Gate Valves Dealers in Hingne Budrukh, Pune

FM Approved Gate Valve India's first and only valve manufacturer to get the Certificate of Compliance from Factory Mutual for its fire service water control valves, which covers Outside Screw & Yoke and Non-Rising Stem Gate Valves (Metal Seated)   Features: Metal to metal seating for longer service life Rigid and sturdy design with minimum loss of head across the valve Accurate interchangeability of components Accurate parallelism between side flanges Equal taper between wedge faces Perfect machining and press fitting of body and wedge rings Excellent finish on spindle threads resulting in low friction and smooth operation of valves Leak-tightness even after thousands of Open / Close   Applications: Fire service water control valves

VOLFRAM make Cast Steel Flex Gate Valves are tight sealing, easy operation, isolation valves for liquid and gaseous fluids over a wide range of line pressures and temperatures.   Self-adjusting flexible wedge assures tight sealing and minimizes stress concentration under varied service conditions. Stem-wedge thrust closer to wedge centre for accurate wedge movement. Long guide ribs in the body to minimize seat wear. Gate valves are of rising stem, outside, screw and yoke (OS & Y) and with Bolted Bonnet construction. The rising stem indicates open or close position of the valve. The outside screw ensures easy lubrication and prevents corrosion and erosion by line fluids. On request, valves can be supplied with special features like NACE Requirement, Radiography, Magnetic Particle Test, LGC Test and for Oxygen Service etc. Features of Gate Valve: Body & Bonnet: The body is designed for strength to meet the operating conditions and contoured to minimize erosion and resistance to flow. The bonnet is provided with renewable seat arrangement. Flexible Wedge: The one piece, case flexible wedge minimizes stress concentration and assures tight sealing over a wide range of different operating temperature and pressure conditions. Body Seat Ring: The seat ring is welded to provide a bubble tight joint. Back Seat Arrangement: The back seat is designed to relieve back pressure on the stem packing when fully seated. Seating Surface: Gate valves can be offered with stellite seat, if specified. Stellated seat ring provides increased resistance to ware, abrasion and erosion of the sealing surface. Gland Arrangement: The stuffing box holds an adequate packing rings to enhance gland tightness and increases the life of packing rings. Flanged: ASME B 16.5 Raised Face Butt Weld: ASME B 16.5 to suit the corresponding pipe schedule. Standards: Design : API 600 Face to Face / dimensions : ASME B 16.10 Testing : API 598 Valves can also be offered with IBR certification. Accessories: Valves can be supplied with accessories like extended Stem Arrangement, Gear Operation, Pneumatic and Electric Actuators, Chain Wheel Arrangement, Drain Plug and By-pass Arrangement.

Features : Sap Cast Steel Gates Valves Have Been desiged to meet the requirement of API 600 / BS 1414 API 603 / API 6D ASME B 16.34Face to Face and end to end dimension Conform to ASTM B 16.10 / BS 2080 / DINEnd flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DINButt Weld end dimension conform to ASME B 16.25The Stem nut design allows for the removal of the hand - wheel while keeping the Stem and Gate in a fixed positionAnti- frictional Ball bearing are provided in higher sizes and classes.The Streangth of the stem to gate Connection is Stronger than Strength of the Stem at the root of the oprating thread.Outside screw and yoke constructionAll the valves proviede with backseal arrangment Bi - directional Shut-offThe gland is of self aligning two Piece type Deep Stuffing boxBody Parts are Streamlined, Permitting unobstructed flow, reduces tubulence, results in lower pressure drop & lower errosionThe seat-rings are cylindrical botton seatd type having ample cross section for strength are provided with weided in and threddede seat - rings will be Supplied on request. In case of SS valves the seat - rings are integral to Body.The body to bonnet joint is flat in ASTM 150 # valves, a male and female joint is used in 300# & 600# and ring joint is used in higter classes.Valves meet the requirement of fugitive emission Levels shell category B as per MESC SPE 77 / 312 Optins : Solid, flexible, Splitwedge, double disc and parallet slide gate configurations available For low temperature and cryogenic services ( cold box and non - cold box applications)exteded bonnet as per BS 6364 available Locking arrangment .Gear, Electrical, Hydraulic or Pneumatic actuator available

Metal Seated Gate Valve, pneumatic globe valves, ss angle valves

Knife Gate Valves, Butterfly Valves, Check Valves, Foot Valves

resilient seated gate valves