Intech Fire & Security Airoli, Navi Mumbai, Maharashtra

4-20 mA analog transmitter without display SIL2 capability for LEL, O2, CO, H2S, NH3, CO2 Detects combustible, toxic or refrigerant gases and O2 Available with electrochemical, infrared or semi-conductor sensors Designed for industrial applications Available in explosion-proof or intrinsically safe versions, and stainless steel A high-temperature version allows operation up to 200°C

Certification : Explosion-proof

Application : Industrial

Gases Detected : Combustible

Designed to meet NFPA low-frequency signaling requirements for unattended sleeping areas, the TrueAlarm 520Hz Sounder Base is a perfect solution for hospitality, education, and multi-occupancy residential applications. It offers an efficient, cost effective way to upgrade existing systems to NFPA compliance with minimal disruption.

Application : Hospitality, Education

Compliance : NFPA

Efficiency : Efficient

Compatible with Detcon RXT & CST Tranceivers 32 channel capacity panels Real time 4 line 40 character LCD Field device status and location tag Alarm condition LEDs and optional strobe & horn Non-intrusive operator interface

Application : Industrial Monitoring And Control

Status Display : Field Device Status And Location Tag

Alarm Indicators : LEDs,optional Strobe & Horn

Operator Interface : Non-intrusive

Water-Proof Corrosion-Proof Vibration-Proof Multi-Layer Surge Protection Up tPre-emptive Fault Diagnostics

Material : Water-Proof,Corrosion-Proof

Application : Gas Detection

Surge Protection : Multi-Layer

Fault Diagnostics : Pre-emptive

Simple user interface Full bump, calibration and charging options Can monitor, transmit and control Bump/calibration results storage Stand-alone, PC or Ethernet options Robust construction

Application : Monitoring,Transmitting

Interface : Simple User Interface

options : Full Bump, Calibration

Storage : Bump/calibration Results Storage

Simple user interface Full bump, calibration and charging options Can monitor, transmit and control Bump/calibration results storage Stand-alone, PC or Ethernet options Robust construction

Application : Monitoring, Transmitting

When water comes into contact with the detection cable a control unit can detect changes in the electrical characteristics of the cable and signal an alarm or other action. The sensor cable is available in pre-terminated lengths for simple assembly and extension. Non-sensing pre-terminated lengths are also available when the cable is to pass through areas which do not require protection.

Packaging : Pre-terminated Lengths

Usage : Detecting Water Leaks

Length : Varies

Diameter : Varies

"The ProReact range of digital linear heat detection cables is designed to trigger a response when a specific temperature is reached. If the temperature surrounding the cable reaches the activation temperature the two cores quickly come into contact and trigger an alarm. These cables are known as ‘digital’ because they are ‘off’ below the activation temperature and irreversibly switch ‘on’ when the activation temperature is reached." The ProReact range of digital linear heat detection cables is designed to trigger a response when a specific temperature is reached. If the temperature surrounding the cable reaches the activation temperature the two cores quickly come into contact and trigger an alarm. These cables are known as “digital” because they are “off” below the activation temperature and irreversibly switch “on” when the activation temperature is reached. The following alarm temperatures are available:

Temperature Trigger : Specific Temperature

Activation Method : Two Cores Come Into Contact

Activation Type : Irreversible Switch

Activation Condition : Temperature Reaches Activation Temperature

We offer the Olct 60 Analog Transmitter, a reliable solution for accurate temperature measurement. This transmitter comes in a sturdy box packaging, operates on a 24V DC power supply, and provides a 4-20mA output signal. With a measurement range of -50 to 150 degrees Celsius and an accuracy of ±0.5% of full scale, it ensures precise monitoring in various industrial applications. Ideal for distributors seeking quality temperature sensing solutions, the Olct 60 Analog Transmitter is a dependable choice for efficient and effective temperature control.

