Power Relays Dealers in Pune

Power Relays are large type of relay, usually used to switch current to an electric motor or other high-power load. Power relays typically have multiple contacts, and those are usually (but not always) normally-open, so that power to the load is shut off when the coil is de-energized. Perhaps the most common industrial use for Power relay is the control of electric motors.    

• Product Name: 3 Pole Power Relays

power relays : hf3 no 12d 40a h power relays : hf3 no 24d 40a h series hf3 contact configuration 3 form a, 3 form b, 3 form c current rating (no/nc) 40a/40a at 240v ac electrical life* 50,000 ops coil voltages various dc and ac voltages dielectric (kv ac) between contacts 1.5 between coil and contacts 2 typical applications pump / motor controllers, inverter, stabilizers, automation, contactor replacement etc. special features l high temperature withstanding non plastic base l rugged design l fully insulated mounting l complete isolation between poles versions dust protected termination pcb mounting style panel / chassis size (lxbxh) mm 66.3 44.2 43.2 weight (approx. ) gms 155

• Country of Origin: India
• Voltage: 240 V
• Frequency: 50Hz
• Number of Poles: 2 Pole
• Brand Name: Treffer
• Voltage Type: AC
• Rating: 4/6/12

• Voltage: 24VDC
• Number of Poles: 2 Pole
• Application: Industrial
• Brand Name: Omron
• Product Type: Current Relay

  • Durability.     • Direct control by integrated Circuit.     • Load current up to 125 A.     • Load voltage up to 330/480 VAC.     • Isolation voltage 2500 VAC. (4000V Optional).     • Optimum Strength.     • Zero voltage Turn-on, Zero Current Turn-off.     • Fast switching response.     • Chassis mounting.     • Normal Open type.     • LED Indicator Showing Relay ON status.     • Reliable.     • Weight-Approx 100 g.  

• Material: MS
• Features: Specifying fixed stages, No voltage trip(Under voltage Monitoring), Zero current trip, Automatic setting of switching time delay.
• Type: EMR1100S / RM9606 / RM2106 / RM 2112 / PQC
• Patented Control Characteristics: No overcompensation during low load

• Features: 5A switching capability ,10kV impulse withstand voltage
• Coil Voltage: 3
• Terminal Type: PCB
• Model Type: GB
• Max. Switching Current: 5A
• Size: 20.5 * 7.2 * 15.3
• Contact Form: 1A

Features : Tripping with alarm Completely automatic 4 quadrant regulation Microprocessor based No over compensation during low load Continuous monitoring for defective capacitor stages   Power Factor Control Relay- FRAKO make power factor control relays are micro-processor based & advanced features with harmonic display. This can be interfaced with all types of communication protocols. Fully automatic microprocessor based and simple commissioning. Patented control characteristic - no overcompensation during low load. Measurement and monitoring of harmonics. Over current trip function - protection for capacitors. Four-quadrant regulation. Continuous monitoring for defective capacitor stages through self adjustment of control program. Zero voltage and zero current tripping with alarm signal. Manual / Automatic operation with ability to switch each individual capacitor stage ON or OFF.    

• Insulation Resistance: 100 M Omega
• Dielectric Strength(Betweem Coil & Contacts): 1500VAC
• Electrical Life: 1 * 10 to Power 5
• Mechanical life: 1 * 10 to Power 6
• Operating Temperature: -25 Degree C
• Terminal Type: PCB
• Weight: 28gm Approximately
• Contact Form/Resistance: 1C / 100 M Omega Max. @ 1A/ 6VDC
• Contact Material: Ag Alloy
• Contact Capacity: 40A @ 250VAC / 40A @ 28VDC
• Coil Volatge(DC): 12
• Coil Power Consumption: 0.9W
• Dielectric Strength(Betweem Open Contacts): 1200VAC

• Voltage: 220-240 V,12 V DC
• Mounting Type: PCB Mount
• Brand Name: Hongfa
• Current: 15A
• Coil power: 360mW

• Voltage: 14VAC,DC12V
• Type: Voltage Relays
• Model Name/Number: KT-683
• Current: 40 A
• Usage/Application: multi
• Temperature Range: -40 to 85 Degree C

  HYBRID POWER RELAYS - RHP       20 A in a case only 17.5 mm wide Service life > 5 million operations at full load Silent operation Function contactor - impulse relay - day/night contactor Clips onto a 35 mm DIN rail UL/@UL (listed) approval pending NF-USE label pending "CE" / Low Voltage Directive conformity   Operating principles   Contactor The contactor output is closed when the control voltage is present at the control input terminals.The contactor output is open when there is no voltage at the control input terminalsThe LED is lit when the output is active

Power Relays, High Voltage Capacitor, Industrial Fans, Electronic Resistors

Power Relays, Industrial Electronic Components, Resistors, Soldering Irons

Rm Series Miniature Power Relays, Combination Display Lights

Rr Series Power Relays, Relays, Photo Sensors, Ry Series Miniature Relays

Leone PCB Power Relay, Transient Voltage Suppressors Diode, Triacs