Tube Fittings Dealers in Pune

ELCON TUBE FITTINGS come to you completely assembled, finger-tight. They are ready for immediate use. Dis-assembly before use can result in dirt or foreign material getting into the fitting and causing leaks ELCON TUBE FITTING are installed in three easy steps. Insert the tubing into the ELCON TUBE FITTING. Make sure that the tubing rests firmly on the shoulders ofthe fitting and that the nut is snug tight, in this position the tube does not rotate by hand. Before tightening the ELCON nut, scribe the nut atthe 6.00 o'clock position. Now while holding the fitting body steady with a backup wrench, tighten the nut one-and-one quarter turns* Watch the scribe mark, make one complete revolution and continue to the 9.00 o'clock position. *For 1/8", 3/16", 3 & 4 mm size tube fittings, only % turns from finger-tight is necessary the joint is now complete. HIGH PRESSURE APPLICATIONS, HIGH SAFETY FACTOR SYSTEMSDue to the variation of tubing diameters, a common starting point is desirable. Therefore, use a wrench to snug up the nut until the tubing will not turn (by hand) in the fitting. Now tighten the nut one-and-onequarter turns and the fitting is ready to hold pressure well above the working pressure of the tubing. RE-TIGHTENING INSTRUCTIONSDue to the variation of tubing diameters, a common starting point is desirable. Therefore, use a wrench to snug up the nut until the tubing will not turn (by hand) in the fitting. Now tighten the nut one-and-onequarter turns and the fitting is ready to hold pressure well above the working pressure of the tubing. THREAD SPECIFICATIONSELCON connectors have one or more tubing end connections and the others with male or female pipe threads there are a variety of pipe threads for which ELCON Double Ferrule Fittings are available. The most popular thread connections are the American National Pipe thread (NPT) British standard pipe threads (BSP) and metric threads. These threads belong to standards of individual countries as well as iso where they have been codified All ELCON Fittings with pipe threads or stud end threads conforming to the specifications as detailed bellow American National Pipe Thread (NPT) : reference specification ASA B2. 1: 1960ISO parallel pipe threao ( British standard pipe thread ) :Reference specifications BS 2779. ISO 228/1 DIN 259.JISB 0202.IS 2643 ISO taper pipe thread (British standard pipe taper thread ) Unified National pipe threads: Reference specifications ASA B1 1: 1964

We have been counted amongst best Syphon Pipes U type manufacturers and suppliers from India. Our syphon pipes are available in all the shapes and sizes. We also manufacture and supply syphon pipes Q type that is exclusively available with us. Our multifarious types of syphon pipes and others pipes are easily available at the most affordable rates. Pigtail & U Type Syphon Designed for high temperature & high pressure steam application manufactured from seamless CS, SS 304 /316 pipe. Size - 1/4" to 1" pipe, sch 40, 80, 160. Connection - S/W, Screwed NPT, BSP, Male/ Female, Swivel type

PushOne Fitting (for general air pressure, Frame resistant) Features PushOne connection of tube Electoless nickel Plated White body illuminative to working environment Flame-resistant resin (compliant V-0 of UL94 standard) Sealing-processed R thread.

• Inner tube: Synthetic rubber resistant to LPG and Propane/Butane gases • Reinforcement: High tensile synthetic textile • External cover: Orange synthetic rubber resistant to abrasion and weather • Temperature: -30 °C / +70 °C • Safety factor: 3 : 1 • Marking: In compliance with the below mentioned standards • Working pressure: 30 bar • Bursting pressure: 75 bar • Standards: EN 16436-1 (hose) EN 1256 (hose assembly) • Standard EN 16436-1 replaces DIN 4815-1, during 2015  

We provide the Pneumatic Push On Fittings of Janatic make. We are professionals in providing an unmatched range of Two Touch Fittings that are used in various industries for different purposes. These are precisely engineered using optimum quality raw materials as per the defined quality standards. These Pneumatic Push on Fittings are widely applauded for their corrosion resistance, dimensional accuracy and reliability. Swivel Elbow (SE) Material : AluminumFinish : Blue anodized Swivel Tee (ST) Material : AluminumFinish : Blue anodized Additional Information Minimum Order Quantity : 100Packaging Details : Packaging and Forwarding will charge Extra.Delivery Time : 1 week

