Industrial Primer Dealers in Bhosari, Pune

• EPOXY BASE PRIMER: GREY

We are ranked among Manufacturers & Suppliers of premium Epoxy Inorganic Zinc Silicate in Pune, Maharashtra, India. Our Epoxy Inorganic Zinc Silicate is excellent for protecting metal surfaces from corrosion. It is a great primer used in various industries. Our company manufactures Epoxy Inorganic Zinc Silicate using up-to-date technologies with superior-grade raw materials. Buyers can order Epoxy Inorganic Zinc Silicate as per requirement and expect on-time delivery.    Scope : A dual pack Paint possessing excellent durability & Weather properties. The product is designed to withstand a constant.    Use : Recommended for use outside structural steel etc.   Product Data : Type : Two Pack, cured with polyamide Composition : Epoxy resin/metallic zinc with silicon vehicle Application: Brush / Conventional spray. Recommended DFT : 50-60 microns. per coat. Theoretical Spreading Rate : 9.0-12.8 Sq. meter/Liter. Practical Spreading Rate : 6-7 Sq. meter/liter. Drying Time :Recoating : Minimum : 6-8 hrs. Surface Dry : 50 mins. Tack Free : 2 hrs. Handle : 4-5 hrs. Hard Dry : Overnight. Complete cure : 7 days Flash Point : Above 30°C. Colour : Grey Thinner : Pragati Make Epoxy Thinner ( PPCOAT EPX T200) Finish : Smooth & Matt. Temperature Resistance : continuous 200°C. Weatherability : Excellent. Flexibility : Excellent.0 Storage Life : Up to 9 month in intact condition or sealed the containers are kept under cover in a dry place under normal temperature conditions.   Surface Preparation : Make full use of mechanical tools along with manual chipping & Wire brushing to remove loose particle rust sanding to Sa2 ½ sand paper. Excessive burnishing of steel is to be avoided. Application : Stir well when apply. To mix proper by manual or machine tool stirrer & apply brush, apply airless gun for achieved recommended DFT.Resistance Guide :  Salt : Good Water : Good. Chemical : Fair   Note : The mix primer must be used off within 3 hours for obtaining better finish. Do not apply when temperature falls below 10°C & when relative humidity rises above 90% do not apply during rain Fog or mist.

We offer a wide range of two pack epoxy primers, a preparatory material, which is coated on the surface that is to be painted. These primers are used for pre-coating of various materials like wood, metal etc.

• Type: Epoxy Paints
• Brand Name: Epoxy And Polyurethane Paints
• Application: Brush, Roller
• Color: Blue, Orange, Pink, White
• State: Liquid
• Country of Origin: India
• Finish: High Gloss
• Packaging Size: 1-5 L, 10-15 L, 15-20 L, 20-25 L, 5-10 L
• Application: Industrial use

We are offering epoxy paints. epoxy flooring can be applied over many different materials, including steel, concrete, and wood. However, concrete is the best surface for laying epoxy floors. Epoxy floor coating performance is directly affected by surface preparation. The integrity and the service life will be reduced significantly if the surface is improperly prepared. A proper surface preparation ensures epoxy coating adhesion to the substrate and prolongs the life of the epoxy coating system.

steel primers, Enamel Paints, high build zinc phosphate grey primers

We are offering epoxy paints.

Primer, base coat, Coating, Decorative Paint, Emulsion Paints

Intermediate Coats, deck coatings, Spray Polyurethane Coating, Wood Coatings

We offer red oxide metal primer, which are anti-corrosive primer for metal. Various auto and forging companies use the red oxide metal primer to provide anti-corrosive layer. Available in different packaging, we can supply bulk orders effectively.

Industrial Paints, resistant paints, acrylic metallic paints

Primer

Bison Zinc Phosphate RSP Primer

Cement Paints, Ladies Perfumes, Gents Perfumes, general perfumes

polish papers, polish

Oil Based Paint, Epoxy Enamel, coating powder

Primer, acrylic paints, PU Paints, qd paints, ral shade, syn paints

Cement Paints, Ladies Perfumes, Gents Perfumes, general perfumes