E.g.kantawalla Pvt. Ltd. Kharadi, Pune, Maharashtra

Aqua waterproof scales can be housed or immersed in water. ABS construction with smooth surfaces ensures no possibility of food particles sticking on the surface hence no bacteria formation. Additional features of built in Battery backup, Bright LED Display, Sealed Keypad and adjustable feet. Features 100% Tare range 14.2 mm High Super Bright LED Display HI/OK/LOW Check Weighing Function available Multiple Weighing Speed Auto Power off Function form 1 to 99 minutes Auto sleep Function is available to save battery life Built-In Rechargeable Battery Backup for 100 hours of continuous use Easy Access to remove Battery Low Battery Indication Weight Stabilization Indication Fast and Stable Weighing Response Sealed Circuit Board for Protection against water Aircraft grade high tensile aluminum load cell IP68 Waterproof Design Simple user-friendly operation Anti-slip adjustable leveling feet Colour coded and sealed keypad Large stainless steel pan (SS 304) Overload protection Built-In Rear display AC Adaptor Range ModelCapacityReadability Aqua 03 03 kg 200 mg Aqua 06 06 kg 500 mg Aqua 15 15 kg 1 g Aqua 30 30 kg 2 g Specifications General Specifications Particulars Stabilization time

EAGLE ETSB Series Closed Orthotropic-Rib are designed for extended long life. The orthotropic beams are arc welded in a continuous seam – to provide exceptional strength and torsional rigidity. Higher-Strength modules results in increase CLC Concentrated Load Capacity of single axel weight from 18t to 25t and tandem axle weight from 28t to 40t. The Low Profile design requires less approach space and lower incline angle for approach ramps. In most competitive designs, intermittent welds are located in high stress areas. The constant bending under heavy loads and the small amount of weld material can cause the welds to crack, resulting in premature deck failure. Using continuous welds located away from high-stress areas eliminates one of the most common causes of truck failures. EAGLE's orthotropic design provides a weigh bridge that will give you years of trouble-free weighing even in the harshest environments and toughest applications. EAGLE ETSB Series Weigh Bridges are Model Approved by The Legal Metrology Department Of India vide approval number IND/09/2001/260. Range ModelCapacityReadabilityPlatform Size ETSB 0205-06 S 20000 kg 5 kg 6 x 3 Meters ETSB 0305-06 S 30000 kg 5 kg 6 x 3 Meters ETSB 0205-07 S 20000 kg 5 kg 7 x 3 Meters ETSB 0305-07 S 30000 kg 5 kg 7 x 3 Meters ETSB 0410-07 S 40000 kg 10 kg 7 x 3 Meters ETSB 0510-07 S 50000 kg 10 kg 7 x 3 Meters ETSB 0610-07 S 60000 kg 10 kg 7 x 3 Meters ETSB 0305-07X S 30000 kg 5 kg 7.5 x 3 Meters ETSB 0410-07X S 40000 kg 10 kg 7.5 x 3 Meters ETSB 0510-07X S 50000 kg 10 kg 7.5 x 3 Meters ETSB 0610-07X S 60000 kg 10 kg 7.5 x 3 Meters ETSB 0305-09 S 30000 kg 5 kg 9 x 3 Meters ETSB 0410-09 S 40000 kg 10 kg 9 x 3 Meters ETSB 0510-09 S 50000 kg 10 kg 9 x 3 Meters ETSB 0610-09 S 60000 kg 10 kg 9 x 3 Meters ETSB 0410-12 S 40000 kg 10 kg 12 x 3 Meters ETSB 0510-12 S 50000 kg 10 kg 12 x 3 Meters ETSB 0610-12 S 60000 kg 10 kg 12 x 3 Meters ETSB 0410-14 S 40000 kg 10 kg 14 x 3 Meters ETSB 0510-14 S 50000 kg 10 kg 14 x 3 Meters ETSB 0610-14 S 60000 kg 10 kg 14 x 3 Meters ETSB 0410-15 S 40000 kg 10 kg 15 x 3 Meters ETSB 0510-15 S 50000 kg 10 kg 15 x 3 Meters ETSB 0610-15 S 60000 kg 10 kg 15 x 3 Meters ETSB 0820-15 S 80000 kg 20 kg 15 x 3 Meters ETSB 1020-15 S 100000 kg 10 kg 15 x 3 Meters ETSB 0510-16 S 50000 kg 10 kg 16 x 3 Meters ETSB 0610-16 S 60000 kg 10 kg 16 x 3 Meters ETSB 0820-16 S 80000 kg 20 kg 16 x 3 Meters ETSB 1020-16 S 100000 kg 20 kg 16 x 3 Meters ETSB 1220-16 S 120000 kg 20 kg 16 x 3 Meters ETSB 0510-18 S 50000 kg 10 kg 18 x 3 Meters ETSB 0610-18 S 60000 kg 10 kg 18 x 3 Meters ETSB 0820-18 S 80000 kg 20 kg 18 x 3 Meters ETSB 1020-18 S 100000 kg 20 kg 18 x 3 Meters ETSB 1220-18 S 120000 kg 20 kg 18 x 3 Meters Features Proven Orthotropic Bridge Design. Low Profile Design requires shorter approach ramps. Available in Both Pit and Pit-less models. Long lasting compared to conventional I beam architecture. Modular Design Enables quick and easy installation, transportation and if required future platform extension. Structure designed to withstand higher CLC of up to 40 t for tandem axels. Fabricated using High Tensile Steel Easy To Clean And Maintain. Non Slip Driving Surface. Options Easy To Install Side Rails. Steel Approach Ramps Available.

