ASHA ENTERPRISES Sadashiv Peth, Pune, Maharashtra

Brand Name : Vilter ( Frick India Ltd. )

Material : Graded Cast Iron 25 Graded Cast Iron 26 Sg Iron Aluminium Alloy MS Plates

Application : Air Compressor Use

Color : Silver

Finishing : Polished

CFIA filters are a range of angle-way and straight-way filters which are carefully designed to give favorable flow conditions. The design makes the filter easy to install and ensures quick filter inspection and cleaning, CFIA filters are used ahead of automatic controls, pumps, compressors, etc. for initial plant start-up and where permanent filtration of the refrigerant is required. The filter reduces the risk of undesirable system breakdowns and reduces wear and tear on plant components CFIA filters are equipped with a screen mesh of stainless steel, available in sizes 100, 150, 250 and 500p (microns), (US 150, 100,72,38 mesh").   Features : Applicable to all common refrigerants and all noncorrosiv gases/liquids Filter net of stainless steel mounted direct without extra gaskets means easy servicing CFIA filter housing compatible with housings belonging to other Castle products. A compatibility overview can be obtained from local Castle Sales Distributor Mesh is the number of threads per inch. (microns) is the distance between two threads (1=1/1000 mm). CFIA 50-200 (2-8 in) can be equipped with a magnetic insert for detention of iron particles and other magnetic particles. Each filter clearly marked with type, size and performance range. Housing and bonnet of low temperature steel. Temperature range-46°C +150°C. Pressure range: CFIA: 40 barg (580 psig).

Introduction :  Refrigerants : Applicable to all common non flammable refrigerants including R717 and non corrosive gases/liquids dependent on sealing material compatibility. Standard version : - 46/+150°C Pressure range : Range The valve are designed for max. working pressure 40 bar g (580 psig).   Features The valve Designed to open at a very low differential pressure of 0.04 bar (0.58 psig) Designed with a built-in damping chamber preventing valve flutter, due to low refrigerant velocity and low density Easy to disassemble for inspection and service Internal back seating enables replacement of the spindle seal whilst the valve is active in under pressure Optimal flow characteristics ensuring quick opening to the fully open position.   Housing : Made of special, cold resistant steel. Valve cone : The valve cone can be turned on the spindle, thus there will be no friction between the cone and the seat, when the valve is opened and closed. Spindle : Made of polished stainless steel so that PTFE and Graphite gaskets are not damaged. Sealing : Spindle sealing is done with PTFE and Graphite gaskets assuring 100% sealing.

Introduction Refrigerants : Shut off valves are applicable to all common non-flammable refrigerants including R717 and non-corrosive gases/liquids dependent on sealing material compability. For further information please see installation instruction for CSVA. These Shut off Valves are used in the Industrial Refrigeration system.   Temperature range Standard version : - 46/+150°C   Pressure range shut off valves are designed for max, working pressure CSVA-2 DN-15 to DN-40 : 25 bar (362 psig) CSVA-4 DN 15 to DN 200:40 bar (580 psig)   Features Housing : Made of special, cold resistant steel. Valve cone : Shut off valves cone can be turned on the spindle, thus there will be no friction between the cone and the seat, when the valve is opened and closed. Spindle : Made of polished stainless steel so that PTFE and Graphite gaskets are not damaged. Sealing : Spindle sealing is done with PTFE and Graphite gaskets assuring 100% sealing.   Design Housing : Made of special, cold resistant steel. Connections : Available with the following connections: - Butt-weld ANSI DN15-40(B 36.10 Schedule 80) Butt-weld ANSI DN 50(B 36.10 Schedule 40) Butt-weld ANSI Socket weld (ANSI B 16.11) - DN 15 - 40 % -1% in.). Spindle : Made of polished stainless steel so that PTFE and Graphite gaskets are not damaged. Sealing : Spindle sealing is done with PTFE and Graphite gaskets assuring 100% sealing.

Technical data Applicable for the refrigerants R717 (ammonia, Nh3), HFC, HCFC (e.g. R22, R134a, R404a) and other refrigerants dependent on sealing materials compatibility within a temperature range of -30°C/+100°C Flammable hydrocarbons are not recommended.    Pressure setting range : 10-25 bar (145-363 psig) the valve is designed for strength test : 40 bar (580psig). Leakage safety: Same as set pressure. For further information please contact your local Castle Sales Distributor.   Important : The CSRVA safety relief valve is dependent on the back pressure (if the back pressure is higher than the atmospheric pressure, the opening pressure will be higher than stated set pressure) Special circumstances such as vibrations (which should be avoided) and oscillating pressure may require an increased difference between the operational pressure and the closing pressure.   Pressure Setting : The operating pressure of the plant should be at least 15% below the set pressure. This allows a perfect re-seating of the safety relief valve after having been activated. .   Temperature Range : -30/+100°C.

