Pressure Controllers Dealers

GDS Instruments Pressure Volume Controllers are general-purpose water pressure source and volume change gauges for the precise regulation and measurement of fluid pressure and volume change. Pressure applications from 0 up to 100MPa of wateroilair, with accurate measurement of volume change, all of which are capable of being logged and controlled by PC. The Enterprise Level PressureVolume Controller (ELDPC) is aimed at commercial testing (max 1MPa). The Standard PressureVolume Controller (STDDPC) is aimed at medium pressure commercial testing (

The Series DH Digihelic® Differential Pressure Controller is a 3 in 1 instrument possessing a digital display gage, control relay switches, and a transmitter with current output. Combining these 3 features allows the reduction of several instruments with one product, saving inventory, installation time and money. The Digihelic® controller is the ideal instrument for pressure, velocity and flow applications, achieving a 0.5% full scale accuracy on ranges from 0.25 to 100 in. w.c. The Digihelic® controller allows the selection of pressure, velocity or volumetric flow operation in several commonly used engineering units. Two SPDT control relays with adjustable dead bands are provided along with a scalable 4-20 mA process output. In velocity of flow modes, a square root output is provided on the 4-20 mA signal to coincide with the actual flow curve. The Series DH provides extreme flexibility in power usage by allowing 120220 VAC and also 24 VDC power which is often used in control panels. Programming is easy using the menu key to access 5 simplified menus which provide access to: security level; selection of pressure, velocity or flow operation; selection of engineering units; K-factor for use with flow sensors; rectangular or circular duct for inputting area in flow applications; set point control or set point and alarm operation; alarm operation as a high, low or highlow alarm; automatic or manual alarm reset; alarm delay; view peak and valley process readings; digital damping for smoothing erratic process applications; scaling the 4-20 mA process output to fit your application's range; Modbus® communications; and field calibration. With all this packed into one product it is easy to see why the Digihelic® controller is the only instrument you will need for all your pressure applications.

18 DIN Digital Differential Pressure Control - Series B4 The Series B4 is a 18 DIN digital differential pressure controller for positive, negative, and differential pressure as well as velocity and flow. The patented Series B4 Differential Pressure Cotnroller includes (2) 8A SPDT relays, and an optional digitally scaleable 4-20 mA and 0-5 V output. The programmable control allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user friendly menu on the OLED display. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate user preferences. The Series B4 is easily mounted in a 18 DIN cut-out with a panel depth of only 2.1 inches (53 mm).

We have available following Ships spareparts for Sale: Product-Pressure Controller Product-Nakakita Seisakusho Type-NS-PS-732 Sr no-32K410 Date-23-3-82 If any requirement then please contact us on +91 97279 70078. 

The Electronic Pressure Controllers, which we deliver, have maximum working presure of 10Bar. Owing to our speedy distribution network, we are capable to render quickly and hassle free deliveries. For ensuring safety of the products during handling, warehousing and transportation, we make use of quality packing material. Moreover, the task of packaging is undertaken by the experts.

We are offering electronic pressure controller. * netel gas chromatograph model chrom lite gc-3000a with single flame lonization detector, with one packed or one splitsplit-less injection port. * electronic pressure controller (epc) provides excellent performance with capillary columns. *3 independent heated zones up to 400 c for individual control of injector, detector and oven. *higher sensitivity flame ionization detector requires no make up gas due to unique zero dead volume design. *32 keys for setting of the parameters & eight status l.e.d. Indications including oven ramp status. * pc control communication with rs. 232.

• Pressure ranges from vacuum to 3,000 psi (200 bar) • Precision model accuracy of 0.005%RD + 0.005%FS • Standard model accuracy of 0.02%FS • HART Communication and Profibus PA (only 780) • Control stability of 0.003%FS • Easy-to-use icon based user interface

Application:   Designed for automatic supply of water to one or more outletsFeatures and Benefits:   Pressure control for constant water pressure and dry running incase of no water in the pipe line. This controls pump operation, automatically and without interruption, with constant pressure and delivery during supply from one or more distribution points. If there is no water at the suction point it blocks the pump, without using level probes or float switches   Pressure control for constant water pressure and dry running incase of no water in the pipe line. This controls pump operation, automatically and without interruption, with constant pressure and delivery during supply from one or more distribution points. If there is no water at the suction point it blocks the pump, without using level probes or float switches

The ALANG Hub service maintenance department is augmented by our large inventory of marine spare parts.   ALANG Hub has a large client network across the world including India, U.S.A., Europe, Middle East, South East, UK, Saudi Arabia, Australia, Norway, Canada, Malaysia, Ukraine, South Africa, South America, UAE, New Zealand, Thailand, New York, Turkey, Russia, Singapore & Latin America. We are having satisfied client base from ship management companies, ship owners, ship repairs, ship suppliers & traders.

For requesting literature or any other information about Digital Temperature, Pressure Indicators / Controllers, please use our Enquiry Form. We will send the necessary information in a very short time.

Pressure Indicator : Accepts 4-20mA from pressure transmitter & displays pressure. Pressure Controller : Accepts 4-20mA from pressure transmitter, displays pressure and gives a relay o/p.   Specifications   4 3-1/2" Digit LED Display 4 I/P 4-20 mA 4 Works on 230V AC Mains 4 Generates 24V DC supply 4 Displays pressure upto 1000 bar 4 Single relay or Double relay o/p (Controller Only)  

Aerosense Differential Pressure Controller  It is recommended that industrialists dealing in the domain of pressure control & temperature drift should make the selection of the all new range of Aerosense Differential Pressure Controller. The device is a type of differential pressure indicator that comes with advanced & standard accessory items. It is also enabled with the zero point adjustment facility and high point adjustment (span) that is provided to deliver the excellent results as per the desired levels of quality in HVAC, fan & blower industries.Features: Better accuracy Highest pressure range

Product Details: Valve mounted, Compact and simple pressure control system Output air pressure upto 3 Kg/Cm2 hence valve positioner not required Can be used directly for pressure reduction or as overflow system. No additional instruments required Totally mechanical, very easy to maintain in-house No electronics, hence not affected by ambient temperature All materials includes sensing bellow are cast AL and SS hence corrosion resistant Can be used with any control valves with any Pneumatic Actuator Very little air consumption

Marsh Bellofram Type 3510 single and Type 3520 double loop electro-pneumatic servo pressure controllers combine the advantages of reliable solenoid valves and digital control, housed in a rugged, weatherproof enclosure. Available with a local keypad programming option or RS-485 digital communications for PLC or PC control, these precision controllers allow the user the ability to set and extract data directly from the transducer with a PC or automation system, making for some of the most precise, accurate, and reliable devices available on the market. With a forward flow of 1.25 SCFM at 100 psi, Types 3510 and 3520 can be used alone for many applications or combined with a volume booster for flows in excess of 2,000 SCFM. Various pressure output ranges are available from 29″ Hg vacuum to 600 psig. Standard accuracy is ±0.5% full scale or better. Enhanced accuracy version is ±0.25% full scale or better. A four-digit display of the output pressure is available with the keypad model.