Liquids, powders, solids, and gases are captured, stored, and processed in many different types of vessels, tanks, hoppers, and unique containers. Whether managing inventory, ensuring product consistency, or eliminating waste, there are numerous requirements for integrating weighing into these structures. We have solutions for all your needs. Features 25 mm LCD display with backlight Built-In Battery Backup for standalone operation upto 72 hours. Low battery warning. Auto sleep/power down function to save battery life. Stabilization indication. Backlight setting function. Colour coded and sealed keypad. Simple user-friendly operation. Alloy Steel Argon welded Load cell – confirms to IP 67. Sealed Stainless Steel junction box. Rugged top and bottom mounting plates with lift Jacks. Steel encapsulated interface cable suitable to withstand hostile environment.   Built-in RS232 serial interface. Technology Assisted From Applied Weighing – United Kingdom. Range ModelCapacityReadabilityType ELP – 003 TK3 300 kg 100 g 3 Leg ELP – 003 TK4 300 kg 100 g 4 Leg ELP – 006 TK3 600 kg 100 g 3 Leg ELP – 006 TK4 600 kg 100 g 4 Leg ELP – 015 TK3 1500 kg 500 g 3 Leg ELP – 015 TK4 1500 kg 500 g 4 Leg ELP – 030 TK3 3000 kg 1 kg 3 Leg ELP – 030 TK4 3000 kg 1 kg 4 Leg ELP – 060 TK3 6000 kg 2 kg 3 Leg ELP – 060 TK4 6000 kg 2 kg 4 Leg ELP – 100 TK3 10000 kg 5 kg 3 Leg ELP – 100 TK4 10000 kg 5 kg 4 Leg Specifications General Specifications Particulars Operating temperature 0°C to 50°C Operating humidity 95% RH Max. (Non-condensing) Technical Specifications Particulars Internal Resolution 20,00,000 AC Power Supply 100~250V DC Power Supply 6V Frequency 50~60HZ Power Consumption 10 Watts Approx Options 4 to 20mA Current Loop or 10VDC output for connection to PLC Dual Set Point With Relay Output RTC (Real Time Clock) For Printing Date And Time Of Weighment Wall Mounting 12.5 mm Red LED Remote with 6 meters Cable Wall Mounting 24.4 mm Red Serial L.E. D. Remote with 10 Meters Cable Wall Mounting 75 mm Red Serial L.E. D. Remote with 10 Meters Cable Flameproof Indicator with Zener Barrier and armored cable (4 Key Function) Flameproof Indicator with Zener Barrier and armored cable (8 Key Function)

Individual E1, E2, F1, F2 and M1 OIML class weights. The special steel knob weights are highly polished, corrosion-resistant and available from 1 g to 50 kg. They are non-magnetisable and have a density of 8.0 gcm3. Packaged in a plastic case (up to 20 g) or aalluminiumcase (from 50 g) the knob weights are comfortably stored. Save time and cost with regular verification. This unique approach means you can rely on accurate measuring results. Cultivate the Accurate Weighing Habit.

Waterproof Scales are designed for use in wet areas, but there are various levels of "waterproofing" available. The international IP standard for sealing integrity lists IP65 as capable of withstanding low pressure water jets from any angle with limited ingress. The T – WP Series features Super Bright LED Display, Built In Battery Back Up with Auto Sleep Function and is legal for trade scale in capacities from 6 kg to 30 kg. Features 12.5 mm High Super Bright LED Display Built-In Battery Backup with 48 hours operation Counting Function Built-In rear display AC Adaptor Simple user-friendly operation Zero Tracking Anti-slip adjustable leveling feet Colour coded and sealed keypad Precision load cell technology Large stainless steel pan Overload protection Range ModelCapacityReadability T 15 – WP 15 kg 2 g T 30 – WP 30 kg 5 g Specifications General Specifications Particulars Stabilization time 3 seconds Operating temperature 0°C - 50°C Overall dimensions(w x d x h) 280 x 320 x 150 mm (Approx) Operating Humidity 95 % RH Max.(Non-condensing) Net weight 3.74 kg Pan size 215 x 265 mm Technical Specifications Particulars Model T 15 – WP T 30 – WP Capacity 15 kg 30 kg Readability 2 g 5 g Internal Resolution 20,00,000 AC power source 100~230 V Frequency 50~60 HZ DC power source 6V Display 7 Segment, 5 Digit LED display Power Consumption 10 Watts Approx. Options Remote Display RS-232 Serial Port