Packaging : Box

Power Supply : 24V DC

output signal : 4-20mA

Measurement Range : -50 To 150 Degrees Celsius

Accuracy : ±0.5% Of Full Scale

Digital transmitter without display Available with catalytic bead or electrochemical sensors Detects O2, combustible gas, and toxic gases Available for detection of O2, CO2, H2S, NH3, NO, NO2, Methane, Propane, Butane and Hydrogen For commercial and light industrial applications (laboratories, cooling rooms, hospitals, boiler rooms, waste water treatment plants, etc.) ATEX 3G certified for use in zone 2 For use only with the MX43 controller

Application : Commercial

Detects : O2,Combustible Gas

Available Gases : O2,CO2,H2S,NH3,NO,NO2,Methane,Propane

Recommended Applications : Laboratories,Cooling Rooms

Analog and digital controller 4 or 8 lines, up to 32 detectors Up to 32 fully programmable relays (OR, AND, NAND, NOR, Voting functions) Large graphic display Remote modules (cost savings on wiring installation) USB Data logging capability RS485 Modbus RTU and multiple analog outputs SIL-1 Certified to IEC/EN 61508 and EN 50402 functional safety standards

Detectors Supported : Up To 32 Detectors

Relays Supported : Up To 32 Fully Programmable Relays

Relay Functions : OR, AND, NAND, NOR, Voting Functions

Display Type : Large Graphic Display

Excellent false alarm immunity Wide field of view Through lens optical check 4-20 mA and relay ouptuts as standard 4-20 mA Hart option SIL 3 Certified

Field Of View : Wide

Optical Check : Through Lens

Output Options : 4-20 MA

Safety Integrity Level : SIL 3 Certified

TrueAlarm Multi-Sensor Devices combine the established performances of a TrueAlarm photoelectric smoke sensor with a TrueAlarm thermal sensor to provide both features in a single sensor/base assembly. Smoke and thermal activity are correlated to provide intelligent fire detection earlier than either activity alone.

Power Source : Electric

Packaging : Box

Sensors : Photoelectric Smoke Sensor

Assembly : Single Sensor/base Assembly

Powerful audible alarm (103 dB @ 1m) Run time of up to 170 hours More than 4-month datalogging capacity Easily transportable - less than 7 kilos 2.4 GHz frequency 30 Devices per network MX 40 Up to 32 Devices, Wired or Wireless Up to 16 BM 25 Configurable up to eight zones Alarm and Fault Condition LEDs

Frequency : 2.4 GHz

Data Logging Capacity : More Than 4-month

Weight : Less Than 7 Kilos

Network Devices : Up To 30 Devices

Detects Explosive and Toxic Gas, or Oxygen Non-Intrusive Calibration Smart Infrared Gas Sensors HART Communication Protocol (NEW) MODBUS Communication Programmable Relays Dual Gas Sensing

Application : Industrial Gas Detection

Communication Protocol : HART,MODBUS

Relay Type : Programmable

Sensing Type : Dual Gas

TrueAlarm addressable heat sensors provide rate-compensated, fixed-temperature sensing, selectable with or without rate-of-rise temperature sensing. Due to its small thermal mass, the sensor accurately and quickly measures the local temperature for analysis at the control panel. Rate-of-rise temperature detection is selectable at the control panel. Fixed temperature sensing is independent of rate-of-rise sensing.

Model : 4098-9733

Sensing Type : Rate-compensated

Temperature Sensing : With Or Without Rate-of-rise

Temperature Measurement Speed : Quick

Temperature Measurement Accuracy : Accurate

The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants.

