Hydraulic Actuators Dealers in Pune (22 products available)

• Type: Actuator
• Material: Carbon Steel
• Application: Gas Valve, HVAC System, Liquid Valve
• Color: Metallic
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Port Size: Multisizes
• Warranty: 6 Months
• Quality: Best

We bring forth high performing Rotary Actuator for our valued customers. The Rotary Actuator uses brushless DC motors as the prime mover to increase efficiency of process system. Rotary Actuator is available in two different specifications such as index mode and the normal mode. Highlights : Compact and symmetrical sizes Superior dynamic performance, precision and silent movements Highly favorable volume/torque ratio Can be used as an index table

• Brand Name: INTELLO
• Country of Origin: ITALY
• Material: m

na

The "Emtork" Electric Actuators are electromechanical units used for operating the final control elements like valves or dampers to control the flow of fluids flowing thru the pipes or ducts. The specific advantages of using these units are : Ease of operation. Remote control facility. Proportional action of final control element in close loop system. Attaining & holding the desired preset position of the valve/damper. Various indications & alarms are available on the remote control panel & also on the unit. Emergency manual operation possible in case of power failure. Works on most convenient & easily available source of energy i.e. electricity. Models available to cover wide range of valves & dampers. Units with Integral starter will save cost of cables. Units with Electronic controller will facilitate field programming. Design The Basic design of the Emtork Actuator consists of an electric motor, reduction gear unit and control compartment. Various models have been developed to suit operating torque, speed, process parameters, area of operation etc. Additional supplementary spur and worm gear boxes are offered to get higher operating torques and quarter turn motion. Linear motion actuators have been developed to impart the required thrust to operate globe valves. The models are available for on / off and regulating duly and also for hazardous area application.

• Brand Name: Honeywell
• Condition: New
• Model: V4055A1031/U
• Gas Valve Type: Non regulated ON/OFF normally closed,fast or slow opening.
• Materials: Nluminium die cast enclosure.
• Maximum Opening Time: 16 s
• Maximum Closing Time: 1s
• Electrical Connection: Screw Terminals
• Ambient Temperature: -23 ... 70 Degree C
• Maximum Operating Pressure: 360 mbar
• Supply Voltage: 120 Vac
• Protection Class: NEMA 3 / IP44
• Type: Standard pressure actuators for on/off control

• Usage: Commercial Vehicles
• Brand Name: Knorr-Bremse
• Condition: New

The Type 3278 pneumatic rolling diaphragm actuator is designed for all industrial applications. This actuator is a rotary motion device ideal for all types of rotary valves. The torque output of the actuator depends on the actuator area, pneumatic supply pressure, spring stiffness, distance traveled, initial compression of the spring, the number of springs internal to the actuator, etc. FEATURES & BENEFITS Field-reversible, multi-spring diaphragm actuator allows changing of fail-safe action Multi-spring actuator offers uniform application forces as well as reduces height and weight. Rolling diaphragm offers increased precision and reduced hysteresis compared to stretching diaphragms. External travel stops are easily adjusted to prevent over rotating valve beyond fully seated or fully open position. Direct attachment of control valve accessory is possible with one external pneumatic connection required. SPECIFICATIONS Size:160 and 320² Max. Rotation:90° Max Torque:730 Nm Options:Reversable fail action, Travel stops

• Voltage: 230 V AC
• Structure: Butterfly
• Material: Stainless Steel
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Nominal voltage frequency: 50/60Hz
• Actuator Type: Electric Actuator, Linear Actuator, Pneumatic Actuator

• Color: Silver
• Brand Name: Saad
• Actuator Type: Pneumatic Actuator
• Actuation: 90 Degree Turn

• Country of Origin: Made in India
• Stroke Length: up to 700 inch
• Load Capacity: 200 N
• Device Type: servo hydraulic linear actuators
•  :  

Valves and ActuatorsWe have the privilege to offer a comprehensive range of Siemens Control Valve to our clients.Acvatix – the new comprehensive range for greater energy efficiencyWith Acvatix you decide for a comprehensive range of valves and actuators that stand for maximum control accuracy, energy efficiency and availability of HVAC and chiller systems.Our range is electrohydraulic actuators, with magnetic actuators or pressure independent combi valves – Acvatix significantly reduces energy consumption and thus operating costs.The extensive product range offers you valves and actuators with a long service life that meet any control or hydraulic requirements, when it comes to the generation, distribution and usage of heating or cooling energy.They are also ideally suited for district heating/cooling, steam or drinking water applications as well as modernizations or renovations.

Clutch actuation units and gear control units ensure comfortable and safe control of today's commercial vehicle gearboxes. The electro-pneumatic clutch actuator enables electronic control of a commercial vehicle clutch. The control is carried out by solenoid valves for supplying and exhausting the pneumatic actuation cylinder. An integrated stroke sensing unit ensures continuous monitoring of the clutch position. The clutch actuator can be used in a wide range of applications like automated gearboxes, hybrid and clutch-by-wire.

• Usage: Commercial Vehicles
• Brand Name: Knorr-Bremse
• Condition: New

• Material: Metal
• Certification: ISI Certified
• Power: Pneumatic
• Power Source: Pneumatic
• Pressure: Medium Pressure

Features Travel Stops : Two external travel stops permit adjustments of +/-5 degree. Note : Travel stops are located on end caps on size 045 only. Bearings : Top quality bearings and seals for low friction and high cycle life to ensure trouble free operation. Same bearings are used for both high and low temperature operations. Spring Catridges : Modular pre-loaded spring catridges with metal spring guides for use in both high and low temperature applications. Extruded Aluminum Body : Hard anodized extruded aluminum body with honed internal surface for strength,high cycle life, and low fricitonal resistance. Shaft Insert Unique output shaft insert can be selected from a variety of standard sizes, including double D, ISO square, and round and keyed, or can be custom designed to fit any output shaft configuration. Blow-Out Proof Shaft Guide bar in pistons provides an inherent blow-out proof shaft design. Dual Rack and Pinion Design Dual rack and pinion design offers double acting and fail safe operations in same body. Reverse rotation can be accomplished by simply inverting the pistons. End Caps Standard end caps are rounded with no crevices to accumulate contamination. Optional end caps are available to provide 100% stroke adjustment in one direction. Actuator Mounting Manufactured in full compliance with the latest requirements of EN ISO 5211, with provisions for mounting solenoid valves and accessories, comply with NAMUR VDI / VDE 3845 Alloy Steel Shaft : High strength alloy steel shaft with electrolysis nickel plating protection for maximum wear and corrosion resistance.

Valve Actuators, electrical actuators

Actuator, Valve, Ball Valve

Actuator, Flex Coupling, Cam Clutch, drive chains, Sprockets

Pneumatic Diaphragm Liner Actuator, Audco Ball Valve

Electro Hydraulic Servo Actuators, ATOS Hydraulic Cylinders

Actuator, Electric Actuator, Fuse Switchgear, Switch Bed Hanging Cord

Control / Ball Valve Actuators, hand lever valve

Actuator, barton dpu sensor

Hydraulic Actuator, Double Acting Actuators, electromechanical actuators