PIR Sensor Dealers

Features: 360 Degree-Ceiling mount,micro motion detectable. Photo sensor inside for smart control Run-on time adjustable Ambient lux, setting adjustable 2000 W /625 W loading Can Support IR remote Control also for On/ Off / Auto Control Detection range: 6m for micro motion @2.5height and 12m for walk across motion@ 5 height Warm up time: Approximately 1minute Output: Relay Size: 54(H)x114.5(D) mm With IR Remote Weight:160gms

Features:   ICIR-180D sensor switch can detect the infrared Rays released by human body motion within the Detection area, and then start the load-light automatically.   This PIR Sensor has an extra feature of manual override. ICIR-180D has a longer detection range and wider angle, it is better for security use.   Specifications:   Rated Voltage: 230V AC 50Hz Load Wattage: Maximum 1000W incandescent bulb or Maximum 300W fluorescent lamp Detection Area: Max. 12 meters Detection Angle: Max. 180º Time-delay: From 10±5 seconds to 6±1 minutes adjustable LUX Control Level: From daytime to darkness adjustable Protecti on Class: IP44   Applications:          • Garage         • Corridors         • Staircase         • Near Gate         • Basements         • Parking Area         • Locker/Safe Area         • ATM – College/School/Institutes         • Multi-Apartment Complex         • Hospital / Nursing Homes         • Malls and Many More Places…

Sensor For Outdoor Security turns out more crucial in terms of their performance in extreme temperature conditions and possibility of fooling them by the intruder. A NEGAVEEZ SECURE offers security and convenience in the areas that they cover. Motion sensor is an intelligent device which detects IR Rays emitted by Human Body and controls the ON-OFF operation of electrical loads. When it detects movement inside its detection area, it automatically turns ON the Load (Siren or Security System). Tamper Switch is provided to give an alarm if someone tries to tamper the unit. Additionally, if someone tries to cover the unit with any object so that human movement should not be detected, additional PROXIMITY SENSOR alarm output is provided. Proximity Sensor Detects any object in the vicinity of 100mm with an in built intelligence that if an object is consistently in front of sensor for more than 30 sec, then only output alarm is generated. Thus NEGAVEEZ SECURE Offer you a Valid, FOOL-PROOF Intrusion Signal which can be used with Siren or any Higher End Automation System for SECURITY.

We offer pir motion detector. A pir-based motion detector is used to sense movement of people, animals, or other objects. They are commonly used in burglar alarms and automatically-activated lighting systems. They are commonly called simply "pir", or sometimes "pid", for "passive infrared detector". This wall mountpir sensor works on the principle of passive infrared detection from the infrared heat emitted by human beings. The fresnel lens of this light control motion sensor has an angle of aperture of 180'360' as it is wall mounted and therefore can only detect human motion in front of the lens and not behind it. The detection lens of the light control motion sensor is mounted on a pivot for adjusting the tilt angle to suit the application area applications: main entrance toilet pantry stairways lifts lobby covered parking area lockers room trial rooms office atm malls and many more!!! specifications: detection range 360°180° power source 220-240vac power frequency 5060hz rated load max.1200w (220-240vac) detection distance max.6m(24℃) time delay 10sec± 3sec to 7min±2min(adjustable) installation height 2.2m - 4m protection class ip 44

Our organization is renowned among reputed suppliers of premium and superior grade PIR Sensor across the nation. Safety of the products is the prime concern of the organization. Thus, we store the entire lot in a capacious and well-structured warehouse till the delivery of the orders.   Features : Robust design Accurate reading Simple and easy to use

We are offering pir sensor with direct switching. Directly switches on light when it is dark and human motion is detected. Max. Load : 100 watts ambient light intesity trigger level : can be adjusted as required. On time after triggering : settable from 15 secs to 5 min. Metal mounting clamp provided.

We are offering stand alone pir sensor | pir alarm | pir welcome bell | motion sensor alarm high quality ...... Branded products only easy installation no expert required high quality & reliable

* The PIR detects human movement and temperature of monitored area.* When movement is detected the PIR Sensor will send a signal to the main unit triggering an alarm.* It has a long battery life and very easy to install and maintain.* Batteries can be changed within 1 min without any hassle of removing the covers and screws.  

Walnut Innovations PIR Motion sensor Switch This PIR Motion Sensor is a new type of Energy-Saving light control switch. It works by detecting heat rays emitted by the human body. Auto switching of lights or other fixtures based on human occupancy in residential and commercial buildings. Security systems for triggering of Buzzers or switching on CameraDVR when human motion is detected. TECHNICAL DETAILS : Operating voltage: AC 220-250V 50Hz-60Hz Operating temperature: -20C~+50C PRODUCT INSTALLATION : 1. In order to achieve effective Sensing distance, please keep the switch 1.5 meters high from the ground. 2. The light, such as incandescent lamp which emits high heat should be kept from the switch, at least one meter 3.During installation first time, the switch' initialization will take 30-50 sec. It's natural for the switch to turn onoff voluntarily. 4. When you install the switch on daytime, adjusted to SUN (max), it will work day and night, & when adjusted to MOON (min) it will be work only in the ambient light less than 3LUX means work only in night time or in dark .