Ideal for food preparation, food processing plants, agricultural facilities, and more, H2O scales feature IP66 rated wash down housing and a large stainless steel weighing pan. Indicators for Under, Ok, and Over limits make check weighing fast and easy, and a brilliant backlit LCD with capacity tracker, indicators for overloads, low battery, and auto power-off, make the H2O very user friendly. They operate with an AC adaptor or rechargeable battery pack for portability; both are included.     Features 100 % Tare range LCD display with moon backlight Check weighing mode HI/LO/OK and status indication Weight Accumulation Function Backlight Setting Function Stabilization indication 50 unit weight memories for the counting Function 20 Target weight memories, numerically and definable 20 numeric tares memory Simple user-friendly operation Colour coded and sealed keypad Anti-slip adjustable leveling feet Precision load cell technology Protection class - IP 66 Built-In battery backup with 100 hours operation Auto sleep / power down function to save battery life RS-232 interfaces ( for connect to PC and printer) Overload Protection     Range ModelCapacityReadability H2O 03 03 kg 0.5 g H2O 06 06 kg 1 g H2O 15 15 kg 2 g H2O 30 30 kg 5 g     Specifications General Specifications Particulars Stabilization time

It is so complete that we call it "The Most User Friendly Balance". Colour coded and sealed keypad, a large super bright 12.5 mm high LED display and applications for parts counting. It improves response, speed, accuracy and minimizes maintenance costs. An economical choice for your basic weighing needs.     Features 12.5 mm High Super Bright LED Display Built-In Battery Backup 48 hours operation Built-In Rear display AC adaptor Modern low profile design Counting Function Check Weighing Function External calibration AC adaptor Simple user-friendly operation Zero Tracking Anti-slip adjustable leveling feet Colour coded and sealed keypad Precision load cell technology Large stainless steel pan Overload protection     Range ModelCapacityReadability ECO 06 600 g 100 mg ECO 15 1500 g 200 mg ECO 30 3000 g 500 mg     Specifications General Specifications Particulars Stabilization Time 3 Seconds Operating Temperature 0°C - 50°C Operating Humidity 95 % RH Max.(Non-condensing) Overall Dimensions (L×W×H) 240 x 180 x 80 mm Net weight 1.4 kg Pan Size 140 x 125 mm Technical Specifications Particulars Model ECO 06 ECO 15 ECO 30 Capacity 600 g 1500 g 3000 g Readability 100 mg 200 mg 500 mg Internal Resolution 20,00,000 Repeatability(S.D) 2 Counts Linearity(±) 2 Counts AC Power supply 100~250V DC Power supply 4V Frequency 50~60HZ Power Consumption 10 Watts Approx   Options Table Top Remote L.E.D Display with 3 meter cable Printer or RS-232 serial Port for data transmission of displayed weight

20,00,000 Internal Resolution Full Digital Calibration 12.5 mm Super Bright Reverse LCD Display Separate Tare Display 55 Key Operation (6000 PLU Storage) Built-in USB Port For Data Transfer. Built-in RS Ethernet and 232 Serial Port Built-in Thermal Printer (50 mm Print Area.) PC Software For Upload and Download Of Data.

APC Series has been designed to offer optimum quality for the price in order to guarantee the operating speed, robustness, and accuracy that is needed in all retail environments. The Soft-Touch colour coded and sealed keypad, large and easy to read Super Bright LED and the integrated built in battery backup offer you a complete package of features seldom seen on an entry level price-computing scale – ensuring that it stands out. Features 12.5 mm Super Bright LED Display Three separate display for unit price, weight and Total Price 7 Memory Locations To Fast Moving Items. Built-In Battery Backup with 48 hours operation Built-In Rear Display Stabilization indication AC Adapter Simple user-friendly operation Zero Tracking Anti-slip adjustable leveling feet Colour coded and sealed keypad Precision load cell technology Large stainless steel pan Overload protection Range ModelCapacityReadability APC 15 15 kg 2 g APC 15 D 7.5/15 kg 1/2 g APC 30 30 kg 5 g APC 30 D 15/30 kg 2/5 g Specifications General Specifications Particulars Operating temperature 10°C - 50°C Overall dimensions (w x d x h) 333 × 365 × 115 mm Net weight 3.6 kg Operating humidity 95% RH Max. (Non-condensing) Weight display 7 segment, 6 digits with decimal point Pan Size 230 × 330 mm Technical Specifications Particulars Model APC 15 APC 15 D APC 30 APC 30 D Capacity 15 kg 7.5/15 kg 30 kg 15/30 kg Readability 2 g 1/2 g 5 g 2/5 g Internal Resolution 20,00,000 Power Source 100~230V DC Power Source 6V Frequency 50~60Hz Power consumption Less than 10 watts Overload alarm Max +9d Options Single side pole display for APC Price computing scale Double side pole display for APC Price computing scale

