Wall Skimmer Dealers in Pune (53 products available)

• Material: Stainless Steel, Mild Steel
• Oil Recycle Rate: 0-5 L/Hr, 5-15 L/Hr
• Width of Belt: 0-50 MM, 50-400 MM
• Frequency: 0-50 Hz, 50-100 Hz
• Voltage: 0-60 V, 60-440 V
• Phase: Multi

Oil Skimming capacity : 3 LPH Drive Geared Motor:3 Watts,Single Phase,220V,AC,50 Hz/60 Hz RPM :10 rpm Driven pulley : Aluminium Dia : Dia 55 mm Belt width: 34 mm Belt Depth : 350 mm. Overall Dimension :75 x 73 x 60 in mm Top driver pulley is gear drive type on the OD and is designed such that to eliminate any belt slippage. Belt is made of SS304 Steel slats of thickness 1.5 mm and thus it can operate in any type of liquid at any temparature.Belt life is much more than any normal belt due to steel structure with added advantage of maximum oil removal since steel is ideal in oil removal efficiency.

In order to make available high quality product range, we make use of the finest grade raw material that is sourced from the trusted places after complete assurance of the quality. We are known for delivering the orders within the specified time frame owing to our modern transit facilities. Features : Sturdy Fine finish Precise

Be it online payment processing or offline payment processing, we are capable of executing both as per your convenience. We take care of all your transactions made; by this, we make all the procedures transparent. We have developed a separate unit, necessary for making stock of the offerings. In addition to this, we maintain complete hygiene inside the unit.   Features : Long life functionality High performance Reliable

A marine skimmer is a device used to remove organic compounds, food and waste particles from water. It removes certain organic compounds by using the polarity of the protein itself.

• Country of Origin: Made in India
• Type: DISK TYPE
• Usage/Application: Oil Removing
• Model Name/Number: 21-22/MIPL0045

Belt type oil skimmers fitted on stand mechanism to lift the oil up from underground tanks of ETP and other applications and to collect the oil directory into 200 Liters. Drum kept on the earth we use imported oleophelic polyurethane high efficiency belts.

We manufacture drum type skimmers that are motor driven (by air or hydraulics) and turn slowly attracting the oil to its surface and rotating around to the wiper blade which scrapes the floating oil off and it runs into the sump area, where it is picked up by pump suction and transferred to storage. These drum skimmers are the most efficient and the most selective floating skimmers available anywhere, due to the large surface area that is exposed to the floating oil. They are easy to install and operate.

OIL SKIMMER  An oil skimmer is a machine that separates a liquid from particles floating on it or from another liquid.  hese technologies are commonly used for oil spill remediation but are also commonly found in industrial applications such as removing oil from machine tool coolant and removing oil from aqueous parts washers.  The working principle is based on a linear movement of parts through the process; parts are conveyed through the different stages of the process at controlled and changeable speed. Parts can be moved in continuous or indexed for precision cleaning of holes and recesses. Conveyors can be designed in many ways with steel belt, chain and rod type to carry parts or baskets and with necessary parts holding fixtures. Dedicated pneumatically operated reciprocating pressurized spray manifolds with wrapping effect for precision cleaning to attain cleanliness values and to suit parts and the process requirement. Drying systems using air knife with low compressed air consumption or regenerative blowers at an elevated temperatures for water dry off effect.  A common application is removing oil floating on water. Suitable for manufacturing, automobile and aeronautical industries.

• Type: OIL SKIMMER
• Brand Name: GREEN ECO PRO

This is a revolutionary product to keep your coolants clean of floating oils . It increases your coolant life and the tool life as well . You will have no foul smell in coolants and no growth of bacteria or algae in tanks

We are offering oil skimmer.

An endless belt is dipped in coolant tank such that the oil on the top collected. Coolant flows slowly over the belt leaving the oil on the pelt. The belt is rotating to take out oil. The coolant carry over is again transported back the coolant tank. Applications : To take out Un-emulsified oil from coolant Features : • Very compact. Occupies less space. • Auto belt tensioning. • Excellent collection efficiency. • Can be made suitable for viscous oil. • Very smooth & silent operation. • Runs on only one drive. Requires lesser power. • Most economic & cost effective.

