Sand Filters Dealers in Pimpri Chinchwad, Pune

The gravity sand filter or rapid gravity filter are most commonly used in Municipal water purification plants worldwide. They use relatively coarse sand and other granular media to remove particles and impurities that have been trapped in a floc through the use of flocculation chemicals. Water and flocs flows through the filter medium under gravity and the flocculated material is trapped in the sand matrix. These filters are typically designed as part of multi-stage treatment systems used by large municipalities. Chemical Dosing SystemsClarifierFilters Gravity Sand FiltersPressure Sand FiltersActivated Carbon FiltersDual Media FiltersSide Stream FiltersIron Removal Filters Reverse Osmosis PlantsDM Plants  

Sadgurruu Industrries is the most reliable name among the existing manufacturers and suppliers of Irrigation Sand Filters. We are stated on top in the market, based on the performance of our Irrigation Sand Filters. Use : To remove organic debris and particulates from waterFiltering water from ponds, creeks or irrigation ditchesCleaningWashing Benefits : Hygiene way of filtrationEnvironment friendlySmooth functioningLess time taking Properties : Simple & effectiveRequire very little attentionSand-filled tank to trap the sand particlesSignals when the tank needs to be back flushed by reversing the water flowMake the dust harder for the water to pass throughCauses the pressure in the tank to riseAccumulates dirt in the space between the sand particlesCleaning is done by back washing so that back-wash water must be filtered Applications : Power plantsRe-factoriesMetal industries

Sand filtration is frequently used and very robust method to remove suspended solids from water. The filtration medium consists of a multiple layer of sand with a variety in size and specific gravity. Sand filters can be supplied in different sizes and materials both hand operated or fully automatically. Raw water pump is used for generating necessary operating pressure in the pressure sand filter. Raw water is passed through CHEMTRONICS Multigrade Sand Filter at a pressure of 3.5 kg cm ² to reduce the suspended solids present in the raw water.

We offer sand filter.sand filtration is frequently used and very robust method to remove suspended solids from water. The filtration medium consists of a multiple layer of high silica sand with a variety in size and specific gravity. sand filters can be supplied in different sizes and materials both hand operated or fully automatically. A special application of a sand filter is the removal of iron in surface and ground or well water. An iron removal installation consists of a aeration to oxidise and precipitate the iron and manganese, followed by removal of the precipitated particles with the sand filter. During service water enters from the top, travels through the filtering media & goes out from the bottom. The suspended solids in the water get trapped in the filter & we get clean clear water at the outlet. This accumulated dirt (suspended solids) needs to be removed otherwise the filter will get choked & will result in less treatment flow, damage to the filter, damage to the pump, etc. The cleaning operation of the filter is called backwash. This backwash operation needs to done once the differential pressure across the filter reaches 0.8 kgcm2 or 24 hours of service cycle whichever is earlier.

Sand Media, Effluent Water Treatment Plant, Sewage Treatment Chemical

Pressure Sand Filter, Dual Media Filter, Reverse Osmosis Plan

Gravity Sand Filters, Raschig Rings, Side Stream Filter

Sand Filters, Garnet Sand, Lamella Clarifier, Resin