Zbotic Chinchwad, Pune, Maharashtra

Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 5-20V Digital I / O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 6 The Arduino Uno R3 is a micro-controller board base on the ATmega328 . It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start.

heart rate click carries maximas max30100 integrated pulse oximetry and a heart-rate sensor. it’s an optical sensor that derives its readings from emitting two wavelengths of light from two leds – a red and an infrared one – then measuring the absorbance of pulsing blood through a photodetector. this particular led colour combination is optimized for reading the data through the tip of one’s finger.the signal is processed by a low-noise analog signal processing unit and communicated to the target mcu through the mikrobus i2c interface. developers of end-user applications should note that the readings can be negatively impacted by excess motion and changes in temperature. also, too much pressure can constrict capillary blood flow and therefore diminish the reliability of the data. a programmable int pin is also available. the operates at the 3.3v power supply.main applications:medical monitoring devicesfitness assistant deviceswearable devices

Application : Pulse Oximeter

features: infrared thermopile sensor can measure the temperature without contact by detecting the infrared energy of an object. the higher the temperature, the more infrared energy is produced. thermopile sensing elements consist of small thermocouples on silicon chips that absorb energy and produce output signals. parameter min. typ. max. unit conditionschip size 1.6×1.6 mm2sensitive area 1.125×1.125 mm2detection angle 90 °thermopile resistance 95 120 140 kω temp=25℃noise voltage 45 nv/hz1/2 temp=25℃nep 0.27 nw/hz1/2 blackbody=500k,1hz@25℃voltage response 20.11 vmm2/w blackbody=500k,1hz@25℃responsivity 124 v/w blackbody=500k,1hz@25℃temp. coefficient of resistance 0.1 %/℃ temp=25℃～ 75℃time constant 10 msspecific detectivity 1.0e+08 cmhz1/2/wblackbody=500k,1hz@25℃ntc resistance 100±3% kω 25℃ntc β 3950±1% k 25/50℃

features : easy to assemble and use onboard detection indication effective distance range of 2cm to 80cm a preset knob to fine-tune distance range there is an obstacle, the green indicator light on the circuit board.

Number Of Flower : Infrared Sensor

Brand Name : Zbotic

Made of high quality material, corrosion-resistant, wear-resistant and durable. Supplied internal diameter: 1.5mm,2mm,3mm,4mm,5mm,6mm,8mm,10mm. Big collection of heat shrink tubing, 8 specifications, 5 colors. With a transparent box packaging, easy to store and use.

Number Of Flower : Heat Shrink Tube

Input Supply voltage (VDC): 3.3 ~ 5 Supply Current (mA): measurement 0.3mA standby 60?A. Temperature measurement range: 0~50 degrees Temperature measurement error: ±2 degrees Humidity measurement range: 20%~95%RH Humidity measurement error: ±5%RH

Number Of Flower : Humidity Sensors

14 digital input/output pins, 6 analogue inputs, 16 MHz crystal oscillator, USB connection, power jack, ICSP header The Arduino Uno R3 is a micro-controller board base on the ATmega328 . It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start.

Country of Origin : India

Number Of Flower : Automatic

Condition : New

Architecture : AVR

breadboard power supply module, compatible with 5v, 3.3v. apply to mb102 breadboard input voltage: 6.5-12 v (dc) or usb power supply output voltage: 3.3v/5v can switch over maximum output current:

Number Of Flower : Power Supply Module