• Material: Steel and aluminium
• Frequency: 50- 60 Hz
• Power Source: Electric
• Voltage: 380 V
• Automation Grade: Automatic
• Belt width: 25 mm to 600 mm
• Capacity : 2 LPH to 25 LPH

We are involved in offering Oil Skimmer that is used as a pre-treatment prior to chemical treatment. It removes floating oil from water based effluent to minimize treatment cost , saves coolants by removing tramp oil, reduces fluid disposal costs, prevents plugging of spray heads and filters. This oil skimmer particularly suitable for carriages on machine tools, overhead cranes, welding machines, rolling mills, atomic power plants and numerous other applications. The new design offers robust construction, high load capacity, long life and easy installation as it's key features. Advantages: Most inexpensive way of removing oil from water Conserve parts wash water by removing oily wastes Helps meet government requirements for water discharge Skimmed oil can be recycled and reused as a lubricant or fuel

A disc skimmer is very useful for small tanks with no level variations. Due to robust and simple design it is generally preferred for small individual tanks. This type of skimmer uses disc instead of belt. The skimmer frame structure is mounted on the top of tank coolant collection tank. A stainless steel disc is dipped in coolant surface from top of the tank. The Disc rotates in clockwise direction. Oily scum adheres to the disc surface and wiped and dumped in scum arresting bin. Disc Skimmers using steel discs of Dia-350MM (Depth 100MM) Model. We also provide Split type using disc Dia-425MM (Depth 250MM) with Chain drive mechanism to split the Disc from motor center to shift the Disc downwards to get more depth using same disc dia. All small models are having built with decanter tray arrangement to further separate the oil from the collect Skimmed mixture and water ETC mixture to return back the coolant, Washing liquid etc. back to the tank. Only pure oil is collected.     Features & Benefits Used for removing un-emulsified oil. Filtration capacity : 5 l/hr to 20 l/hr Continuous cleaning operation. SS304 disc. Ease of maintenance. Tank Top mounting. Single drive. Very compact. Ideal for individual machines.      5 HI Rolling Mill  Tandel Rolling Mill  Stainless Steel Rolling  Aluminium Rolling  20 HI Rolling Mill   Cylinder Head Cast Iron Machining  Cylinder Block Cast Iron Machining  Breakliner Cast Iron Machining  Precoating Line  Taper Roller Bearing

The traditional Swimming Pool Skimmers version, which presents the water level lower than the floor level, has a ceramic finishing that enriches the visible part of the pool and helps cleaning operations. This system is ideal for public pools with reduced dimensions. We offer our clients good quality components made of UV ABS confirming international standard. It also enhances the flow speed of swimming pool water by collecting suspending particles of water in its specially designed strainer basket.   Pre-cleaning of water is ensured by hair trap, which is a part of a recirculation system. Filtrating itself is assured by pressure sand filter, which is equipped with a 6-way valve. With this valve the desired mode of operation is set: filtration, rinsing, backwash, circulation or wasting. Water is coming from top to the bottom of the sand filter and impurities are trapped here. After a certain time there is a filter clogging, resulting in increased pressure in the filter. If pressure rises above the reference value, it is necessary to clean the filter. In the washing process, water is coming from bottom to the top of sand filter and removes trapped impurities out of the sand. After rinsing, a 'back wash' comes. Water is going from top to the bottom of the sand filtration and is let out to the canalization for a while, because there are still a lot of impurities in a filter. After this, new filtrating cycle starts again.   Overflow swimming-pool is very popular type of pool because of its possibility of using as both public and private pool. Because of pool´s technological and design solution this pool-type gives the impression of luxury and uniqueness. These pools are also more aesthetic than swimming-pools with skimmer