The HZQ Series balances are easy to use and highly accurate. They feature 14 multiple weighing units, RS-232 interfaces, AC operation, adjustable feet, level bubble and more. The HZQ Provides rapid weighing response coupled with high precision measurement. Colour coded and sealed keypad, a large 25.4 mm high LCD displaywith moon backlight and applications for parts counting make it delightful to work with. Quickly zero the balance or toggle through available weighing units with a quick press of a button. This scale is a true master in its class.   Standard Features Tare Function Counting Function Zero Tracking % Weighing Function Accumulation Function based on Weight & Quantity (Count) 14 Weighing Units Auto Sleep Function To Save Battery Unit Weigh Storage Facility In-Built Battery Charger* Low Battery Indication Weight Stable Indication Over-Load Protection Key Board : 5 Tactile Keys Colour Coded Key Board Battery Back-up : 48 Hours - Battery Fully Charged Range HSN Code: 8423 8100 ModelPlatform SizeCapacity x AccuracyMOC Housing / MOC Pan EHP – 230 290 x 210 mm 10 kg x 100 mg ABS Plastic / Stainless Steel 304 EHP – 230 290 x 210 mm 20 kg x 100 mg ABS Plastic / Stainless Steel 304 EHP – 230 290 x 210 mm 30 kg x 100 mg ABS Plastic / Stainless Steel 304   Technical Specifications Model EHP - 230 Description Digital High Precision Weighing Scale Physical Dimension 320 x 320 x 120 mm (±5 mm) Net Weight Approx 3.0 Kg (Without Battery) Weight Sensor Precision Aluminum Load Cell – IP65 Processor 8 Bit Microprocessor Key Board 5 Tactile Keys Display Type LCD with Symbols & Moon Backlight No. Of Display Window Single Display Display Size 25 mm - Front Display Repeatability ±1d Linearity ± 1d At Half Load & ± 2d At Full Load Creep ± 2d (for 3 minutes at full capacity) Calibration Method External Physical Calibration Software Based Power Connector DC Adapter 12V/500mA Power Supply 170 V to 250 V (AC) Frequency 50~60 Hz Power Consumption < 10 Watt Operating Temperature 5°C to 50°C Operating Humidity 95% RH Max (Non–Condensing) Battery Capacity 6V / 4.5 AH Over-load 100% Of Scale Capacity +9e Safe-load 150% Of Scale Capacity Stabalisation Time < 2s Internal Resolution 20,00,000+ Counts   Factory Options Opt 012 - RS – 232 Interface With PC Opt 117 - Weighment With Under Hook

Econ Series SILVER Balance has been the customer favorite for over a decade. Econ Series SILVER Scale is best suited for precision weighing with easy to view 20 mm Super Bright Green LED with applications for parts counting, accumulation function, auto tare for packaging industries etc. Equipped with precision load cell which ensures the user of the repeatability and accuracy over long period of time. It has built in battery back-up, anti-slip adjustable leveling feet with level bubble. ECON series Silver Scale offers uncomplicated performance that returns the investment many times over.   Standard Features Tare Function Counting Function Accumulation Function Liter Conversion Function Auto Tare Function Peak Hold Fuction Inbuilt Battery Charger* Low Battery Charger Battery % Function Weight Stable Indication 5 Keys Colour Coded Key Board Battery Back-up: 6V / 4.5 AH - 10 Hours+ When Battery is Fully Charged Anti-Slip Adjustable Levelling Feet Zero Tracking Over Load Protection & Indication Auto Sleep / Power Down Function - 0 to 99 Mins *Note: Battery will not be supplied with the scale   Range ModelCapacityAccuracy SILVER - 210 3 kg 100 mg SILVER - 210 6 kg 200 mg SILVER - 210 15 kg 500 mg SILVER - 210 30 kg 1 g HSN Code: 84 23 81 00 Resolution: 1/30000 Platform Size: 315 x 220mm MOC Housing: ABS Plastic MOC Pan: Stainless Steel 304   Technical Specifications Physical Dimension 340 x 320 x 110 mm (±5 mm) Net Weight 3 kg. Approx. Weight Sensor Aluminum Load Cell - IP65 Processor 32 Bit Arm Processor Key Board 5 Keys Display Type LCD (Green) Display No. of Display Window Dual Display Display Size 20 mm - Front Display & 14 mm Back Display Platter Size 315 x 220 mm Repeatability ± 1d Linearity ± 1d At Half Load & ± 2d At Full Load Creep ± 2d (for 3 Minutes with Full capacity) Calibration Method External Calibration Software Based Power Connector 2 Pin Mains Cord (5A) Power Supply 150 V to 230 V (AC) Frequency 50 - 60 Hz Power Consumption < 5 Watts Operating Temperature 0°C to 45°C Operating Humidity 95% RH Max (Non - Condensing) Battery Capacity 6V / 4.5 AH Over-load 100 % Of Scale Capacity +9e Safe-load 150 % Of Scale Capacity Stabalisation Time < 4s Internal Resolution 24 Bit ADC (10,48,576 Counts)   Factory Options Opt 012 - RS - 232 For Connection With PC.

