives in bore holes. It's gelled consistency gives excellent bore hole coupling which results in high loading density and maximum energy transfer to surrounding energy transfer to surrounding rock. Mecforce is highly compatible with water and provides high degree of safety from impact and friction. It produces minimum noxious fumes on blasting. Gel is rigid, well cross linked, and resistant to water.application :- mecforce is a large diameter explosive used for quarrying and open pit mining. Its perfect match in bore hole is mecpower - I and mecpower - ii is suitable for breaking medium hard to hard rock and coal. technical data:- density : 1.05 to 1.25 gm/cc v.o.d. : 3700 to 4700 m/sec. Sensitivity : sensitive to no. 6 or no. 8 detonator, detonating fuse & ray - det. Classification : class ii explosives suggestion : under extreme temperature conditions, mecforce like all other slurry explosive should be kept in its protective packing box until actual use. Packaging : supplied in different sizes of strong polyethylene cartridges to meet different loading conditions.

Introduction :-in a conventional system of initiating the column charge by df, a small amout of explosive around the df is desensitised due to viloent detonation of df as it contains very high explosive charge (generally 10 grm/m ) & does not give bottom initiation to the column charge.to overcome this drawback, ama industries pvt. Ltd. Proudly introduces mecdet- a non electric initiating system.a variety of tube length & delay timing to suit particular requirment are offered by us.due to its non-disruptive tube it completely elimintes the desensitisation of explosive, avoids stemming ejection of charge, gives true bottom initiation & proves economical over the conventional system.introduction :-in a conventional system of initiating the column charge by df, a small amout of explosive around the df is desensitised due to viloent detonation of df as it contains very high explosive charge (generally 10 grm/m ) & does not give bottom initiation to the column charge.to overcome this drawback, ama industries pvt. Ltd. Proudly introduces mecdet- a non electric initiating system.a variety of tube length & delay timing to suit particular requirment are offered by us.due to its non-disruptive tube it completely elimintes the desensitisation of explosive, avoids stemming ejection of charge, gives true bottom initiation & proves economical over the conventional system. characteristics :- mecdet consists of a shock tube with delay detonator.shock tube is a plastic tube 3.0 mm outer diameter and 1.2-1.4 mm inner diameter, specially developed for the purpose to withstand 20kg load without breakage and has very high abrasion resistance.end of the tube is hot sealed to ensure water profness and the other end is crimped to the detonator.the velocity of detonation of tube is 2000 +/- 200 m/sec.delay timing of the assembly is precisely controlled and tested in house.mecdet is tested for various performance & saftey tests. (for more detal please consult us)advantages :-user friendly - it is provided with suitable connectors to facilitate easy & quick connection. Saftey in handling - being a non electric system it is immune to stray current & high radio frequencies thus improved safety. Economy - true bottom initiation of column charge.due to non disruptive tube, desensitisation of explosives does not take place.flexiblity in delay interval & virtually any number of holes can be connected & blasted in a single shot.effective ''in hole '' delay system can be provided if required.all these factors add to the economy of blasting & increased output per charge of explosives. Enviorment - due to very low explosive charge in the shock tube it reduces noise and groud vibration. Mecdets come with a range of dely timming & shock tube length to suit the specific customer requirment.mecdets are available in surface & hole delays.mecdet surface - 17 ms, 25 ms, 42 ms, 67 ms.mecdet hole - 200 ms, 250 ms, 300 ms, 350 ms, 400 ms, 450 ms, 500 ms.shock tube length vary from 3 mtr to 24 mtr.mecdets are properly identified by putting delay time & length tags on the coil. packaging :-5 to 10 coils of mecdet are packed in one paper envelop. It is properly marked with delay time,tube length. These envelopes in turn are packed in cardboard boxes marking the delay time & tube length .storage :-this product must be stored in licensed detonator magazine following all statutory & regulatory norms & taking due saftey precaution.handling :-this product must be handled by qualified, authorised persons only.lack or insufficient knowledge may lead to misfire of product, can cause fatal injury to the person handling it.for any clarification, information or assistance please contact our technical service representative, sales and technical manager.

We are providing helmet at the affordable prices.

We are providing hand operated siren at the affordable prices.

We provides goggles at the reasonable prices.

Portable Magazines manufactured by us are approved by the Chief Controller of Explosives and are highly economical. Unlike massonary magazines, these can be installed within hours and can be shifted to a new site once work is over, thus saving fresh investment and time. We have Portable Magazines of various capacities to suit the need of all types of explosives users. 

Exploder tester is a very useful instrument for checking whether the exploder is in working order or not. Normally blaster has a habit of short circuiting the terminal to check whether the exploder is in working or not. This damages the exploders.exploder tester is a simple instrument which has to be just connected to the exploder output terminal. The exploder is then charged and fired. If neon of exploder tester flashes, the exploder is ok, otherwise check the exploder.the cost of the instrument is less than the cost incurred for one time repair of exploder. Exploder tester can be used for testing exploder of any make.

We market 12,30,100 & 200 shot state of art "ama" brand exploder. These exploder have charge, continuity and low battery indicator. The units are rechargeable type.

We provides earmuff at the reasonable prices.