The Oil Skimmer is mainly used in metal working industries to separate the lubricating oil from the coolant. The coolant is the mixture of various cutting oils and water which when mixed with lubricating oils changes its properties and decreases the efficiency of the machine. The oil submission on surface leads to the generation of fungi and irritating smell around the coolant tank. The oil skimmers are used to avoid this problem. It consists of geared motor that rotates the belt continuously and allows the oil particles to stick on it. These oil particles are then scrapped by a scrapper and collected in a separate oil collecting bin. Available Capacities : 3 LPH to 50 LPH. Features Lowers the generation of fungi in and around the tank Helps in removing the layers of oil from the coolant tank Rigid housing that protects the motor It eradicates the foul smell The belt is made from good quality material ensuring longevity

Belt materials available include corrosion-resistant steel, specially engineered polymer and Elastomer. Wiper material can be Nitrile, CRV, ceramic impregnated rubber and others. Most housings utilizes a corrosion-resistant powder coated finish; 316 stainless steel housings may be available. Abanaki oil skimmers will perform in a full range of liquid water temperatures, with pH between 1 and 13. Belt length is specified by the user; some length restrictions apply. The standard drive on all units is an electric motor and gear reducer. Other drive types available.

• Dimension: L 4.5cm x W 5 cm x H 13.5 cm
• Max Flow Rate: 200L/Hr
• Energy Consumption: 3W
• Benefits: Safe for small shrimps and fishes. Easy cleaning. Adaptive to water level changes. Adjustable flow rate. Multi-directional flow outlet suitable for both marine and freshwater

Our wide range of oil skimmers is designed for the recovery of valuable oil product and prevents oil pollution, it is also used for efficient separation of oil from process fluid. With the self-adjusting mechanism of the wiper in the skimmers, it is prevented from wear and increases its efficiency. We provide our skimmers with the belt that ensure constant pressure and alignment of the machine for smooth functioning. Salient features: continuous oil & tramp oil from process fluid self-adjusting wipers to compensate for wear constant pressure and alignment with the belt are assured minimum maintenance prevents oil pollution recovery of valuable oil products longer service life requires minimum maintenance

• Features: Light in weight , Easy to handle, Durability.

Our company is widely appreciated in offering Leaf Rack Leaf Net Deep Net Skimmer to the clients. This product is widely appreciated by precious clients for rugged structure, lightweight and smooth finish.

The tube type oil skimmer uses a specially formulated 1.0” diameter collector tube (fish tube) that is sized in length for the application and welded into a continuous loop. The 1.0” fish tube collector tube floats on the surface of the water and is driven in a continuous loop by the skimmer. Oils, fats, and grease cling to the outside surface of the fish tube and are drawn into the skimmer. Features: compact design fits almost any tank or pit tubes with up to 100-foot reach safety shut off switch for safe maintenance simple and effective drive design for lasting performance request callback additional information: pay mode terms: lc (letter of credit),tt (bank transfer),other port of dispatch: jntp,mumbai production capacity: 10 per day delivery time: one week packaging details: corrugated box, as per customised

The six primary types of oil skimmers are belt, disk, drum or barrel style, mop, large tube or mini tube, and floating suction oil skimmers. Belt oil skimmers utilize a belt of stainless steel. This belt is lowered into the liquid that needs to be cleaned. The belt then passes through special wiper blades, which remove the oil from both sides of the liquid as it passes through. Disc oil skimmers use a disk that is rotated through the liquid. The oil is wiped off the liquid and placed into a special collection container within the skimmer. Disk oil skimmers are not a good choice for shallow liquids or for places where the liquid level fluctuates, because they are most effective when the entire disk is immersed.

• Material: MS
• Working Temperature: 220 Degree F
• Skimmer Belt Length: Upto 3 m

When it comes to quality service provider Drasla Tech is the leading Oil Skimmer supplier in Pune. Our product is highly efficient, as per customer requirement and having high oil removal rate.

We are the prominent organization of this domain engaged in offering a wide spectrum of Belt Skimmers. The provided skimmer is used in a variety of domestic, commercial, and industrial sectors. At our manufacturing unit, our professionals make sure to use quality materials having high grade properties.

• Material: Mild Steel
• Voltage: 280 V
• Frequency: 50 Hz
• Surface Finishing: Color Coated
• Phase: Single Phase