ECON Jewel Series Balance is designed with high quality housing to guard against shock and overload to protect the load cell, with easy to view high contrast LCD display with moon backlight. Its unique draft shield eliminates wind disturbances outdoors or in drafty environments. With multiple units of weight to choose from it pays to invest in ECON Jewel Series Balance as it delivers accurate, trustworthy and repeatable results - GOOD FOR YOUR BUSINESS AND PEACE FOR YOUR MIND.     Standard Features Tare Function. Counting Function. Paper Thickness Measurement - GSM UNIT. Battery Level Indication. Inbuilt Battery Charger*. Weight Stable Indication. Over Load Indication. Foldable Shield for Wind Protection. External Calibration Software Based - Single Key Procedure 4 Keys Colour Coded Key Board. Battery Back-up: 6V / 1.3 AH - 24 Hours+ When Battery is Fully Charged. 14 Weighing Units. Test Weight for Calibration. Anti-Slip Adjustable Levelling Feet. Zero Tracking. *Note: Battery will not be supplied with the scale     Range ModelCapacityAccuracyResolution Jewel 110 620 g 10 mg 1/62000 Jewel 110 1200 g 10 mg 1/120000 Jewel 120 620 g 10 mg 1/62000 Jewel 120 1200 g 10 mg 1/120000 HSN Code: 90 16 00 00 Platform Size: 130 mm Ø MOC Housing: ABS Plastic MOC Pan: Stainless Steel 304     Technical Specifications Physical Dimension 265 x 187 x 168 mm (±5 mm) Net Weight JEWEL 110 - 1.3 kg. Approx. (Without Battery)   JEWEL 120 - 1.5 kg. Approx. (Without Battery) Weight Sensor Precision Aluminum Load Cell - IP65 Processor 8 Bit Micro Controller Key Board 4 Keys Display Type LCD with Symbols With Moon Back Light No. of Display Window 110 - Front + Back Display   120 - Front + Remote Display Display Size 20 mm - Front Display   12.5 mm - Back or Remote Display in case of Jewel 120 Platter Size 130 mm Diameter Repeatability ± 1d Linearity ± 1d At Half Load & ± 2d At Full Load Creep ± 2d (after 3 Mins on Full Load of Scale) Calibration Method External Calibration Software Based - Single Key Power Connector 9 V DC Adaptor Power Supply 160 V to 230 V (AC) Frequency 50 Hz Power Consumption Less than 5 Watt Operating Temperature 0°C to 40°C Operating Humidity 95% RH Max (Non - Condensing) Battery Capacity 6V / 1.3 AH Over-load 100 % Of Scale Capacity +9e Safe-load 150 % Of Scale Capacity Stabalisation Time < 4s Internal Resolution 20 Bit ADC (10,48,576 Counts)

This top of the line precision balances has been known for delivering accurate weighing results over and over again. A large 30 mm high LCD display with backlight, applications for parts counting, with built in Battery Backup, Auto Sleep function, Anti Slip adjustable feet, level bubble and Colour coded and sealed keypad makes it a true winner in its class. Recommend by customers for its simple to use design.   Standard Features Tare Function Counting Function Zero Tracking Check Weighing Function Hold Function & Peak Hold Function In-built Battery Charger* Weight Stable Indication Auto Sleep Function To Save Battery Over-Load Protection & Indication Battery Power Indication & Low Battery Indication In Built RS 232 For Interface With Computer Key Board : 8 Tactile Keys Color Coded Key Board Battery Back-up : 6V/4.5Ah – 48 Hours of Operations *Note: Battery will not be supplied with the scale   Range ModelCapacityAccuracy DS-220 3 kg 100 mg DS-220 6 kg 200 mg DS-220 15 kg 500 mg DS-220 30 kg 1 g HSN Code: 8423 8100 Resolution: 1/30000 Platform Size: 315 x 220 mm MOC Housing: ABS Plastic MOC Pan: Stainless Steel 304   Technical Specifications Model DS Description Digital Weighing Precision Table Top Scale Physical Dimension 330 x 345 x 115 mm (±5 mm) Net Weight Approx 3.5 Kg (Without Battery) Weight Sensor Aluminum Loadcell–IP 65 Processor 8 Bit Arm Processor Key Board 8 Tactile Keys Display Type LCD with Symbols & MOON Backlight No. Of Display Window Display (Front & Back Display) Display Size 30 mm - Front Display & 20mm - Back Display Repeatability ±1d Linearity ±1dAt Half Load & ±2d At Full Load Creep ±2d(for 3 minutes with full capacity) Calibration Method External Calibration Software Based Power Connector 3 Pin Mains Cord (5A) Power Supply 150 V to 230 V (AC) Frequency 50 Hz Power Consumption < 2 Watt Approx. Operating Temperature 0°C to 45°C Operating Humidity 95% RH Max (Non–Condensing) Battery Capacity 6V / 4.5 AH Over-load 100% Of Scale Capacity +9e Safe-load 150% Of Scale Capacity Stabalisation Time < 3s Internal Resolution 20 Bit ADC - 10,00,000+ counts Sampling Rate 20 Samples / Sec   Factory Options Opt 113 - USB Output for Connection to PC.

