The following types of hobs are available: SPUR AND HELICAL GEAR HOBS PRE-SHAVING GEAR HOBS PRE-GRINDING GEAR HOBS STRAIGHT AND INVOLUTE SPLINE HOBS SERRATION HOBS SPROCKET HOBS WORM GEAR HOBS TIMING BELT HOBS SPECIAL HOBS BASIC PARAMETERS: Range:0.1 Module to 40 Module and 64 DP to 0.8 DP Start: Single or Multi Start Accuracy: AA, A, B & C (as per DIN 3968) Forms : Non-Topping, Semi-Topping, Topping, finishing, pre-shaving, pre- grinding, with or without protuberance, full fillet etc. Material : M-2,M35, ASP 30 etc.
The following types of hobs are available: SPUR AND HELICAL GEAR HOBS PRE-SHAVING GEAR HOBS PRE-GRINDING GEAR HOBS STRAIGHT AND INVOLUTE SPLINE HOBS SERRATION HOBS SPROCKET HOBS WORM GEAR HOBS TIMING BELT HOBS SPECIAL HOBS BASIC PARAMETERS: Range:0.1 Module to 40 Module and 64 DP to 0.8 DP Start: Single or Multi Start Accuracy: AA, A, B & C (as per DIN 3968) Forms : Non-Topping, Semi-Topping, Topping, finishing, pre-shaving, pre- grinding, with or without protuberance, full fillet etc. Material : M-2,M35, ASP 30 etc.
FeatureTangential, radial, topping or non-topping Hobs, Single or Multi Start and special reaming type.
Our company is a preeminent Manufacturer and Exporter of Spline & Worm Wheel Hobs. The Wheel Hobs we make available are designed for flank Forms ZN, ZA, ZL, ZK, ZC up to a lead angle of 45 degrees. We offer hollow type or integral shank type Hob depending on the strength constraints of the application.
Details : Tangential, radial, topping or non-topping Hobs, Single or Multi Start and special reaming type finishing hobs are also offered
Our company is a preeminent Manufacturer and Exporter of Spline & Worm Wheel Hobs. The Wheel Hobs we make available are designed for flank Forms ZN, ZA, ZL, ZK, ZC up to a lead angle of 45 degrees. We offer hollow type or integral shank type Hob depending on the strength constraints of the application.
Details : Tangential, radial, topping or non-topping Hobs, Single or Multi Start and special reaming type finishing hobs are also offered
Two tool (twin) generator blades are largely used in straight bevel gear generators in different industries. It is a planetary gear suitable for all types of machines in module ranging from 0.3 to 20. The generator blades are manufactured using m-2 m-35, which helps in making it durable and long lasting.
Straight bevel gear shaping generation cutter blades:
type I to iv suitable for all types of machines, are supplied in module range 1.0 to 25 mm
spare blades are produced for gleason machines, 24", 18", 12", 11â, 6" both roughing and finishing and also for heidenreich and harbeck machines.
Two tool (twin) generator blades are largely used in straight bevel gear generators in different industries. It is a planetary gear suitable for all types of machines in module ranging from 0.3 to 20. The generator blades are manufactured using m-2 m-35, which helps in making it durable and long lasting.
Straight bevel gear shaping generation cutter blades:
type I to iv suitable for all types of machines, are supplied in module range 1.0 to 25 mm
spare blades are produced for gleason machines, 24", 18", 12", 11â, 6" both roughing and finishing and also for heidenreich and harbeck machines.
Chain Sprocket Hobs are usually supplied in un ground form to cut roller chain sprockets to DIN, American standards with the range from 14 " to 3" pitch or 5 mm to 76.2 mm pitch. Multi start & ground from sprocket hobs can be had on request.
Chain Sprocket Hobs are usually supplied in un ground form to cut roller chain sprockets to DIN, American standards with the range from 14 " to 3" pitch or 5 mm to 76.2 mm pitch. Multi start & ground from sprocket hobs can be had on request.
ApplicationGenerating Parrallel or Angular Splines,Straight or Helical Splines with modifications like semi top
ConditionNew Good
Brand NameCTI
Country of OriginPatiyala
The company stands tall among the renowned Manufacturers and Exporters of Spline Hobs. The Hobs we make available are manufactured in compliance with set industrial norms. We offer Straight Sided/ Parallel Sided and Involute Spline Hobs. These are used for generating parallel or angular splines, straight or helical splines with profile modifications like semi topping, undercutting, shoulder clearance, etc. Buyers can obtain these at competitive rates.
