Humidity Chamber Dealers in Nashik (7 products available)

Temperature Range : 20°C - 60°C

Humidity Range : 40%RH - 95%RH

Accuracy : +0.2 °C / +2.0 % RH

Uniformity : +1.0 °C / +3.0 % RH

Test suitable for : 25°C & 60%RH, 30°C & 65%RH,

Brand Name : Mack

Specially designed chambers for Low Humidity conditions, such as 25°C & 40%RH, 40°C & 25%RH, 30°C & 35%RH. Optional Features GSM TECHNOLOGY HOOTER SYSTEM EXTRA TRAY Features Construction : Chamber interior is fabricated of stainless steel with dull finish & exterior is of stainless steel / G.I. Powder coated. The inner working chamber is water & vapour tight high-grade stainless steel. All seams are arc-welded & passivated for strength & durability. Modular type prefabricated metal sectional panels are lightweight for easy handling and also fit through standard doorways, easily transported and assembled /disassembled for relocating the room. Full View Glass Door : Full door is of toughened glass with polysulphide to view the samples without disturbing the test conditions & human safety. Trays & Racks : Heavy duty solid stainless steel duly electro polished wiremesh type trays are provided which are easy to clean, time & effort saving, adjustable for convenience, along with detachable racks with adjustable angles. Scanner : For Validation purpose Temp / Humidity multipoint Scanner can be provided with printer & PC interface facility. 21 CFR PART-11 Compliance Log data, Event data, Audit Trail data, E-Records & E-signatures, Graphical analysis& Data acquisition. Stand by Refrigeration & Humidity SystemTwo steam generators and two water reserve tanks are provided. In case of any system failure or breakdown the stand by system is switched over automatically without disturbing the test condition.  

Temperature Range: : 20°C - 60 °C

Humidity Range: : 40%RH - 95%RH

Accuracy: : +0.2 °C / +2.0 % RH

Uniformity: : +1.0 °C / +3.0 % RH

Test suitable for: : 25°C & 60%RH, 30°C & 65%RH,

Specially designed Chambers for Low Humidity conditions such as 25°C & 40%RH, 40°C & 25%RH, 30°C & 35%RH.   Stability Chambers are used in performing “Stability Studies”. Stability studies provide an evidence on the changes in the quality of product with Time, under the influence of varied environmental factors: Temperature, Humidity.Evaluation of product (API or Formulations) under recommended storage conditions, ( with appropriate tolerances) that test its “Thermal Stability” & if applicable, its sensitivity to moisture.In simple words, Stability can be expressed as: “The capacity of a drug to remain within specifications established, to assure its Integrity, Strength, Quality & Purity”     Features: ConstructionInner Working Chamber is fabricated of “Stainless Steel” (matt finish) & Exterior is of G.I. Powder coated OR stainless steel: sSS304 or SS3016 according to the needs of client or user.The inner working chamber is water & vapour tight high-grade stainless steel. All seams are arc-welded & passivated for strength& durability.Full View Glass DoorSingle Door with a “Viewing Window” (of Toughened Glass) for easy inspection & viewing the samples without disturbing the set environmental conditions of the chamber (by opening the door).IlluminationInner working chamber is provided with a fluorescent tube for illuminating the chamber to view & inspect samples visuallyLeveling Legs“Bullet feet” ensures easy mobility during installation & cleaning. Bullet feet are specially designed for longer life under heavy load with built in screwing adjustment “for accurate horizontal levelling of the chamber).TraysHeavy duty solid stainless steel duly electro polished perforated trays are provided, which are easy to clean, saves time & efforts while cleaning, & also height adjustable for convenience with the help of channels.(Height Adjustable every Half an inch)21 CFR PART-11 ComplianceLog data, Event data, Audit Trail data, E-Records & E-signatures, Graphical analysis& Data acquisition.     Optional Features: STAND BY REFRIGERATION SYSTEMSTAND BY STEAM GENERATOR SYSTEMSCANNERGSM TECHNOLOGYHOOTER SYSTEMEXTRA TRAY  

Temperature Range : Ambient to 40ºC/45ºC ± 2ºC.

Humidity range : Ambient to 95% ± 3%.

Construction : – Double walled outer M.S. sheet duly powder coated. Inner Aluminium/Stainless Steel with 2/3 Nos. adjustable shelves duly perforated. Having heavy duty M.S. Stand. the door is an impressive structure having glass window & sealed by Rubber Gasket. Gap between the walls is filled with glass wool insulation.   Panel: – Consists of Temp. Controller i.e. by thermostat of Digitally controlled by Thermostat/Digital Humidity Controlled by imported humidistate placed inside the chamber. Supplied with Hygrometer to check exact Humidity inside the chamber.   The Temperature is recorded on the “L” shaped thermometer fitted at the front of the cabinet. The water tank is provided at the bottom and the steam is circulated by water pump/motor fitted at the of the chamber.   Suitable to work on 220/230 volts A.C. Supply.

We are offering humidity chamber. Technical specification temperature range: 20°c - 60 °c humidity range: 40%rh - 95%rh accuracy: +0.2 °c +2.0 % rh uniformity: +1.0 °c +3.0 % rh test suitable for: 25°c & 60%rh, 30°c & 65%rh, 40°c & 75%rh, 30°c & 75%rh

Accuracy : +0.2 °C / +2.0 % RH

Temperature Range : 20°C - 60 °C

Humidity Rang : 40%RH - 95%RH

Uniformity : +1.0 °C / +3.0 % RH

Test suitable for : 25°C & 60%RH, 30°C & 65%RH,,, 40°C & 75%RH, 30°C & 75%RH

Specially designed chambers for Low Humidity conditions, such as 25°C & 40%RH, 40°C & 25%RH, 30°C & 35%RH. Optional Features GSM TECHNOLOGY HOOTER SYSTEM EXTRA TRAY

Humidity range : 40%RH - 95%RH

Accuracy : +0.2 °C / +2.0 % RH

Temperature Range : 20°C - 60 °C

Uniformity : +1.0 °C / +3.0 % RH

Stability Chambers are used in performing “Stability Studies”. Stability studies provide an evidence on the changes in the quality of product with Time, under the influence of varied environmental factors: Temperature, Humidity.Evaluation of product (API or Formulations) under recommended storage conditions, ( with appropriate tolerances) that test its “Thermal Stability” & if applicable, its sensitivity to moisture.In simple words, Stability can be expressed as: “The capacity of a drug to remain within specifications established, to assure its Integrity, Strength, Quality & Purity”   Features : ConstructionInner Working Chamber is fabricated of “Stainless Steel” (matt finish) & Exterior is of G.I. Powder coated OR stainless steel: sSS304 or SS3016 according to the needs of client or user.The inner working chamber is water & vapour tight high-grade stainless steel. All seams are arc-welded & passivated for strength& durability.Full View Glass DoorSingle Door with a “Viewing Window” (of Toughened Glass) for easy inspection & viewing the samples without disturbing the set environmental conditions of the chamber (by opening the door).IlluminationInner working chamber is provided with a fluorescent tube for illuminating the chamber to view & inspect samples visually.Leveling Legs“Bullet feet” ensures easy mobility during installation & cleaning. Bullet feet are specially designed for longer life under heavy load with built in screwing adjustment “for accurate horizontal levelling of the chamber).TraysHeavy duty solid stainless steel duly electro polished perforated trays are provided, which are easy to clean, saves time & efforts while cleaning, & also height adjustable for convenience with the help of channels.(Height Adjustable every Half an inch).21 CFR PART-11 ComplianceLog data, Event data, Audit Trail data, E-Records & E-signatures, Graphical analysis & Data acquisition.