Water Treatment Systems Dealers in Noida

The processes involved in our Effective Water Treatment Plant/WTP for drinking purpose may be solids separation using physical processes such as settling and filtration, and chemical processes such as disinfection and coagulation. Biological processes are employed in the treatment of wastewater and these processes may include, for example, aerated lagoons, activated sludge or slow sand filters. Treatment Plant For Effluent Water Treatment plants are used to make water reusable by eradicating dissolved impurities present in it. We are recognized as one of the staggering WTP Manufacturer in India. We are one of the top manufacturers and suppliers of water treatment system and waste water treatment plants in India. We have Water Treatment plant designed for small medium and large scale i.e. from 1000 lph water treatment system to 40,000 lph.

Description Features Technology : Membrane Based, (Size: 8040) Electricity : 6KW440v Filtration : Suspended Solids, Chemical Impurities, Bacteria like Cryptosporidium, Pseudomonas, and Pathogens e-coli. Pre Filtration : Sand Filter, Activated Carbon Filter, Micron Filter-5 &10 Post Filtration : Ozonator Design to Work : TDS up to 10000ppm, Hardness 5600mgI Operating Mode : Automatic + Manual Monitoring Accessories : MMIC Panel, Pressure Gauges, Flow Meters etc.

in our Company increasing the throughput of an existing distillation process is an important objective of retrofit design of distillation processes. When the throughput is increased, entrainment flooding may create a bottleneck in the column. Important goals of retrofit design are to identify and remove such a bottleneck. This work develops an analysis tool for retrofit design of distillation columns. A new measure, fractional utilization of area (FUA), is proposed to identify the extent to which the area available for vapour flow on an existing stage of the column is utilized. The area utilization is assessed relative to an acceptable approach to flooding conditions in the column section. FUA is defined as the ratio of the area required for vapour flow on a stage to the maximum area available for vapour flow in the column section. An FUA curve, indicating area utilization on every stage in the column, can be generated from converged simulation results and existing sizing correlations. The FUA curve is a useful analysis tool, as it allows the bottleneck in the column to be identified and allows the effectiveness of proposed modifications to be evaluated. major Scope : Turbine train retrofit comprising of new HP/IP/LP Rotors. Redesigning of Reheater to match Retrofitted Turbine. Installation of state of art DCS"ALSPA P-320" and field Instruments. Burner management System. Associated Civil works in UCB and boiler. Operational Performance : Machine successfully tested for 120 MW and performed better than gauranteed parameters of Heat Rate and MW output. Retrofitted machine has been operating since lat five years at rated capacity. Unit has recorded continuous operation of 185 days. Achieved average PLF of appox. 95% after retrofit.

Waste Water Treatment System, Air Cooling System, ProJet Smart Bag Filte

Circulating Water Treatment Systems, Drinking Wate

Water Treatment System, Effluent Treatment Plant, Reverse Osmosis Plan

Driplex water engineering - our company is counted amongst the foremost manufacturers & exporters, wholesalers and suppliers of circulating water treatment systems in india.