Details :
Involute Spline Hobs as per DIN 5480, 5481 & 5482, NFE 22 141, ANSI B92.1
Spline Hobs for Power Take Off PTO Shafts according to DIN 9611
Parallel Spline Hobs with or without lugs, chamfer, semi-topping and shoulder clearance.
The company stands tall among the renowned Manufacturers and Exporters of Spline Hobs. The Hobs we make available are manufactured in compliance with set industrial norms. We offer Straight Sided/ Parallel Sided and Involute Spline Hobs. These are used for generating parallel or angular splines, straight or helical splines with profile modifications like semi topping, undercutting, shoulder clearance, etc. Buyers can obtain these at competitive rates.
Details :
Involute Spline Hobs as per DIN 5480, 5481 & 5482, NFE 22 141, ANSI B92.1
Spline Hobs for Power Take Off PTO Shafts according to DIN 9611
Parallel Spline Hobs with or without lugs, chamfer, semi-topping and shoulder clearance.
Material : Set industrial norms
Application : Generating Parrallel or Angular Splines,Straight or Helical Splines with modifications like semi top
CTI manufactures both standard and special Broaches in either push or pull styles, including all types of round broaches, Spline broaches, keyway broaches, internal hole, and surface broaches. Broaches are made to suit component specifications, customer's machine and holder details. Different internal profiles are undertaken for manufacture like: Splines - involute, parallel and trapezoidal, Serrations, Round, Hexagonal, Rectangular, Ratchet.
CTI manufactures both standard and special Broaches in either push or pull styles, including all types of round broaches, Spline broaches, keyway broaches, internal hole, and surface broaches. Broaches are made to suit component specifications, customer's machine and holder details. Different internal profiles are undertaken for manufacture like: Splines - involute, parallel and trapezoidal, Serrations, Round, Hexagonal, Rectangular, Ratchet.
Side and Face Cutters are supplied from dia 50 mm to 300 mm & width from 5 mm to 50 mm. As per ISS & B85 in M2 & M35 material.Others products includes slitting saws angle cutters.
Side and Face Cutters are supplied from dia 50 mm to 300 mm & width from 5 mm to 50 mm. As per ISS & B85 in M2 & M35 material.Others products includes slitting saws angle cutters.
Advanced transportation facilities, efficient workforce, on time delivery of the products make us stand out from the crowd. We are counted among distinguished suppliers of Side Cutter catering to buyers across diverse markets.
Advanced transportation facilities, efficient workforce, on time delivery of the products make us stand out from the crowd. We are counted among distinguished suppliers of Side Cutter catering to buyers across diverse markets.
Side and Face Cutters are supplied from dia 50 mm to 300 mm & width from 5 mm to 50 mm. As per ISS & B85 in M2 & M35 material.Others products includes slitting saws angle cutters.
Side and Face Cutters are supplied from dia 50 mm to 300 mm & width from 5 mm to 50 mm. As per ISS & B85 in M2 & M35 material.Others products includes slitting saws angle cutters.
MaterialHigh Speed Steel grade M35, M4, ASP 2030 and ASP 2052
ConditionGood
Number Of FlowerDisc Type,Deep Counter Bore,Hub Type,Shank Type
Country of OriginPatiyala
NameShaper Cutters
Module0.5 to 20 Module & DP -50 to 1.25 DP
AccuracyAA, A and B as per DIN 1829
CoatingsTiN,TiCN,TiAlN to enhance tool life up to 10 times.
Max. Diameter300 mm (12
We are a distinguished Manufacturer and Exporter of Shaper Cutters. The Cutters offered by us manufactured in adherence with set industrial norms. Our experts carry out various quality-tests on these before the final dispatch. Get in touch with us for bulk orders of these within the promised time frame.
Details :
CTI designs and manufactures spur and helical gear shaper cutters to produce all types of internal and external Gears, Splines, Sprockets and Timing Pulleys
Custom made shaping cutters to cut pre shaved and pre ground gears with profile modifications like protuberance and semi topping can be supplied
Shaper cutters can be supplied in following types :
Disc Type
Deep Counter Bore
Hub Type
Shank type
The above cutters are available in the following range of dimensions and specifications :
Module – 0.5 to 20 Module
DP- 50 to 1.25 DP
Max diameter -300mm ( 12” )
Accuracy : AA, A and B as per DIN 1829
Material : High Speed Steel grade M35, M4, ASP 2030 and ASP 2052
Coatings : TiN,TiCN,TiAlN to enhance tool life up to 10 times.
