Powermaster Ltd. Turbhe, Navi Mumbai, Maharashtra

We are highly involved in offering finest quality array of Turk Head Brush to our esteemed patrons. Fabricated by making use of premium quality material which is been purchased from certified vendors of the industry. Before offering these brushes to patrons, our quality auditors strictly examine these products in adherence set with industry norms & standards.

These high speed steel Titanium Nitride coated tools are ideal for smooth and accurate reaming of holes in tube sheets of Condensers, Coolers and Heat Exchangers.High speed steel, cryogenically treated and coated with Titanium Nitride for long life.Ideal for heat exchanger and condenser tube sheet reaming.

We are offering tube sheet hole reamer. These high speed steel titanium nitride coated tools are ideal for smooth and accurate reaming of holes in tube sheets of condensers, coolers and heat exchangers. features of tube sheet hole reamer high speed steel, cryogenically treated and coated with titanium nitride for long life. ideal for heat exchanger and condenser tube sheet reaming. reamers available in mm sizes also. also available on diameters upto 4”.

Used to collapse tube and drive out collapsed tube from tube sheet with a chipping hammer. Recommended for use on 16G and thinner tubes. Available on 01 and 06 shanks as standard. Suffix model number with shank number when ordering. Example for 34” O.D. 16G, 06 shank, model number will be CT-750-06. Collapsing tools are available for mm tube sizes and larger tube sizes. Please enquire.

This is never the case. Practically, the supply voltages vary as much as 20% to 25%. This directly affects the expansion results as the drive trips at a set current. That means for a 20% higher supply voltage, the tubes will be effectively expanded by 20% more torque than the required one using the electric tube expansion systems. Hence tubes will be over-expanded. For supply voltages less than normal, tubes will be under expanded proportionately

Heavy duty motors from Germany, form the heart of these drives.Continuous cycle operation vs. Intermittent cycle operation of drives from other manufactures.

Enlarges the ends of copper, brass, and aluminum tubing so that another tube of same size may be inserted into expanded section and soldered for leak-resistant joint. Expanders are designed to leave 0.015 " clearance for slip fit. Average depth of expansion is 34 ".

Features of "an" series tube expander use : oil coolers, radiators and other apparatus with small diameter tubes. advantages : captive mandrel - eliminates nut on mandrel tip which prevents scratching of tube i.d. increased feed angle makes it the fastest operating tool on the market, ideal for high production environments.

We are offering features of 'tef' series tube end facer tool bits coated with titanium nitride to give 3 times the life of conventional tool bits. ideal for quick facing of projecting tube ends in heat exchangers, condensers and boilers. one size of tool is suitable for use on multiple tube thicknesses by interchanging pilot. (tef-375 is the exception with the tool suitable for one tube id only). each tool is supplied with a set of multiple pilots to cover all tube thicknesses. tube end facers for mm sizes of tubes also available.

The Internal Tube Cutters PR-68 is driven via the square in a clockwise direction using either an electric, pneumatic or hydraulic driving machine.PR-68 type tube cutters are available in standard reach of 4” (101.6mm). Additional reaches in increments of 4” are available up to 16” (406.4mm).

In most cases hard Tube Scrubbers are recommended for removing light to medium deposits in condensers. They work by being 'Shot Thru' the tubes with a high pressure air gun.Scrubbers are shot thru tubes with a gun using compressed air and water.

Used for insertion of long and heavy tube bundles into the shell of heat exchangers. Two fully automatic pull pistons are used to push the tube bundle into the shell. The pulling pistons slide on a biaxial positioning frame horizontally as well as vertically to position the pull pistons as per the diameter of the tube bundle. The unit can be easily converted into twin headed continuous tube puller or extractor.

Used for removing soft scales in ferrous tubes (carbon steel, stainless steel) and non-ferrous tubes (copper, brass, plastic, etc.) and for final 'finishing' of tubes.Used for removing soft and light scale deposits in ferrous tubes (carbon steel, stainless steel, etc.)

powermaster torque wrenches have proved themselves both reliable and accurate over many years of full service, mastering every conceivable nut tightening operation in all areas of industry. powermaster torque wrenches are available in following three types:in built ratcheting mechanism provisional for ease of operation without effecting accuracy and life.

Standard reaction arms are included with each tool. Long or deep reaction arms are used when standard arms fall short in length. Welding rings are used to make custom reaction arms by welding the extensions to the spline ring.

It is a simple gear box, works on the principle of ‘Epicyclic Gearing’. The given load at the input gets torque multipliers as per the multiplication factor and transmitted at the output, there by with a minimum efforts you achieve greater load.Torque Multipliers will be applied most accurately when it is applied smoothly and slowly. Torque Multipliers enable this by removing much of the physical effort from the tightening task.

We are offering torque controller. Features of tcw-09-pc torque controller fully solid state design - no moving parts - no wear and tear of parts - no noise - consequently long life. uses one main circuit board for easy maintenance. accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results. soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases. connected drive is automatically recognised and indicated by means of led on the torque controller. trip time adjustable from ( 0 sec to 10 secs.). adjustable reverse time from ( 0 sec to 90 secs.). drive toque adjustable in reverse rotation with surface to set torque. hand (trigger) mode or foot switch mode, both are available. expansions can be carried out either in single cycle mode or auto repeat mode. automatic indication on the display for controllers tripping due to voltage or current fault. electronic over current protections incorporated for all four drives. over voltage protection at 275 volts and under voltage protection at 180 volts.

Bolt Tensioning using Bolt Stud Tensioners is now the preferred method of tightening bolts & stud on all critical applications. PST range of Bolt Stud Tensioners by Powermaster provides optimum solutions to bolt tensioning requirements.

POWERMASTER Torque Wrenches have proved themselves both reliable and accurate over many years of full service, mastering every conceivable nut tightening operation in all areas of industry.

We offer Spring Balancers Swf Series. SWF series balancers are now fully enclosed & are provisioned with a body liner to prevent damage to body.

We have been Indian manufacturer and exporter of Double Spiral Brush for boiler tube cleaning and chiller tube cleaning.

We are the leading manufacturer of industrial brush roller, where brush roll is made after doing ebonite coating on roll to avoid resting on steel surface. It is mostly used for cleaning of blankets and brushing. Industrial brush roller is most demandable by clients as it is easily usable and washable as it comes in variety of abrasive types, grits and sizes.

The depth of the Hex openings is designed to accomodate the full standard fastener head.All Impact Sockets have a Ring-N-Pin arrangement for securing them to the drive.Sockets are plated and black oxidized coated for increased protection from rusting.Elimination of high stress concentration points increasing the impact resistance and the torque transmitting capability.

Slug Wrenches Striking Wrenches wall and thickness optimized for heavy impact, Powermaster also manufactures castellated wrenches for use on GE turbines. Along with castellated wrench, GE turbine tools like castellated sockets, stack sockets, Striking Wrenches, slug wrenches, podger spanners, slug spanners are also manufactured.Large percentage of our revenues are spent in improving designs and life of our products. New innovations on products in this catalogue are world’s firsts - ONLY WITH POWERMASTER.