Minilec India Pvt. Ltd. Pirangut, Pune, Maharashtra

Voltage relays Single Phase Under & Over voltage,Adjustable under over voltage settings,2 CO output relay, Auto Reset.

Single Phase Under & Over voltage, Auto Reset, Adjustable under over voltage settings, 2 CO output relay

Psd 300 indigenously designed variable frequency drive series is of high performance general purpose inverters that incorporate space vector modulation & igbt technology. The output is closely approximates a sinusoidal current wave form to allow variable speed control of any conventional squirrel cage induction motor & are equipped with most of user friendly function & features to enhance in utility. Psd300 have easy to operate keypad for parameter setting. Speed selection, external control & facility to connect rs-232 serial port (optional). Models: psd 301, psd 302, psd 303, psd 305, psd 308, psd 315

We are offering soft starters. Three phase asynchronous motors are used in industry due to its simple construction and low maintenance operation. However, torque and motor current during the starting of a three-phase asynchronous squirrel-cage motor is usually not very favorable. Therefore electronic starters, like ems, are used to reduce the excessively high starting currents. By limiting the accelerating torque, mechanical stress on the material to be conveyed or processed, and consequently on all mechanical parts of drive and driven machine, is reduced. By starting motor at low voltage and avoiding large current peaks during starting with current limit feature, the cost of electricity may also be reduced.

These relays are useful for protection of 3-phase AC induction motors against various hazards. With their unique advantages they eliminate use of a thermalbimetal relay for motor protection. Being current sensing, they are to be selected according to motor rating and are available for practically all ranges of motors. These relays are ideally suitable for Air-conditioning Compressor motor protection, as also for motors in machines, conveyors, craneshoists and lifts, and for pumps. FEATURES Fixedadjustable unbalance settings Fixedadjustable settings for underover voltage, current, load Fixedadjustable trip delays Resetting Auto or Manual Output contacts : 1 CO or 2 CO Choice of enclosures (DIN-Rail, Flush) Models with Micro-Controller based design Serial Communication (RS485) port 2 line alpha-numeric LCD display Use of SMD Technology User-friendly LED indications

Smallest size of single phasing preventer Single phasing, reverse phasing, unbalanced supply, Auto reset, 1 NO output contact suitable for any HPkW rating monoblock pumps

These relays are useful for protection of 3-phase AC induction motors against various hazards. With their unique advantages they eliminate use of a thermalbimetal relay for motor protection. Being current sensing, they are to be selected according to motor rating and are available for practically all ranges of motors. These relays are ideally suitable for Air-conditioning Compressor motor protection, as also for motors in machines, conveyors, craneshoists and lifts, and for pumps.

Specialities : Fixed/adjustable unbalance settings,Fixed/adjustable trip delaysetc.

M-Commander is a micro-processor based Motor protection and Pump management system, suitable for 2 pumps, Sensing voltage, current and temperature, Protecting against Phase Failure, Unbalance, Phase sequence, Under/over voltage, Overloading, dry running, winding over temperature, Over current/Short circuit, Locked rotor, earth fault. Auto/Manual resetting, Adjustable trip settings for UV/OV, UC/OC, O/L, Locked rotor & earth fault, On delay & start-up delay adjustable, 2x1CO output relays RTC based time settings, Water level control. Motor protection Includes Under /Over voltage protection Single/Reverse phasing protection Voltage / Current unbalance Overload trip Over current protection Dry running protection Earth fault protection PTC based winding overheating protection

Products For Agri Sector of water pumps used by farmers. These are primarily to monitor incoming 3-phase supply for Single Phasing, Reverse Phasing and unbalanced supply and stop the pump in case of any fault. Additional features in some models include auto restarting. The products are specifically produced for marketing and use in India only.

The input Voltage and current signals are scaled down through interposing potential and current transformer. In case of reactive transducers the voltage signals are 900 phase shifted. The scaled down signals are fed to precision multipliers working on time division multiplication principle. The multiplier output is processed to provide DC Voltage Current output signal proportional to input active reactive power. For Signal Phase network, only Active Power Transducer is offered. Fro 3 Phase 3 Wire or 3 Phase 4 Wire electrical networks both Active and Reactive Power Transducers are offered for balanced as well as unbalanced load conditions.

Power line transducers are suitable for measuring electrical parameters like ac voltage, current, frequency, pf, kw, kvar and also for dc signal isolation. They are best suited for mcc and pcc panels, amf panels, scada systems, plcs for data acquisition and metering.

Power Line Transducers And Multifunction Meter are suitable for measuring electrical parameters like AC voltage, current, frequency, PF, KW, KVAR and also for DC signal isolation. They are best suited for MCC and PCC panels, AMF panels, SCADA systems, PLCs for data acquisition and metering. Rugged to withstand harsh environments

We are offeringphase failure relays. These relays are suitable for monitoring incoming 3-phase supply from Mains (Electricity distribution line). Being independent of load, they can be used for any HPKW rating of load.

Over voltage relay Single Phase Under & Over voltage, Auto Reset, Adjustable under over voltage settings, 2 CO output relay

offers multifunction meter F3MFM1 to 4 for simultaneous measurement of various Electrical Parameters of 3 Phase 3 Wire or 4 Wire electric power system. The Meters are widely used in application areas where accurate and reliable monitoring of Power Line parameters is essential.Wide range of Auxiliary Power Supply 45 to 300 V (Self Powered also available),Communication with PC, DCS, PLC through RS 232 or RS 485 Port.

Minilec offers multifunction meter F3MFM1 to 4 for simultaneous measurement of various Electrical Parameters of 3 Phase 3 Wire or 4 Wire electric power system. The Meters are widely used in application areas where accurate and reliable monitoring of Power Line parameters is essential.

Country of Origin : 45 to 300 V

We are offering pump protection relays. These relays are useful for protection of 3-phase ac induction motors against various hazards. With their unique advantages they eliminate use of a thermalbimetal relay for motor protection. Being current sensing, they are to be selected according to motor rating and are available for practically all ranges of motors. These relays are ideally suitable for air-conditioning compressor motor protection, as also for motors in machines, conveyors, craneshoists and lifts, and for pumps.

Motor Pump Protection Relays are useful for protection of 3-phase AC induction motors against various hazards. With their unique advantages they eliminate use of a thermalbimetal relay for motor protection. Being current sensing, they are to be selected according to motor rating and are available for practically all ranges of motors.

These relays are useful for protection of 3-phase AC induction motors against various hazards. With their unique advantages they eliminate use of a thermalbimetal relay for motor protection. Being current sensing, they are to be selected according to motor rating and are available for practically all ranges of motors. These relays are ideally suitable for Air-conditioning Compressor motor protection, as also for motors in machines, conveyors, craneshoists and lifts, and for pumps.

Specialities : Fixed/adjustable unbalance settings