We are a distinguished Manufacturer and Exporter of Shaper Cutters. The Cutters offered by us manufactured in adherence with set industrial norms. Our experts carry out various quality-tests on these before the final dispatch. Get in touch with us for bulk orders of these within the promised time frame.
Details :
CTI designs and manufactures spur and helical gear shaper cutters to produce all types of internal and external Gears, Splines, Sprockets and Timing Pulleys
Custom made shaping cutters to cut pre shaved and pre ground gears with profile modifications like protuberance and semi topping can be supplied
Shaper cutters can be supplied in following types :
Disc Type
Deep Counter Bore
Hub Type
Shank type
The above cutters are available in the following range of dimensions and specifications :
Module – 0.5 to 20 Module
DP- 50 to 1.25 DP
Max diameter -300mm ( 12” )
Accuracy : AA, A and B as per DIN 1829
Material : High Speed Steel grade M35, M4, ASP 2030 and ASP 2052
Coatings : TiN,TiCN,TiAlN to enhance tool life up to 10 times.
Brand Name : CTI
Material : High Speed Steel grade M35, M4, ASP 2030 and ASP 2052
Condition : Good
Number Of Flower : Disc Type,Deep Counter Bore,Hub Type,Shank Type
ApplicationFor Shaping Involute Splines, Worms, Relief Machined Cutters For Sprockets
Product RangeModule Series, DP Series, CP Series
Shaper cutter, Gear Shaper Cutters CTI Designs and Produces ground Shaping cutters for involute splines, worms and relief machined cutters for sprocket. Product range includes Module series, DP series and CP series Shapers and different varieties of disc type, hub type and shank type shaper cutters.
Shaper cutter, Gear Shaper Cutters CTI Designs and Produces ground Shaping cutters for involute splines, worms and relief machined cutters for sprocket. Product range includes Module series, DP series and CP series Shapers and different varieties of disc type, hub type and shank type shaper cutters.
Number Of Flower : Gear Shaper Cutter
Material : Steel
Packaging Type : Metallic
Application : For Shaping Involute Splines, Worms, Relief Machined Cutters For Sprockets
Our company is an established Manufacturer and Exporter of Scalping Cutters. Our Cutters are manufactured from 6" diameter to 8" diameter and 16" to 20" in length. We offer Cutters for both light and heavy duty applications. Courtesy our brilliant logistics network, we are capable of delivering bulk orders of these within the allocated time.
Details :
The Cutters operate on horizontal or universal milling machines to machine large broad surfaces quickly
Cutters used in slab milling may have straight or helical teeth producing orthogonal or oblique cutting action
These are used for scalping copper & brass strips
Our company is an established Manufacturer and Exporter of Scalping Cutters. Our Cutters are manufactured from 6" diameter to 8" diameter and 16" to 20" in length. We offer Cutters for both light and heavy duty applications. Courtesy our brilliant logistics network, we are capable of delivering bulk orders of these within the allocated time.
Details :
The Cutters operate on horizontal or universal milling machines to machine large broad surfaces quickly
Cutters used in slab milling may have straight or helical teeth producing orthogonal or oblique cutting action
These are used for scalping copper & brass strips
MaterialImported High Speed Steel In M2 & M35 Grade
Length16
ApplicationScalping Copper & Brass Strips
Diameter6
DutyLight & Heavy Duty
Scalping and Cylindrical Cutters are manufactured from 6" dia to 8" dia & length from 16" to 20" in light & heavy duty.These are used for scalping copper & brass strips. Material used is imported high speed steel in M2 & M35 grade.
Scalping and Cylindrical Cutters are manufactured from 6" dia to 8" dia & length from 16" to 20" in light & heavy duty.These are used for scalping copper & brass strips. Material used is imported high speed steel in M2 & M35 grade.
Number Of Flower : Cutters
Material : Imported High Speed Steel In M2 & M35 Grade
CTI manufactures both standard and special Broaches in either push or pull styles, including all types of round broaches, Spline broaches, keyway broaches, internal hole, and surface broaches.
Broaches are made to suit component specifications, customer's machine and holder details.
CTI manufactures both standard and special Broaches in either push or pull styles, including all types of round broaches, Spline broaches, keyway broaches, internal hole, and surface broaches.
Broaches are made to suit component specifications, customer's machine and holder details.