Application : Industrial Gas Detection

Packaging : Box

Response : Effective

environment : Wide Range Of Industrial Environments

The FLAMEVision flame detectors use patented IR array and triple IR solar blind technologies to provide reliable and cost effective fire detection solutions. FLAMEVision can be trusted in high dependency situations where fast acting and accurate flame detection is essential. FLAMEVision detectors offer superior performance in all weather conditions and all lighting situations with the added benefit of fire event location information provided by the IR array. FLAMEVision can protect all hydrocarbon risks in non-hazardous and classified hazardous explosive atmospheres. There is a wide range of system design options available including several monitoring and control interface types and integrated video camera for verification purposes. Installation and maintenance

Weather Conditions Performance : All Weather Conditions

Lighting Situations Performance : All Lighting Situations

Fire Event Location Information : Provided By IR Array

Protection Coverage : Hydrocarbon Risks

Using water as a fire suppressant in areas where electronics operate and irreplaceable, high-value assets are stored, could be as devastating as fire itself. The SAPPHIRE Clean Agent System quickly suppresses fires and protects sensitive equipment without causing harm to people or the environment. The system is especially suited to suppress fires in areas where an electrically non-conductive medium is required, where electronic systems cannot be shut down in an emergency, where cleanup of other agents poses a problem, and in normally occupied areas that demand a non-toxic agent. Here we use FK5112/Novec1230 fire protection fluid for total flooding applications. The clear, colorless agent has zero ozone depletion potential, an atmospheric lifetime of just five days, and a global warming potential of 1.0. System suppresses a fire before it can be fully engaged and once the fire is suppressed, FK5112/Novec 1230 quickly evaporates without harming any valuable assets​​​​.

Application : Total Flooding Applications

Feature : Quickly Suppresses Fires

Environmental Impact : Zero Ozone Depletion Potential

Suitable For : Areas Where Electronics Operate

Auto-Aligns – using the integrated user interface – just steer the laser onto the Reflector, then at the flick of a switch, it aligns itself. 8 times faster than previous detectors One person installation – everything can be done by one person One standalone product – no specialist tools required; minimal prior knowledge and training needed

Alignment Method : Auto-Aligns Using Integrated User Interface

Alignment Speed : 8 Times Faster Than Previous Detectors

Installation Requirement : One Person Installation

Installation Tools : No Specialist Tools Required

Self-healing mesh network topology Universally accepted 2.4 GHz non-licensed frequency Low power gas detection sensors with built-in transceivers Built-in display for gas sensor/field device HM Disposable battery packs

Frequency : 2.4 GHz

Licensed : Non-licensed

Power : Low Power

Transceivers : Built-in

Low Power Gas Detection Sensors Built-in Display Class I, Div. 1, Groups B, C, & D Non-intrusive Magnetic Interface Built-in Diagnostics Fully Encapsulated Electronics Electropolished 316SS Construction Quick Thread Release (for sensor replacement)

Usage : Gas Detection

Power : Low Power

Display : Built-in

Interface : Non-intrusive Magnetic

The CO Sensor Base is the ideal solution for detecting toxic CO gases in critical areas, such as residential properties, dormitories, hotels, nursing homes, and assisted living facilities. The CO sensor base has a replaceable CO element that can either work independently as a toxic gas detector or be combined with a photo or heat sensor to provide a method to reduce unnecessary alarms from common sources such as steam from showers, aerosols from personal care products, cooking materials, dust, and exhaust fumes. The CO sensor base does not require a separate device to be mounted on the wall or ceiling. An smoke or heat sensor can plug into the base with the CO sensor element, saving mounting space as well as installation costs compared to using two independent units.

Compatibility : Can Be Combined With A Photo Or Heat Sensor

Connectivity Technology : Plug-in

Model Number : 4098-9770

Beam Detectors are used to provide open-area smoke detection in situations where it is either impractical or not cost-effective to use traditional point-type detectors or aspirating smoke detection. Some common applications include warehouses, atriums, convention centers, shopping malls, and sports arenas. The Addressable Beam Detector provides enhanced command, control, configuration and status/event reporting between the detector and the fire alarm control panel. Configuration, installation, diagnostics, service, and maintenance are simple and fast, saving time and money for contractors, installers, and building owners. It is compatible with 4100ES and 4010ES fire alarm control panels.

Compatibility : Compatible With 4100ES

Configuration : Easy Configuration And Status/event Reporting

Command Control : Enhanced Command And Control Features