Designed for use in Jewellery, laboratory, industrial or education applications, the EJS features easy-to-use five-button operation, a high bright Green LED display and combined with multiple weighing units, the EJS is the best portable balance in its class! Get the best value for your money, without compromising in precision and reliability. Rely on consistent readings and excellent repeatability ensured by EAGLE quality and technology backed by efficient after sales service. You can’t go wrong with the new EJS Series. The EJS has everything you need for standard applications. Standard Features Tare Function Counting Function Zero Tracking % Weighing Function Accumulation Function Check Weighing Function Multiple Weighing Units – g, t, ct, oz, ld, kg. In-built Battery Charger* Battery Level Indication Weight Stable Indication Anti-Slip Adjustable Leveling Feet, Key Board : 5 Tactile Keys Colour Coded Key Board Battery Back-up : 48 Hours - Battery Fully Charged Test Weight for Calibration *Note: Battery will not be supplied with the scale Range ModelCapacityAccuracyResolution EJS 130 300 g 5 mg 1/60000 EJS 130 300 g 10 mg 1/30000 EJS 130 600 g 10 mg 1/60000 EJS 130 1000 g 10 mg 1/100000 HSN Code: 9016 0000 Platform Size: 128 mm Diameter MOC Housing: ABS Plastic MOC Pan: Stainless Steel 304 Technical Specifications Model EJS– 130 Description Digital High Precision Weighing Scale Physical Dimension 256 x 175 x 75 mm (±5mm) Net Weight Approx 1.2 Kg (Without Battery) Weight Sensor Precision Aluminum Loadcell – IP 65 Processor 8 Bit Microcontroller Key Board 5 Keys Display Type 7 Segment LED - Green Display With Symbols No. Of Display Window Single Front Display on Scale & Remote Display Display Size 20 mm Display Repeatability ± 1d Linearity ± 1dAt Half Load & ±2d At Full Load Creep ± 2d (for 3 minutes with full capacity) Calibration Method External Calibration Software Based Power Connector 12V DC Adapter Power Supply 160 V to 230 V (AC) Frequency 50 Hz Power Consumption Less Than 8 Watts Operating Temperature 5°C to 45°C Operating Humidity 95% RH Max (Non – Condensing) Battery Capacity 6V / 1.3 AH Over-load 100 % Of Scale Capacity +9e Safe-load 150 % Of Scale Capacity Stabalisation Time < 4s Internal Resolution 24 Bit ADC (1,65,00,000+ Counts) Factory Options 1. OPT077 - Remote Display – 20mm Super Bright Green LED 1.5m Wire 2. OPT112 - Foldable Shield for Protection From Wind

Highland balances have what it takes for basic lab work, field use and various industrial applications. They feature multiple weighing units, RS-232 and USB interfaces, rechargeable battery pack and AC operation, capacity tracker, adjustable feet and level, lock down and more. Density and specific gravity determination are easy with the below balance weighing feature, and the removable draft shield eliminates wind disturbances outdoors or in drafty environments. ShockProtect™ overload protection keeps the performance of the Highland safe and secure, and the HandiCal™ internal calibration weight provides reliable readings time after time. With built in applications for parts counting, percentage weighing and totalization accumulation, Highland balances are packed full of useful features.

Operating Temperature : 0°C to 40°C

Net Weight : 2 kg

Its compact and convenient to carry. With an attached flip down wind protect never before on a pocket scale. 4 weighing units, a 10 mm high LCD display, Anti Slip adjustable feet, and soft touch keyboard.If its precision weighing on the go this is the model for you then.     Features 4 Weighing units Gram(g), Carat(ct), Grain(GN) and Pennyweight(dwt) Flip-down Shield to protect weighing surface 10 mm LCD display Easy 4 key operation Counting function External calibration Low battery indication Zero tracking Precision load cell technology Compact and convenient to carry Simple and user-friendly operation Highly Accurate ,Stable and Reliable Sleek Modern Design Auto sleep/power down function to save battery life Overload indication     Range ModelCapacityReadability PKT 001 DIA 10 g / 50 ct 1 mg PKT 002 DIA 20 g / 100 ct 2 mg     Specifications General Specifications Particulars Stabilization Time 3 to 5 Seconds Operating Temperature +5°C to +35°C Operating Humidity 95 % RM MAX.(Non-condensing) Overall dimensions (L×W×H) 128 × 85 × 42 mm Net weight 400 g Pan Size 40 mm Diameter Technical Specifications Particulars Model PKT 001 DIA PKT 002 DIA Capacity 10 g / 50 ct 20 g / 100 ct Readability 1 mg 2 mg Repeatability ± 2d Linearity ± 2d DC Power Supply 1.5 x 3 AAA Batteries