Number Of Flower : Standard And Special Broaches
Material : Steel
Application : Suit Component Specifications, Customer\'s Machine, And Holder Details
Size0.5 Module to 36 Module & Equivalent DP's CP's
Number Of FlowerCutter
Country of OriginPatiyala
Cutter RangeSpurs,Pregrind Probtuerance,Involute Straight Sided Splines,Chain Sporockets,Serrations,Timing Belt
We are counted among the prominent Manufacturers and Exporters of Rack Type Cutters. The Cutters are manufactured using high grade HSS materials and advanced technology. We manufacture excellent quality Sunderland and MAAG Rack Type Cutters. Owing to our brilliant logistics network, we are capable of delivering bulk orders of these within the promised time frame. One can obtain these at affordable rates from us.
Details :
From 0.5 module to 36 module and equivalent DP’s Cp’s
Full range of Cutters including: Spurs, Pregrind Protuberance, Involute and
Straight sided Splines, Chain Sprockets, Serrations, Timing Belt Pulley Cutters
Double Helical Cutters up to 1DP (26 MOD)
Any non standard pitches or pressure angles � Special profiles calculated to customers requirements
We are counted among the prominent Manufacturers and Exporters of Rack Type Cutters. The Cutters are manufactured using high grade HSS materials and advanced technology. We manufacture excellent quality Sunderland and MAAG Rack Type Cutters. Owing to our brilliant logistics network, we are capable of delivering bulk orders of these within the promised time frame. One can obtain these at affordable rates from us.
Details :
From 0.5 module to 36 module and equivalent DP’s Cp’s
Full range of Cutters including: Spurs, Pregrind Protuberance, Involute and
Straight sided Splines, Chain Sprockets, Serrations, Timing Belt Pulley Cutters
Double Helical Cutters up to 1DP (26 MOD)
Any non standard pitches or pressure angles � Special profiles calculated to customers requirements
we also manufacture oerlikon blades, to cater to varied industrial needs. these are largely used for generating bevels and pinions for varied industrial purposes. our precision engineered oerlikon blades are also manufactured as per the requirements of the clients. they are available in the following sizes :
7.5 x 9 mm
13 x 10.5 mm
17 x 13.5 mm
material used
hss m-2
hss m-3
hss m-35
we also manufacture oerlikon blades, to cater to varied industrial needs. these are largely used for generating bevels and pinions for varied industrial purposes. our precision engineered oerlikon blades are also manufactured as per the requirements of the clients. they are available in the following sizes :
7.5 x 9 mm
13 x 10.5 mm
17 x 13.5 mm
material used
hss m-2
hss m-3
hss m-35
Suitable for wmw spiral bevel gear machines
manufacture in both with toprem and without toprem (l.h & r.h)
specification:
0.8 module â 10.0 module as per required sizes
inserted blade point width (pw) 0.38 â 4.6
nominal dia 75w, 106w, 150w, 212w, 300w (in sets)
v 75 mm dia, inner + outer cutter = 4 + 4 (08 blades)
v 106 mm dia, inner + outer cutter = 5 + 5 (10 blades)
v 150 mm dia, inner + outer cutter = 6 + 6 (12 blades)
v 212 mm dia, inner + outer cutter = 8 + 8 (16 blades)
v 300 mm dia, inner + outer cutter = 9 + 9 (18 blades).
Suitable for wmw spiral bevel gear machines
manufacture in both with toprem and without toprem (l.h & r.h)
specification:
0.8 module â 10.0 module as per required sizes
inserted blade point width (pw) 0.38 â 4.6
nominal dia 75w, 106w, 150w, 212w, 300w (in sets)
v 75 mm dia, inner + outer cutter = 4 + 4 (08 blades)
v 106 mm dia, inner + outer cutter = 5 + 5 (10 blades)
v 150 mm dia, inner + outer cutter = 6 + 6 (12 blades)
v 212 mm dia, inner + outer cutter = 8 + 8 (16 blades)
v 300 mm dia, inner + outer cutter = 9 + 9 (18 blades).
Set of blades - 5r 5l series suitable for spiral bevel gear for machine klingelnberg type amk 250, amk 400, amk 630, amk 635, knc40 & fk41b machines
material: hss aisi â m2, m35· 36.
Set of blades - 5r 5l series suitable for spiral bevel gear for machine klingelnberg type amk 250, amk 400, amk 630, amk 635, knc40 & fk41b machines
material: hss aisi â m2, m35· 36.
