Turing Machine Dealers

Features & Specs: A twin station concept – one station to bore and face the front end of the job, the other to bore and face the rear end of the job. Each station has 2 sets of compound slides with servo driven cross and longitudinal axes. One set of compound slide does facing while the other will be used to bore. Both the facing and boring slides will work simultaneously to reduce the cycle time. Slides made of male, heavy duty, extra rigid, case hardened guideway strips and female turcite lining. Many innovative design features for reducing the cost, without diluting the stock removal capabilities within the specified time. Sequence of operation: Manually load cast job onto left hand chuck & on the auto-cycle button. Job gets clamped automatically & head stock starts rotating Machining of the face & ID of the front end of the job takes place. While machining on LH station is going on, operator loads an ID machined job on RH station. On the auto-cycle button & rear side machining of the job takes place in the RH station. Cycle Time: Every 75 seconds, one rough turned component is achieved. Conclusion: The customer is now getting a rough turned component at the rate of 1 piece/75 seconds, compared to the earlier 1 piece/10 minutes. i.e. a cycle time reduction of 87.5% A comparatively less accurate, highly affordable, Stock Turning CNC SPM is expected to result in elimination of 8 high end, accurate, expensive CNC turning centers, which are hitherto used for rough turning operations. Reduction in man power – 8 CNC operators along with 8 turning centers are now available for more gainful work. Increased output. After rough turning in our machine, finish turning is carried out on CNC tuning centers, thereby cutting down the whole cycle time from 1 piece/12 minutes to 1 piece/3.25 minutes. i.e. a cycle time reduction of around 73%.

This is a process by which Raw MillCement Mill Trunnion Journals can be repaired by INSITU machining at site. The scorings formed over a period of time, can be removed and the Trunnion Journal diameter will be undersized to standard diametrical tolerances as per OEM's specification. The Trunnion Journal will be stationary while our INSITU attachment will rotate around to effect grinding. This will generate true spherical surface. Using this state of art INSITU machine, any shafts upto 3200mm diameter can be INSITU machinedground

The DL-MH series are 3 axis turning centers for turning and milling parts in a single setup. The machines are controlled by a FANUC Oi-TC system. For the DL-MH series, DMTG has developed a specially reinforced cylindrical one-piece base casting with a 45-degree slant bed design. This base design accommodates a much heavier loading leading to exceptionally high rigidity, good vibration absorption and great stiffness to ensure very high accuracy machining. The wide-range main spindle AC servo motor provides the machine with particularly high torque at low speed, and, together with a high resolution spindle pulse encoder and a hydraulic spindle brake ensures high accuracy indexing and milling during C axis work.