Parker Hannifin India Pvt, Ltd Mahape, Navi Mumbai, Maharashtra

Workstations hose assembly work stations is an optimal way to organize and increase productivity while manufacturing hose assemblies. These Workstations are ideal for plant hose assembly production sites and over-the-counter business locations. Choose from the following options to meet your specific needs:

For our Wing Tank Fuel Pump, the main pumping element is a centrifugal impeller driven by a three-phase variable frequency induction motor, with the input frequency varying between 360 and 800 Hz. The canister is installed on the wet side of the spar with the pump element installed into the canister from the dry side; this allows the element that contains the motor and bearings to be replaced without draining the fuel tank.

Vise Crimper Dies are designed for use with Parker bench-mounted vise crimpers for quick and easy fabrication of low pressure, small diameter industrial hose assemblies, Series 662-T

Feature : Fixed dies eliminate the need for setting adjustments. • Wide range of sizes for maximum coverage

Application : Accessory

Universal Kit promotes simplicity and convenience by providing all of the necessary materials to create an easily installed combination power splice and tee for SL and SH Series Self-Regulating Temptrace™ Bundles

Ultra Clean System removes contaminants from inside hydraulic hose assemblies, thereby reducing the risk of downtime resulting from clogged filters, component malfunctions and hose failure.

The two hand control modules are used in applications that require both the operators hands to be occupied before a pneumatic signal is sent in an automation system. Pneumatic signal is generated only if both push buttons are activated within 0.5 seconds

twin-lined non-conductive hydraulic tool hose for aerial lift trucks in the utility market. The coiled design offers excellent flexibility, even in cold temperatures and it is self-retracting.

Twin Housing Lightweight, Portable Handcart Filter Pumps for Removal of Water, Dirt, and Other Contaminants from Oils and FuelsThe operator can manually switch the oil flow from one housing to the other at his option. This is very useful when down-time is critical. The oil can filter through one side while the cartridge is being changed in the other housing with little or no interruption of oil flow.

When thrust reverser deployment is commanded, the transcowl locking system electromechanical actuator will be energized. This will unlock the TLS pawl from the transcowl structure load plate within 200 ms. The redundant proximity switches in the TLS will send an unlock signal to the electronic engine control before the pawl moves through the position where it would be incapable of carrying load. At the same time, a lever arm on the TLS pushes the visual indicator (installed on the fan cowl door) to an extended position, indicating that the TLS is unlocked.

Feature : • Failure of the TLS defaults the pawl to the locked position • Locking and unlocking of the TLS pawl from the transcowl structure load plate within 200 ms

tractor-trailer hose assemblies combine both tractor-to-trailer service and emergency lines into a strong, single unit.

Feature : NPT swivel fittings reduce hook-up time • The single unit provides clean and neat installation

Truck Coils,hoses are supplied as ready to install, pre-assembled kits and include spring guards and male pipe NTA brass fittings. A kit consists of both a red and blue tube assembly. Special pipe thread sealant is factory applied and there is no cutting or assembly necessary. Just attach the gladhands (sold separately or pre-assembled).

The Sporlan Type G-EG thermostatic expansion valves have a forged brass body. The G valve has flare fittings and the EG valve has extended ODF connections. Both valve types are available with adjustable superheat, long lasting replaceable power element and accessible internal parts. Each valve is factory tested to ensure positive leak-free performance.

PTFT kits provide a water tight seal during installation of Parflex Temptube™ and Temptrace™ bundles. PTFT kits provide an exceptional method for installing Parflex bundles in instrument enclosures, a junction box or cabinets. Review the literature listed under the Product Support tab for order details and installation instructions.

Noise dampening capabilities Improved resistance to vibration tranmissibility Excellent moisture ingression properties Excellent flexibility and kink resistance Aluminum steel ability with multiple bend and custom end connections

The tail wheel assembly can be on tricycle-type landing gear, as well as conventional gear with the tricycle gear being the most common. Tail wheels are designed to support a portion of the load requirements for the aircraft along with the main wheels, and are steerable on some aircraft.

Feature : Low maintenance for tubeless or tube-type • Tapered roller bearings for dimensional stability and long life • Molded grease seals for superior bearing bore sealing properties

Material : Cast Magnesium or aluminum; forged aluminum

High Moment Rodless, electromechanical linear actuator series is one of the most user friendly and versatile actuator lines on the market today. With 5 different frame sizes, 2 different drive train options, multiple mounting, carriage and sensor options, and an IP54 protective cover option, along with a multitude of other customizable features the HMR was truely designed with flexibility in mind.

High Moment Rodless, electromechanical linear actuator series is one of the most user friendly and versatile actuator lines on the market today. With 5 different frame sizes, 2 different drive train options, multiple mounting, carriage and sensor options, and an IP54 protective cover option, along with a multitude of other customizable features the HMR was truely designed with flexibility in mind.

Oil Level Controls were developed to offer the refrigeration industry an oil level control system if the highest quality. The controls, when matched properly, maintain a minimum oil level in the compressor crankcase during all phases of system operation. Each product is factory tested to ensure trouble-free performance.

The Superheat control provides true pressuretemperature superheat control via EEV utilizing Sporlan’s unique control algorithms, while the subcool control replaces mechanical subcooling that combines liquid temperature control and minimum superheat control. The temperature and pressure controls allow precise control of air temperature and pressure using electric valves (SDR and CDS).

Splice Kits for Temptrace™ Bundles have been designed to provide a long-lasting, weatherproof thermal insulation and a durable jacket over a tube fitting or instrument connection. There are sufficient tools and materials within each splice kit to insulate two splices or bundle ends.

Spider nozzles are able to provide larger coverage areas than conventional pressure-swirl or impact-type nozzles because they have two, four, six, eight, or 12 spray points per assembly. Using fewer bosses and less piping, these nozzles offer quicker installation, lighter weight, and lower installation and maintenance costs.

Refuel shutoff valves such as the one above are mounted to a vertical rib and are designed with several features that are required in today�s demanding aerospace needs (i.e. FAR25.981, windmilling & engine blade out). This style of valve is also designed to keep surge pressure low when the valve is commanded to shutoff, thus protecting any downstream equipment. With its low pressure drop and low leakage rate, this valve is an ideal choice when properly selected for the right application.

Feature : Able to withstand high vibration levels • Less than one pound weight

On the solenoid bank, each of the solenoid valves separately controls the feed of high pressure servo air to a single pneumatic valve. The valve is actuated by selectively energizing the corresponding solenoid to allow servo air to the servo port of the valve. To return the valve to its fail-safe position, the solenoid is de-energized to vent the servo port of the valve to ambient.The solenoid bank is designed with an inlet port, a single servo line to each of the pneumatic valves, and independent vent passages for each solenoid.

Truck hoses connect trailer service and emergency lines with the cab. They are supplied ready to install, in pre-assembled kits that include spring guards and male pipe end, NTA brass fittings.

Autoclave's high pressure Sour Gas Service (SOG) tubing is capable of operating to 30,000 psi (2068 bar) and range in size from 14" to 916" tube size. Tubing is manufactured from annealed stainless steel.

Material : 6Mo