Safety & Pressure Relief Valves Dealers in Rajkot

SIZE 1/2" TO 4" CLASS 150# / 300# END WAFER TYPE STANDARD DIN EN 558-2 MOC WCB / CF 8 / CF 8M / CF3 / CF 3M / CN 7M OPERATION NON RETURN VALVE

We are offering Spring Loaded Disc Check Valves, which is used for mounting in between flanges. Spring Loaded Disc Check Valve is available in different sizes & shapes and highly acclaimed for its corrosion resistance, durability & easy installation. Our range of Spring Loaded Disc Check Valve meets the application requirements of various industries. With a worldwide network, we make sure that all our Spring Loaded Disc Check Valve orders are timely delivered.

The High-Pressure Needle Valve, supplied by us, is manufactured using high-quality galvanized steel, which makes it extremely tough. Safe, reliable and genuine, we make all the transactions using cutting-edge technologies. Not just on the transactions, we keep a vigil eye on the transactions made by you and other parties and ensure that no other party is involved while making payments. We follow strict warehousing rules and thus we keep the extensive range of products safe in our well-structured warehouse, which is supervised by our team of experts.

The dungs fri pressure regulator is recommended for industrial and commercial heating applications and is suitable for natural gas, propane, butane, air and other inert gases. Manufacturing facility. stand-alone pressure regulator and gas filter with threaded flanges with mounting kit, fri pressure regulator with gas filter directly mounts upstream of the dmv (dual multi valve); no piping required. When fri regulator is mounted downstream of the dmv (dual multi valve), the gas filter is mounted to dmv inlet. Regulator output pressure monitored by direct mounting an a2 type pressure switch to fri. Additional ports to sense inlet and outlet pressure are also located on the threaded flanges. Precise and sensitive regulation lock-up regulator (the outlet pressure shall not rise more than 15% or 3 in. W.c, whichever is greater, above the setpoint). Limiting orifice; approved as a ventless regulator by some authorities having jurisdiction. (review applicable codes for vent line requirements) high flow rate easy-to-mount compact light weight

We are a coveted manufacturer of Hex Plug, which is also custom-designed in order to meet the requirements of the customers. Available in the size ½" to 2"and BSPP and NPT type, it is an important pipe fitting. The range is similar to a normal pipe plug as it is threaded in the end, whereas the top or the cover of the plug has a hexagon shape. The range provides an easy connection and cost-effective method that helps to insert two pipes. Also, the main motive of the range is to interrupt the flow in the best possible manner. Made utilizing high-grade material, it is plated with nickel or chrome for better resistance to corrosion and superior finish. We offer the range in varied sizes as per the size of the pipe in which it gets fit.

DL Valves Forged Steel Globe Valves are Bolted Bonnet, outside screw and yoke type, Rising Spindle construction. DL Forged Valves Body and bonnet made from high quality forgings. DL Valve offer Forged Steel Globe Valves in size 12 (DN15) to 2 (DN50) to suit various critical, non-critical applications and pressure rating in 150#300#600#800#1500#2500#. DL Forged Steel Globe Valve manufacturing range covers Regular Port and Standard Port both types of Valve. Regular Port globe valves have fast delivery or ready stock, for Standard Port globe valve do manufacturing on order basis. DL Valve offer Forged Steel Globe Valve in wide range of Body Materials like ASTM A 105 - Forged Carbon Steel, ASTM A 182 F304F304LF316F316L - Forgated Stainless Steel,ASTM A 182 F11F22 - Alloy Steel to suit industrial application. DL Forged Steel Globe Valves are available under any Third party inspection also. For High Pressure & Temperature application Stellited ST6 Face Seat & Disc available. Forged Globe Valve available is Threaded End, Socket Weld End, Butt Weld End and Flanged End Connection. For Flanged End Forged Steel Globe Valve flanges will be a welded with a valve body not integral forged.

・2 built-in spool valves ・Possible to control vacuum adsorption and release with a single valve unit. ・Width 10 mm (Same size as Series SJ3000) ・With a restrictor that can adjust the flow rate of the release air. ・Built-in replacement filter on both vacuum and release sides. ・Combination of the 4 port solenoid valve SJ2000/3000 is possible. (Made to 　Order).

The basic materials that we use for the manufacturing of our entire range are thoroughly checked against numerous quality parameters. Thus, we make sure that we deliver faultless products to the clients. For the safe storage of our offerings, we have installed our own storage facility. Laced with modern amenities, our facility helps us in furnishing urgent requirements of the clients at a time.

Relief Valve that we offer is widely used in different industries and is available in different sizes and shapes. We are counted among the top Manufacturers and Suppliers of Relief Valve from Gujarat, India. Our Relief Valve is manufactured by making use of the optimum quality raw material, obtained from the genuine and trusted vendor in the market. The Relief Valve offered by us is for Massey Furguson Tractor.

Safety Valve(relief valve) for Hydraulic Unit We manufacture various type of relief valves and safety valve. These are used in hydraulic lift pump for various tractors. Also manufacturing for earthmoving equipments like Tata Hitachi, Jcb etc..

Quick Relief Valve that we offer is made using high quality raw material and hence, is durable. We make available Quick Relief Valve in varied designs and sizes in order to cater to variegated requirements of the buyers. In order to maintain the quality, our Quick Relief Valve is strictly checked on various parameters prior to its final dispatch. One can obtain Quick Relief Valve from us at the most reasonable prices.

Salient Features of Spring loaded Disc Type Non Return Valve: • Investment Casting Body Construction • Compact & Rugged Design • Stronger, liter and Smaller than Conventional Swing Check    valve, Hence less Expensive to install and maintain • Single Disc Type • Spring Loaded Disc to Prevent Reverse Flow in Pipe Line • Easy To Installation Between Two Pipe Flanges • Metal To Metal or Soft Seat Option • Maintenance Free Design • Zero leakage (in Soft Seat) • Full Port Opening • Less Pressure Drop • wafer, Flangeless, Sandwich Type • Shorter Length, Required Minimum Space • Offer any 3rd Party or Client Inspection pring Loaded Wafer Disc Check Valve: Flowset Spring Loaded Disc Check Valve - Non Return valve feature a wafer type, compact and rugged design cast carbon steel (ASTM A216 GR.WCB) or stainless steel (ASTM A 351 GR.CF8/CF8M CF3/CF3M/SS304/SS316/SS304L/SS316L) construction and are suitable for any process liquid, air, gas, steam etc. the signal disk check valve (water type signal disk check valve)consists of four main components: the body, disc, a star guide and a spring. The disk check valve are opened by the pressure of fluid and closed through compression spring as soon as flow stops thus preventing reverse flow. The design of wafer design, sandwich Type, flangeless single disk spring loaded check valves allows them to be installed between any flanges of different standard and in any position; including vertical pipelines where the fluid flows downwards. wafer type spring loaded disk check valves is also available with zero leakage by the use of soft seat . flowset valves & Automation has cover disk check valves up to 4”( DN100)size and pressure rating up to PN40.

We are main supplier of this product.