Providing you the best range of Weigh Pad such as Portable Axle Weigh Pad, Precision Weigh Pad and Ultraslim Weighpad with effective & timely delivery. Suitable for Industrial applications such as Axle Load Survey, Mines, Ports, Automobile Industries etc. These help determine wheel-load .The weight pads provide a convenient, portable and versatile method of determining truck weight. Features Dot matrix LCD Display with back light With 24 independent micro load cells in each pad to ensure accurate readings time after time. Large weighing surface – extremely low profile ensures ease in weighing. Available in capacities from 20 tons Machined from high strength and light weight Aircraft grade Aluminum Colour coded and sealed keypad Simple user-friendly operation 5 M Steel encapsulated interface cable suitable to withstand hostile environment.   Built-in micro printer Handles provided for ease of movement Range 2 Pad Systems ModelCapacityReadabilityPlatform Size ETSB – 20 P2 20000 kg 100 kg 800 x 430 x 30 mm 4 Pad Systems ModelCapacityReadabilityPlatform Size ETSB – 40 P4 40000 kg 50 kg 800 x 430 x 30 mm ETSB – 60 P4 60000 kg 100 kg 800 x 430 x 30 mm Notes:2 Pad System Can be used for Static or Dynamic Weighing. However the accuracy would vary depending on the type of weighing. Typical accuracy for Dynamic Weighing would be 2.5 ~ 3.0 % where with Static Weighing typical accuracy of 0.1 ~ 0.3 % can be achieved. Specifications General Specifications Particulars Operating temperature -10°C to 65°C Operating humidity 95% RH Max. (Non-condensing) Weight Approx 40 kg with Ramps and 25 kg with Ramps. Technical Specifications Particulars Internal Resolution 20,00,000 AC Power Supply 100~250V DC Power Supply 6V Frequency 50~60HZ Power Consumption Less Than 6 Watts Static Accuracy 0.25 % of Full Scale or better Dynamic Accuracy +/- 3 % of full scale Over Load Capacity 200 % of full scale Stability 0.5 % full scale Options Wireless Hand Held Indicator

20,00,000 Internal Resolution Full Digital Calibration 12.5 mm High Super bright LED Display Built-in Battery Backup Modular Design Compact And Easy To Install Full Stainless Steel Housing IP 65 Protected Full Stainless Steel Junction Box IP 65 Protected Mild Steel Or Full Stainless Steel Weighing Bowl

Do you find yourself holding your breath every time you go to your dietician for a regular weight checkup? Now, you can keep track of your weight right at home. Get yourself a simple bathroom scale so you stay healthy always. This entry level weighing scale machine has a large platform with an anti-slip foot mat and a partial view display window for ease of use. Features Easy to get on and off the large platform Anti-slip OVC foot mat Easy to read large display window Heavy Duty structure for durability Zero adjustment is provided Available in 2 colours – Black and White Approved by the Government of India Department of Legal Metrology Each and Every Piece Stamped and Verified by the Weights and Measures Department Range ModelCapacityReadability EMP 4001A 136 kg 1 kg Specifications General Specifications Particulars Overall dimensions 280 x 290 x 45 mm Net weight 2 kg Technical Specifications Particulars Model EMP 4001A Capacity 136 kg Readability 1 kg Window size 65 mm radius

Equipped with 4 High Precision Strain Gauge Sensor System. 8 mm Unique Design Tempered Glass. Measures Body Fat %, Water %, Body Muscle % & Body Bone % Using BIA Principle. Displays Body Weight At Same Time. Features Equipped with high precision Spring ABC  Plastic housing Zero Adjustment Provided Big tray to weigh fills 5 kg at time Removable tray without spilling the Ingredients Washable tray when required Best used to weigh Vegetables/ Fruits and other Grocery items (FOR DOMESTIC USE ONLY) Easy to read Marking High quality and precise in measurement Available in 3 elegant colours to choose from Approved by the Government of India Department of Legal Metrology Each and Every Piece Stamped and Verified by the Weights and Measures Department Range ModelCapacityReadability EMK 5003A 5 kg 25 g Specifications General Specifications Particulars Overall dimensions 127 x 122 x 160 mm Net weight 430 g

Designed with mechanical attributes that guard against shock and overload to protect the load cell. Colour coded and sealed keypad, a large LCD with clear unit indicators and bright backlight make it simple to use. Quickly zero the balance or toggle through available weighing units with a quick press of a button. It unique draft shield eliminates wind disturbances outdoors or in drafty environments. With built in applications for parts counting and percentage weighing make these balances full of useful features.

Highland balances have what it takes for basic lab work, field use and various industrial applications. They feature multiple weighing units, RS-232 and USB interfaces, rechargeable battery pack and AC operation, capacity tracker, adjustable feet and level, lock down and more. Density and specific gravity determination are easy with the below balance weighing feature, and the removable draft shield eliminates wind disturbances outdoors or in drafty environments. ShockProtect™ overload protection keeps the performance of the Highland safe and secure, and the HandiCal™ internal calibration weight provides reliable readings time after time. With built in applications for parts counting, percentage weighing and totalization /accumulation, Highland balances are packed full of useful features.   Features 100% Tare range Backlit LCD with 6 - 16mm high digits and capacity tracker 15 weighing units Shock Protect™ overload three-point protection Can be stacked for storage (120mm pan size only) Lock down mounting slot for Kensington™ type lock Removable draught shield (120mm pan size only) Below balance weighing with hanger Easy access to the rechargeable battery Dual tare keys Handical™ manual internal calibration with built-in mass External calibration Auto power off Low battery indication DC Adapter Simple user-friendly operation Zero Tracking Anti-slip adjustable leveling feet Colour coded and sealed keypad Precision load cell technology Large stainless steel pan Overload protection   RangeModelCapacityReadability   HCB 602H 600 g 10 g HCB 1002 1000 g 10 g HCB 123 120 g 1 mg   Specifications General SpecificationsParticulars       Stabilization time 2 seconds Operating temperature 0°C to 40°C Housing ABS plastic with stainless steel platform Overall dimensions (w x d x h) 170 x 245 x 80 mm Net weight 2 kg Pan size 120 mm (Diameter) Technical SpecificationsModelHCB 602HHCB 1002HCB 123     Capacity 600 g 1000 g 120 g Readability 10 g 10 g 1 mg Repeatability (S.D.) 20 mg Linearity (±) 20 mg Power Supply 12V DC 800 mA adapter and internal rechargeable battery Units of measurement Gram (g), Carat (ct), Pound (lb), Ounce (Oz), Dram (d), Grain(GN), Troy Ounce (Ozt), Pennyweight(dWt), Momme(MM), Taels t.(TL.t), Taels C. (TL.C),Taels T. (TL.T), Tical (ti), Newton (N), TI.T, t,g2     Options In-Use cover Hard carry case Kensington type lock & cable Thermal Printer Replacement Paper-pack of 5 rolls Adam DU Data Collection Software RS-232 Cable USB Cable

