Power Engineers Pvt. Ltd Gidc, Rajkot, Gujarat

Frame : We have designed rigid steel frame of shears are to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout its length by hardened and ground guide ways which ensures proper clearance and clean cut.Hold-Down System : To Secure and avoid slipping & bowing, spring loaded mechanical hold-down pads, which holds the sheets securely. result in clean square cut. Hold down units are provided with oversize pads avoids impression on sheet metal.Blades : Our shearing Machines are Equipped with Four Edge, single & segmentally High Carbon, Chromium Steel Blades suitable for M.S. &.S.S. Cutting and Extra long life. Lubrication : All bearing parts and guide surfaces are lubricated Through centralize hand-operated lubrication system.Mechanical Back Gauge : This is a standard equipment provided on all POWER Shears. Scale on the back gauge gives instantaneous reading of distance between shear and back gauge, thus avoiding errors and maintenance encountered in electronic equipment.Finger Guard : Fitted in front of hold-down for operator safety without obstructing viewing. Standard Equipment : Electrical System consisting of motor & Control Panel of Starter, Gear and wheel guard, V-Belts, Hand operated back gauge, Manual Lubrication System, T-slot front gauge, Front scale gauge, instruction ManualOptional Equipment : Hydraulic hold-down system, Automatic lubrication system, Ball roller or Ball Transfer, Foundation bolts, Extension squaring arm.Note : Electrical and Blades are not under Warranty.

Steel body fixed, Inclinable type power pressFram : The frame is of all steel construction, fabricated from Rolled steel plates with suitable cross ribbings. Presses upto 30T will be supplied with C.I. legs. proper alignment of the frame is ensured by machining.Clutch : The clutchis of pin/rolling key-type. the clutch is rigid and well supported. the clutch gives continuous strokes for mass production.Crank Shaft : Crank shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life & accuracy.Flywheel : Properly sized flywheel, is made of high grade cast iron, for storing and releasing adequate energy for the pressing operations, and properly balanced for smooth running.Gears : Gear are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.Table & Ram : Table and fam are made pf high grade heavy duty cast iron & properly seasoned. They are perfectly aligned, to each other to obtain high accuracy & precision press operation.Lubrication : An efficient shot luvrication system has been provided for lubricating the sliding surfaces and moving parts. The lubricant is applied by hand pump.Inclining : Inclinable type presses are provided with inclining mechanism which can be easily det and locked inMechanism : Position by spanners within minutes. the press ils so designed that even in maximum inclined position, it is stable under heavy pressing load.

Frame : We have designed rigid steel frame of shears are to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout its length by hardened and ground guide ways which ensures proper clearance and clean cut.Hold-Down System : To Secure and avoid slipping & bowing, spring loaded mechanical hold-down pads, which holds the sheets securely. result in clean square cut. Hold down units are provided with oversize pads avoids impression on sheet metal.Blades : Our shearing Machines are Equipped with Four Edge, single & segmentally High Carbon, Chromium Steel Blades suitable for M.S. &.S.S. Cutting and Extra long life.Lubrication :Specialized lubrication channels are feeted which serves lubrication to all bearing parts and guide surfaces. Also note that it is hand operated manula system. Mechanical Back Gauge : This is a standard equipment provided on all Shears. Scale on the back gauge gives instantaneous reading of distance between shear and back gauge, thus avoiding errors and maintenance encountered in electronic equipment.Finger Guard : Fitted in front of hold-down for operator safety without obstructing viewing.Standard Equipment : Electrical System consisting of motor & Control Panel of Starter, Gear and wheel guard, V-Belts, Hand operated back gauge, Manual Lubrication System, T-slot front gauge, Front scale gauge, instruction Manual.Optional Equipment : Hydraulic hold-down system, Automatic lubrication system, Ball roller or Ball Transfer, Foundation bolts, Extension squaring arm.Note : Electrical and Blades are not under Warranty.

Power Supply : 400 / 440 volts, 3 phasa, 50 cycles, In Span of 12 Years improvement are contemplated for better performance of machine, Also we reserve the rights to alter the specifications without prior notice. all dimensions are in mm.  

400 440 volts, 3 phasa, 50 cycles, In Span of 12 Years improvement are contemplated for better performance of machine, Also we reserve the rights to alter the specifica

Power brand mechanical Power Presses are coming in both C frame and Pillar type versions from 3 tons to 250 tons capacity in most economical type of construction with several std/optional features such as manual/auto lubrication. systems; knockouts electronics hand safety; single/double or un-geared versions as also pneumatic feeders/ straightness and de-coilers for automation Purpose.Steel body fixed, Inclinable type power pressFram : The frame is of all steel construction, fabricated from Rolled steel plates with suitable cross ribbings. Presses upto 30T will be supplied with C.I. legs. proper alignment of the frame is ensured by machining.Clutch : The clutchis of pin/rolling key-type. the clutch is rigid and well supported. the clutch gives continuous strokes for mass production.Crank Shaft : Crank shaft is made of special alloy steel machined to close accuracy.We have fitted same in bronze bushes for smooth working, longer life & accuracy.Flywheel : Properly sized flywheel, is made of high grade cast iron, for storing and releasing adequate energy for the pressing operations, and properly balanced for smooth running.Gears : Gear are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.Table & Ram : Table and ram are made of high grade heavy duty cast iron & properly seasoned. They are perfectly aligned, to each other to obtain high accuracy & precision press operation.Lubrication : An efficient shot lubrication system has been provided for lubricating the sliding surfaces and moving parts. The lubricant is applied by hand pump.Inclining : Inclinable type presses are provided with inclining mechanism which can be easily det and locked inMechanism : Position by spanners within minutes. the press ils so designed that even in maximum inclined position, it is stable under heavy pressing load.

Standard Accessories to be supplied with machine.1. Main Drive Motor.2. Electrical Control Panel with of 'AUTO' 'ONCH' & 'SINGLE CYCLEAUTO' mode of operation.3. Pair of Foot Switches.4. Pair of Lifting Links.5. Pair of Sheet Supports.6. Fine Stroke Adjustment Rod with Limit Switches.7. Manual Back Gauge with Fine Setting.8. One Suitable 5 way Die and Blade.9. Centralised Lubrication System with HandPump.Optional Accessories1. NC - Operated stroke (Y - Axis) control.2. NC - Operated Back Gauge and stroke control.3. Sheet Support with swing - away stoppers for front gaufing.4. Hardened tools & special toolings.5. First fill of hydraulic oil.

Main Drive Motor, Electrical Control Panel with of 'AUTO' 'ONCH' & 'SINGLE CYCLEAUTO' mode of operation, Pair of Foot Switches, Pair of Lifting Links, Fine Stroke Adjustment Rod with Limit Switches, Manual Back Gauge with Fine Setting, One Suitable 5 way Die and Blade, Centralised Lubrication System with HandPump.