Cement Dealers

The main constituents are pre-processed before they enter the factory and are therefore significantly higher in cost than clay raw materials. Strength is developed by a chemical reaction between the cement component and water. Strength continues to increase for several years. Process Routes The main manufacturing methods for concrete tiles in are • Extrusion• Wet pressing• Hand made Other techniques include• Core moulding Casting• Vibration mouldin The Process Normally tiles are produced using Pressing Technology or Extrusion. • Extrusion is a simple technique by which, the wet mix of sand and cement is extruded through an orifice in the shape of the tile and the under side is formed by the pallets.• The roller and slipper gives the shape of top surface. The Tiles produced with this technology can not have any projection on the top surface like clay tiles.• Variety of profiles for diverse living spaces and distinct regional needs Wide range of colours and shapes.

White Cement provides enamel based whiting. White Cement, we offer, has a low shrink-swell capacity. The White Cement has low cation exchange capacity (1-15 meq/100g.) White Cement is a soft, earthy, usually white mineral. Definition : Whiting is a clay mineral with the chemical composition Al2Si2O5(OH)4. It is a layered silicate mineral, with one tetrahedral sheet linked through oxygen atoms to one octahedral sheet of alumina octahedra. Rocks that are rich in Whiting are known as china clay or kaolin or kaolinite. The name is derived from Gaolin ("High Hill") in Jingdezhen, Jiangxi province, China. Whiting was first described as a mineral species in 1867 for an occurrence in the Jari River basin of Brazil Whiting is one of the most common minerals; it is mined, as kaolin, in Brazil, France, United Kingdom, Gerany, India, Australia, Korea , the People's Republic of China, and the USA. It is a soft, earthy, usually white mineral(dioctahedral phyllosilicate clay), produced by the chemical weathering of aluminium silicate minerals like feldspar. In many parts of the world, it is colored pink-orange-red by iron oxide, giving it a distinct rust hue. Lighter concentrations yield white, yellow or light orange colours. Applications : Wall : It is used to apply on wall as house, office, building for before a Painting. Consumer use)Paints : It is used in various paints like distempers, cement primer, wood primer, texture paint, spray plaster, putties, fillers & undercoats.(Industrial use)Plastic : It is used as a filler in combination with others to impart strength & smoothness in plastic Industry. (Industrial use)Rubber : It is used as manufacture any type of rubber like tyre, tube, eraser, Etc.(Industrial use Precaution to be taken before & during usage of product : Take a oil paint to Mix a Whiting, then apply to a wall as level before applying clean a wall with 150 range waterproof paper. Packing list : 1 kg, 2 kgs, 5 kgs, 20 kgs

HAC-8R is an alumina rich calcium aluminate cement ( CAC ) with 80% Al203 and very low impurities content. This cement has been indigenously manufactured as an equivalent to imported calcium refractory cements, namely SECAR - 80 and CA-25 grades.

Our grey cement have been used in industries since long.with our prime mission to set the standard material purchase, we are here for you with our most satisfying range of grey cement available at very reasonable prices.come,join us and be a part of our family and conduct a beneficial shopping from us.

A cement is a binder, a substance used in construction that sets and hardens and can bind other materials together. The most important types of cement are used as a component in the production of concrete, which is a combination of cement and an aggregate to form a strong building material. Cements used in construction are usually inorganic, often lime based, and can be characterized as being either hydraulic or non-hydraulic, depending upon the ability of the cement to set in the presence of water We are one of the leading supplier and stockist of different color and types of cement that is sourced from some of the most reputed names in the market. This cement is perfect in formulation and is highly reliable to use. It is processed by our experts at par with the international standards. We always offer a quality approved range to our clients which is checked on various parameters of quality. It is widely used in various industries for construction purposes. We are supplier of following brands : ULTRATECH CEMENT AVAILABLE IN (OPC 53/ OPC 43/ PPC /PC BULK/ PPC BULK) BIRLA A-1 AVAILABLE IN (OPC 53/ OPC 43/ PPC /PC BULK/ PPC BULK) SANGHI CEMENT AVAILABLE IN (OPC 53/ OPC 43/ PPC /PC BULK/ PPC BULK) BIRLA GOLD AVAILABLE IN (OPC 53/ OPC 43/ PPC /PC BULK/ PPC BULK) DALMIA CEMENT AVAILABLE IN (OPC 53/ OPC 43/ PPC /PC BULK/ PPC BULK) JSW CEMENT (SLAG CEMENT/ GGBS/ GBS) ZUARI CEMENT AVAILABLE IN (OPC 53/ OPC 43/ PPC /PC BULK/ PPC BULK)

KEM GROUT NS 1 is a pre-packed cementitious grout requiring only the addition of clean water to produce at the job site non-shrink multi-application grout. It is a special and unique blend of cements, micro-silica, graded sands, water reducing agents and special auxiliary chemical to deliver expansion in the plastic tate to compensate for shrinkage. It can be mixed in a range of consistencies in varying the amount of water used to produce a fluid to trowellable consistency grouts.

The company is a well-known Cements Exporter and Supplier, based in India. The Cements, that we provide, play a vital role in Building and Construction industry. Our Cements are procured from the well-known sources to ensure their higher grades. The Cements can be availed from us at the most reasonable prices.

The main constituents are pre-processed before they enter the factory and are therefore significantly higher in cost than clay raw materials. Strength is developed by a chemical reaction between the cement component and water. Strength continues to increase for several years. Process Routes The main manufacturing methods for concrete tiles in are • Extrusion • Wet pressing • Hand made Other techniques include • Core moulding Casting • Vibration moulding The Process Normally tiles are produced using Pressing Technology or Extrusion. • Extrusion is a simple technique by which, the wet mix of sand and cement is extruded through an orifice in the shape of the tile and the under side is formed by the pallets. • The roller and slipper gives the shape of top surface. The Tiles produced with this technology can not have any projection on the top surface like clay tiles. • Variety of profiles for diverse living spaces and distinct regional needs Wide range of colours and shapes.

Grey Portland Cement, Bauxite Ore, HMS Scrap, Nichrome Alloy, Scrap Meta

Silica Cement, Colored Sand, Portland Grey Cement, Quartz Silica San

Reinforced Concrete Cement, Trimix Flooring, Erection and Fabrication Wor

Slag Cement, Gray Cement, Cement Clinkers, Quartz Silica San

PVC Cemen

Galvanized Iron Channels, Plaster Of Pari

Construction Chemical, Stee

Packed Cemen

Gypsum Products, Construction Materia

Concrete, Paving Bloc

Aluminium Products, Carbon Black, Fertilisers, Mining, Sponge Iro

UltraTech Cement, Paints, Ready Mix Concrete, Concrete Chimne

Bricks, Construction Material, Sand, TMT Bar