  The PGW series of Balances are designed to meet the needs of Laboratories, Schools, Industry and commercial users offering a wide range of applications. Provides quick statistical data display or output of weighed samples. Provides rapid weighing response coupled with high precision measurement. Sturdy design and easy to use make it a winner in this class. Features 100 % Tare range Backlit LCD with dual digits (24 mm) and capacity tracker 18 Weighing units (including one custom unit) Selectable digital filtering for animal / dynamic weighing Adjustable filters Counting function Date and time Multilingual display Modern low profile design Solid metal housing Lock down mounting slot for Kensington™ type lock Dual tare keys Splash proof to protect from accidental spills Removable draft shield supplied on 0.001g readabilities GLP print outs External calibration Internal calibration optional DC Adapter Simple user-friendly operation Zero Tracking Anti-slip adjustable leveling feet Colour coded and sealed keypad Precision load cell technology Large stainless steel pan Overload protection Range ModelCapacityReadability PGW 153e 150 g 1 mg PGW 253e 250 g 1 mg PGW 453e 450 g 1 mg PGW 753e 750 g 1 mg PGW 153i 150 g 1 mg PGW 253i 250 g 1 mg PGW 453i 450 g 1 mg PGW 753i 750 g 1 mg Specifications General Specifications Particulars Stabilization time Typical 2-4 seconds Operating temperature 10°C to 40°C Overall dimensions (w x d x h) 251 x 358 x 104 mm Net weight 5.5 kg Pan size 140 x 140 mm Technical Specifications Particulars Model Ext. Cal PGW 153e PGW 253e PGW 453e PGW 753e Model Int. Cal PGW 153i PGW 253i PGW 453i PGW 753i Maximum capacity 150 g 250 g 450 g 750 g Readability 1 mg Repeatability (S.D.) 1 mg Linearity (±) 2 mg Power supply 15 VDC, 50/60 Hz, 800 mA (Input Voltage 100-240 V, 50/60 Hz) Units of measurement Gram (g), Kilogram (kg), Milligram (mg), Carat (ct), Pound (lb), Ounce (Oz), Dram (d), Grain(GN), Troy Ounce (Ozt), Pennyweight(dWt),Momme(MM), Taels Hk. (TL.H), Taels S. (TL.S),Taels T. (TL.T), Tical (ti), Newton (N),Custom unit Options Anti-vibrant table. Density determination kit. Below balance weighing hook Dust cover for PGW In-use dust cover for PGW. RS-232 to USB interfaces cable.

The PW series of Analytical Balances are designed to meet the needs of Laboratories, Schools, Industry and commercial users offering a wide range of applications. The PW Series analytical balances are easy to use and calibrate, and their settings can be adjusted based on environmental changes. It counts, it sums, it holds and it delivers traceable results. No other balance in its class offers as many features in such a compact design. Features 100% Tare range Backlit LCD with dual digits (24 mm) and capacity tracker 16+ Weighing units (including one custom unit) Selectable digital filtering for animal / dynamic weighing Adjustable filters Date and time Multilingual display Force restoration mechanism Solid metal housing Lock down mounting slot for Kensington™ type lock and cable Dual tare keys Splash proof to protect from accidental spills GLP print outs Internal calibration External calibration Counting function AC Adapter Simple user-friendly operation Zero Tracking Anti-slip adjustable leveling feet Colour coded and sealed keypad Precision load cell technology Large stainless steel pan Overload protection RangeModelCapacityReadability PW 124 120 gm 0.1 mg PW 184 180 gm 0.1 mg PW 214 210 gm 0.1 mg PW 254 250 gm 0.1 mg   Technical SpecificationsModelPW 124PW 184PW 214PW 254 Maximum capacity 120 g 180 g 210 g 250 g Readability   0.1 mg   Repeatability (S.D.) 0.15 mg 0.2 g 0.2 g 0.2 g Linearity (±)   0.2 g   Power supply 15V DC, 50/60 Hz, 800 mA (Input Voltage 100-240 V, 50/60 Hz)   Options Anti-vibrant table. Density determination kit. Protective dust cover. In-use dust cover. RS-232 to USB interfaces cable.

Operating Temperature : 10°C to 40°C