Power Source : Electric Motor

Material : Aluminium

Color : White

CREG is angle-way and straight-way regulating valves, which act as normal stop valves in the closed position. Regulating valves are designed to meet the strict quality requirements on refrigerating installations and are carefully designed to present favorable flow conditions and accurate linear characteristics CREG is equipped with internal back seating enabling the spindle seal to be replaced with the valve still under pressure.   Features : Applicable to all common non flammable refrigerants including R 717 and non corrosive gases/liquids dependent to sealing material compatibility. Designed to ensure perfect regulation. Internal backseating enables replacement of the spindle seal whilst the valve is active, i.e. under pressure. Easy to disassemble for inspection and possible repair. Max. operating pressure: CREG: 25 bar g (362 psig) Full temperature range packing gland - 46/+150°C.

Thickness : 10-20mm, 20-30mm, 40-50mm

Inner Diameter : 30mm

Shape : Round

Finishing : Galvanized

Material : Mild Steel

Material : Cast Iron

Brand Name : Grasso York Kirloskar Bitzer Vilter Etc.

Introduction Refrigerants : Applicable to HCFC, HFC, R717(Ammonia) and R744 (CO2). For further information please see installation information for COFV. Standard version : - 46/+150°C Pressure range : The valves are designed for max, working pressure 40 bar g(580 psig)   Features Three functions in one valve. The OFV valve combines the functions of an overflow valve, a check valve and a stop valve COFV are angle-way overflow valves, which have adjustable opening pressure and cover the differential pressure range 2-8 bar (29-116 psi). The valve can be closed manually, during plant service and have back seating, enabling the spindle seal to be replaced with the valve still under pressure. The valves are specially designed to prevent fluttering due to low velocity In consequence it is possible to apply the valves with wide fluctuations in capacity demands and maximum performance to part load. A flexible O-ring provides perfect sealing over the seat.   Installation The valve is designed to resist very high internal pressure, but as to the pipe system in general, hydraulic pressure caused by thermal expansions in entrapped refrigerants should be avoided.

Brand Name : McQuay

Type : Reciprocating

Brand Name : Kirloskar Pneumatic Co. Ltd.

Material : SS, Aluminium

Power Source : Electric Motor

Highlights : Applicable to R717(Ammonia), R744(CO2), HCFC and HFC. Also utilized in chemical and petrochemical applications. Quick and simple valve maintenance. It requires less effort to replace the top part and no welding is required. Designed to operate at very low differential pressure of 0.58 psi g(0.04bar). Modular Concept: Each valve body is available with a number of different sizes and connection types. Possible to transform/convert MSCA-S and MCHV into any other product of MSVL family (stop valve, regulating valve and strainer) by replacing the entire top part. Each valve type is clearly mentioned with type, size and operating range. Designed with an integrated damping chamber preventing valve flutter in case of low refrigerant velocity and/or low density. Quite easy to disassemble for inspection and maintenance. Damping facility provide protection against pulsation. Internal backseating enables the replacement of the packing gland (spindle seal) while MSCA valve is in working condition. Optimal flow characteristics ensure quick opening to the fully open condition. Valve body and bonnet material is low temperature steel as per PED norms. Maximum working pressure: - 754 psi g (52 bar g). Operating temperature range: - 60 to +150°C (– 76 to 302°F).

Application : Refrigeration Compressor

Material : Casting Fabricated

Brand Name : Grasso Gea

Highlights : Applicable to R717(Ammonia), R744(CO2), HCFC and HFC. Also utilized in chemical and petrochemical applications. Quick and simple valve maintenance. It requires less effort to replace the top part and no welding is required. Designed to operate at very low differential pressure of 0.58 psi g(0.04bar). Modular Concept: Each valve body is available with a number of different sizes and connection types. Possible to transform/convert MSCA-S and MCHV into any other product of MSVL family (stop valve, regulating valve and strainer) by replacing the entire top part. Each Ammonia Stop valves type is clearly mentioned with type, size and operating range. Designed with an integrated damping chamber preventing valve flutter in case of low refrigerant velocity and/or low density. Quite easy to disassemble for inspection and maintenance. Damping facility provide protection against pulsation. Internal backseating enables the replacement of the packing gland (spindle seal) while MSCA valve is in working condition. Optimal flow characteristics ensure quick opening to the fully open condition. Valve body and bonnet material is low temperature steel as per PED norms. Maximum working pressure: - 754 psi g (52 bar g). Operating temperature range: - 60 to +150°C (– 76 to 302°F).

Material : Graded Cast Iron 25 & 26 , EN8D

Application : Refrigeration Compressor

Brand Name : Copeland Compressor spare parts

Usage : Textile Industry

Size (Inches) : 15-20 Inches

Finishing : Polished

Warranty : 2 Year

Material : Graded Cast Iron 25 & 26