Digital IO Modules Dealers

(4 products available)
  • Premium
    Wireless Io Extender

    Wireless Io Extender

    34,000 / piece

    • MOQ1 piece
    • Frequency50Hz
    • Country of OriginIndia
    • Input Supply Voltage85-265 VAC / 24VDC (Factory Settable)
    • Operating Temperature-20°C to 85°C
    • Frequency RangeISM Band 433-434 MHz
    • AntennaRubber Duck Antenna
    • Mounting TypeWall / Din Rail
    • SafetyRF COM Loss Output , Auto Channel Switching, DC Reverse Polarity
    • Packaging TypeBox
    • UsageExtending Wireless Network Coverage
    • Power SourceElectric Outlet
    ...more
    www
  • Energy Measurement Module

    Energy Measurement Module

    Get Price Quote

    • Power :+10 to +30 VDC
    • Communication Port :2 wire RS485
    •  Number of inputs
    • 4Rated Input Voltage
    • 24 VDC (Max : 28 VDC)Input Impedance
    • 5.6 kWRated Input Current
    • 4 mALogic ‘0’ Voltage 
    • 0 to 5 VDCLogic ‘1’ Voltage
    • 12 to 28 VDC 
    • Number of Inputs3 phase alternating current and voltage input
    •  Single Phase Voltage
    • +/-3.45V  ( i.e. 1.5 % of rated voltage 230 V )Current
    • +/- 2 % of Full Scale 5A * CT ratio.  Active Power
    • +/- 2 % of Full Scale  ( 230V * 5A * CT ratio )Measurable Frequency range
    • 40Hz to 70Hz 
    • Number of Outputs4 (NPN Transistor)
    • Maximum Load current500 mA
    • Voltage drop during Power ON0.4 V or less
    •  Operating
    • 0° to 60° CStorage
    • -20° to 80° CHumidity
    • 10% to 90% (Non condensing)Mounting
    • DIN rail mountingSize
    • 100 W x 70 H x 35 D mmImmunity to ESD
    • Level 3 as per IEC1000-4-2Immunity to Transients
    • Level 3 as per IEC1000-4-4Immunity to Radiated RF
    • Level 3 as per IEC1000-4-3Immunity to Conducted RF
    • Level 3 as per IEC1000-4-6Emissions
    •  Features Low cost compact 3 phase Energy measurement module 3 phase voltage input up to 300 Vrms (Line-Neutral) and current input up to 5 A can be measured Measures Voltage, Current, Frequency, Active Power, Reactive Power, True Power, Average Power and Power Factor Facility for 4 bi-directional digital inputs and 4 digital NPN outputs (open collector) High Speed Modbus RTU (Slave) communication 2 wire RS-485 Communication port (isolated) on pluggable terminal block User definable Address, Baud rate and Parity through convenient DIP Switches LED indication for each Input and Output, COM port and Power ON No configuration software required FunctionFIOD-EN-0404-C measures 3 phase Energy and adds digital capability to a PLC / SCADA system.The module has 3 phase isolated Voltage and Current inputs . It also has 4 digital inputs and 4 digital outputs that can be read and controlled by the Modbus master. The digital inputs and outputs are isolated from the host device. The module has one RS485 (2 wire) communication port to connect to the host device. Communication settings like baud rate, parity and station ID can be set by DIP switches. Communication with HostThe module supports Modbus RTU (Slave) Protocol. It communicates with the Host through 2 wire RS 485 Network. In case of communication failure with Host, the user can configure watchdog time-out and failure mode for the outputs.
    ...more
  • Digital Io Module +2

    Digital Io Module

    10,500 / Piece

    • MOQ10 Piece
    • Country of OriginIndia
    • Frequency50 Hz
    • Number Of Ports/Pins4 Pins
    • MaterialABS
    • Dimensions115mm x 90mm x 40mm
    • Input voltage24 V DC
    • Number of Channel8
    • Resolution16 Bit
    • PhaseSingle Phase
    • Humidity95%
    • Operating Temperature-40 to 70 Degree C
    • Isolation3000 Vrms
    ...more
  • Extension Unit

    Extension Unit

    Get Price Quote

    • Number Of FlowerK2HNV-XS
    • Safety Contacts3
    • Safety Leveldepending on main relay
    • Power Supply Voltage24 V AC/DC
Filter by Locality
top