Involute Gear Cutters are supplied to cut any number of teeth in gears from 0.5 module to 50 module & 64 DP to 0.5 DP with maximum diameter of 360 mm. Conforming to BS 2518, IS 5698 in a set of numbers. Chain sprocket hobs are manufactured from 14" pitch to 3" pitch conforming to DIN, BS & as standards in a set of 3 Cutters to cut any no. of teeth in sprockets.
Involute Gear Cutters are supplied to cut any number of teeth in gears from 0.5 module to 50 module & 64 DP to 0.5 DP with maximum diameter of 360 mm. Conforming to BS 2518, IS 5698 in a set of numbers. Chain sprocket hobs are manufactured from 14" pitch to 3" pitch conforming to DIN, BS & as standards in a set of 3 Cutters to cut any no. of teeth in sprockets.
After - Sales Services ProvidedAvailable,Damaged Blades can also be replaced.
Brand NameCTI
Place Of originPatiyala
Inserted Blade Gear Hobs are manufactured in the range 20 to 32 module having blades of HSS (M-2 or M-35) materials and body made of carbon steel. After introducing these hobs it has become the best import substitute to save money & time. Damaged Blades can also be replaced.
Inserted Blade Gear Hobs are manufactured in the range 20 to 32 module having blades of HSS (M-2 or M-35) materials and body made of carbon steel. After introducing these hobs it has become the best import substitute to save money & time. Damaged Blades can also be replaced.
Involute Gear Cutters are supplied to cut any number of teeth in gears from 0.5 module to 50 module & 64 DP to 0.5 DP with maximum diameter of 360 mm. Conforming to BS 2518, IS 5698 in a set of numbers. Cutters having profile of particular no. of teeth and special milling cutters are also supplied. Chain sprocket hobs are manufactured from 1/4" pitch to 3" pitch conforming to DIN, BS & as standards in a set of 3 Cutters to cut any no. of teeth in sprockets.
Involute Gear Cutters are supplied to cut any number of teeth in gears from 0.5 module to 50 module & 64 DP to 0.5 DP with maximum diameter of 360 mm. Conforming to BS 2518, IS 5698 in a set of numbers. Cutters having profile of particular no. of teeth and special milling cutters are also supplied. Chain sprocket hobs are manufactured from 1/4" pitch to 3" pitch conforming to DIN, BS & as standards in a set of 3 Cutters to cut any no. of teeth in sprockets.
We are a successful Manufacturer and Exporter of Gear Shaving Cutters. We make available spur and helical Gear Shaving Cutters to produce all types of internal and external gears, splines, sprockets and timing pulleys. We maintain a large stock of the Cutters in our spacious warehouse, to meet the bulk and urgent requirements of the buyers.
Details :Custom made Shaving Cutters to cut pre shaved and pre ground gears with profile modifications like protuberance and semi topping can be suppliedShaper cutters can be supplied in following types :
Disc Type
Deep Counter Bore
Hub Type
Shank type
The above cutters are available in the following range of dimensions and specifications :
Module – 0.5 to 20 Module
DP- 50 to 1.25 DP
Max diameter -300mm ( 12” )
Accuracy : AA, A and B as per DIN 1829
Material : High Speed Steel grade M35, M4, ASP 2030 and ASP 2052
Coatings : TiN,TiCN,TiAlN to enhance tool life upto 10 times.
We are a successful Manufacturer and Exporter of Gear Shaving Cutters. We make available spur and helical Gear Shaving Cutters to produce all types of internal and external gears, splines, sprockets and timing pulleys. We maintain a large stock of the Cutters in our spacious warehouse, to meet the bulk and urgent requirements of the buyers.
Details :Custom made Shaving Cutters to cut pre shaved and pre ground gears with profile modifications like protuberance and semi topping can be suppliedShaper cutters can be supplied in following types :
Disc Type
Deep Counter Bore
Hub Type
Shank type
The above cutters are available in the following range of dimensions and specifications :
Module – 0.5 to 20 Module
DP- 50 to 1.25 DP
Max diameter -300mm ( 12” )
Accuracy : AA, A and B as per DIN 1829
Material : High Speed Steel grade M35, M4, ASP 2030 and ASP 2052
Coatings : TiN,TiCN,TiAlN to enhance tool life upto 10 times.
Brand Name : CTI
Material : High Speed Steel Grade M35,M4,ASP 2030 & ASP 2052
Diameter : -300 mm(12
Condition : Good
Coating : TIN,TICN,TIAIN to enchance tool life upto 10 times.
Reviews & Ratings
Write a Review
Post Free Ad