Manufacturer & Supplier of Hose Fittings & Hose Fitting. Our product range also comprises of Rubber Sheets, Electrical Mats and Rubber Conveyor Belts. Gaurav Rubber Industries are a prominent manufacturer, trader and supplier of impeccable quality array of Hose Fitting. The offered hose fitting are available in various specifications, which fit the diverse requirements of clients. These hose fittings are designed and manufactured using finest quality raw material and innovative technology in order to meet international quality standards. Besides, clients can avail these hose fittings from us at affordable prices.  

The half flare tee is designed by KKI so as to ease its installation . They can be used extensively still using nominal maintenance.

For use on rear tyres of tractors specially designed for adding liquid ballast to tyres for increased traction. Both air as well as liquid is sealed in the tube. The core housing containing the valve core is removed as a complete unit, giving a larger opening for the passage of liquid.

We offer comprehensive range of tube bending services, we are equipped with 2 nos of bending machines of high capacity which are capable of tube bending upto 4" dia with various bending dies readily available. Our services are available as per the given specifications and information by our valuable clients. Our services are ideal for the boiler tubes and we offer these tube bending services with high precision and optimum quality to the clients.

Revata Engineering offers a wide variety Couplings for Casing, Tubings and Line Pipes. The Tubing / Casing and Line Pipe Couplings are manufactured to meet the requirements of API 5CT and API 5L certifications respectively.

The tubes and tube bends are easy, reliable and flexible components for the auger conveying. Your feed will be transported to the target without quality losses.   The Advantages at a glance: universal usable for each type of stable for high conveying capacity fast and easy assembling high class Plastic (very high impact and UV-resistance rigid-PVC)

The Tube Fittings match with the tubing requirements in various industries like petroleum, oil, chemical, gas and pharmaceutical. The fitting accessories are designated by us by making use of premium grade materials along with the implementation of most advanced techniques. These fittings are available in divergent sizes, diameters, shapes and specifications in compliance with ANSI, ASTM, DIN, JIS, GB and BS quality standards. The fittings offered by us are extensively appreciated for their outstanding attributes like no impact of temperature variation, low linear expansion coefficient, leak proof joint system, quick disconnections and precise dimensions. 

Along with our range of excellent products, we also manufacture and supply high quality range of Hose Fittings. We offer wide range of these hose fittings that are corrosion resistant and very durable made from premium range of raw materials sourced from trusted vendors in the industry.  These fitting are available in BSP, Metric, JIC, UNF, ORFS.  Fitting are manufactured for all hoses ranging from low pressure to high pressure hoses.

Tees, Crosses, Long Sweep Elbows and 180 deg. Elbows. Size: 2� through to 6� with working pressure between 5000 psi and 15000 psi. Available in following grades: Alloy steel, SS410, Duplex, etc.

With our modern transportation amenities, safe and on-time deliveries are rendered by us! We comprehend that natural and physical damages can cause harm to goods and hamper with the quality. Therefore, we make sure our products are wrapped firmly with superior packaging supplies.

These valves save space, eliminate the use of extra, expensive and time consuming piping. They install in seconds. The unique ram-type plug & seat provide reliable, tight shut off longer than any other design available. TV/HAT valves are covered with our standard 36 month warranty & service policy to further reduce maintenance cost. Since TV/HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For heating of temperature sensitive instruments or process fluids, the reduced temperature available for tracing simplifies operations and eliminates overheating problems.     Design Features * Compact, low mass for fast response* Corrosion resistant for long service life* Stainless steel body, fittings, spring and plug* Ram-type plug for tight, reliable shutoff* Eliminates live steam losses* Operates in narrow temperature band* Downstream actuator for greater sensitivity* Operating temperatures unaffected by pressure* Wide choice of set-points