Safety & Pressure Relief Valves Dealers in Vadodara

(77 products available)
  • Glass Pressure Relief Valve

    Glass Pressure Relief Valve

    Get Price Quote

    • MaterialGlass
    • UsageIndustrial
    • SizeAvailable in Different Sizes
    • PatternPlain
    • FeatureDurable, Easy Maintenance.
    • PressureMedium Pressure, High Pressure
    • The Glass pressure relief valve is a simple valve used for controlling and limiting the level of pressure levied on the system or the vessel that can be built by a process, equipment or instrument failure, or the fire. In a Pressure Relief Valve, the pressurized gas is flown into the system to release the pressure.   The glass pressure relief valve is outlined in such a way that it releases a prearranged set of pressure to keep the Glass vessels safe and also prevents other equipment from being harmed due to the intense pressure released exceeding the limit of their design. When the pressure exceeds its limits, the glass pressure relief valve opens up forcefully and releases a small portion of the gas or fluid that helps in maintaining the appropriate pressure in the system.   The Safety Pressure Relief Valve is designed and made up of borosilicate glass and PTFE. The maximum suggested operating temperature of the system is 150°C as well as it works fine under a wide range of pressure.   Working & Operation A simple connection is offered for the safety of the vent as well as after each operation; the valve tends to reset itself without any labor or the material cost of a split disk replacement.   This freshly developed concept of glass pressure relief valve seat production caters to a pressure seal for the seat. The pressure on the seal will increase with the building up of the inlet pressure. The lip present can achieve this on the inner diameter of the seat that is pressing on the side of the plunger.   The pressure of the seat never gets balanced with the weight load as it has in the traditional pressure relief valves as it is not dependent on the weight load for the pressure of the seal. The physical contact between the PTFE seat and the low Friction PTFE plunger allows an easy plunger eviction from the seat at the initial pre-set pressure. Due to a sharp increase in the seat pressure, the valve gets sealed and restricts the gases as well as liquids.   The Glass Pressure Relief Valve is admirably suited to control different levels of pressure inside all types of reactors as well as the vessels where a relief valve Is needed to seal the system against both the gases as well as the liquids.   It can withstand a maximum temperature of 300°F and can take a thermal shock up to 200°F.   Pertinent Features High corrosion resistance qualities Manufactured with TFE construction and Borosilicate Glass High Heat resistance qualities Complete visibility   Benefits of Glass pressure relief valves It is entirely corrosion-resistant. It is made up of TFE and Borosilicate Glass. It has high heat resistance qualities. It’s patented seal ensures a better seal functioning against all types of liquids and gases. It comes with clear transparency or visibility for you to inspect. It bears no replacement cost as the valve resets itself. It has no stuffing box to maintain.   Final Thoughts The Ablaze Export PTFE pressure relief valves were manufactured to use on the systems that require the corrosion resistance ability possessed by PTFE. The operating principle remains constant as priorly used in the regular line of the Safety Pressure Relief Valves having corrosion resistance qualities made from the borosilicate glass.   Ablaze Export glass pressure relief valves have the corrosion-resistant qualities against all liquids as well as gases other than the hydrofluoric acid and the hot concentrated caustics. The Ablaze Export Pvt. Ltd. assures a perfect seal against all our manufactured equipment, as well as liquids and gases.
    ...more
    www
  • Icf Pressure And Temperature Regulating Valves

    Icf Pressure And Temperature Regulating Valves

    Get Price Quote

    • MaterialStainless Steel
    • ApplicationRegulating Pressure And Temperature In Industrial Systems.
    • Connection TypeThreaded Or Flanged
    • TypeValves
    • PackagingBox
    • SizeVarious Sizes Available
    • Pressure RangeTypically 0-1000 Psi
    • Temperature RangeTypically -20°C To 200°C
    ...more
    www
  • High Pressure Valve

    High Pressure Valve

    Get Price Quote

    • Number Of FlowerValve
    • MaterialDuplex Stainless Steel (17-4-Ph),Duplex Stainless Steel (15-4-Ph),Inconel,Alloy Steels
    • FeatureDimensional Accuracy,Optimum Quality,Rust Resistant
    • ApplicationHigh Pressure Hyper Compressors
    • Pressure Rating870 Kg/cm Sq
    • We manufacture High Pressure Valve for high pressure hyper compressors. Our manufactured High Pressure Valve works at pressures of 870 kg/cm. sq. High Pressure Valve manufactured using duplex stainless steels like 17-4-Ph, 15-4-Ph, Inconel and Alloy steels. We make High Pressure Valve available at the best prices in the market. Features : Dimensional accuracy Optimum quality Rust resistant 
    ...more
    www
  • Pressure Safety Valve

    Pressure Safety Valve

    Get Price Quote

    • MaterialMetal
    • Size5inch, 7inch
    • ApplicationGas Fitting, Oil Fitting, Water Fitting
    • PatternPlain
    • Automatic GradeAutomatic, Manual
    • Pressure3-30 Psig
    • FeatureCasting Approved, Light Weight
    • One of the most critical automatic safety devices in a pressure system is the pressure safety valve. The primary purpose of a pressure safety valve is the protection of life, property and environment during an over-pressure event in a pressurized vessel or equipment. An over-pressure event refers to any condition which would cause pressure in a vessel or system to increase beyond the specified design pressure or maximum allowable working pressure. A pressure safety valve is designed to open and relieve excess pressure from vessels or equipment and to re-close and prevent the further release of fluid after normal conditions have been restored.
    ...more
  • Pilot Operated Pressure Relief Valve

    Pilot Operated Pressure Relief Valve

    12,000 / Piece

    • MOQ12000 Piece
    • Brand NameHYDROFORCES
    • Size10, 20 & 30
    • Country of OriginIndia
    • PressureHigh Pressure
    • MediaOil
    • BodyCast Iron
    • Temprature-0° C to 70°C
    • Model: RPG 11 ....Features:- Subplate mounting- Porting pattern to DIN 24 340, form E,ISO 6264 and CETOP-RP 121H- Pipe connection- Insert connection- Three adjustment elements: Rotary knob Hex. head screw with protective cap Lockable rotary knob with scale- Solenoid operated unloading via built-in dirctional spool valve.which is highly accurate and it improves the product quality
    ...more
  • Pressure Reducing Valve

    Pressure Reducing Valve

    Get Price Quote

    Application : Water, Compressed Air, HVAC, etc Maximum Inlet Pressure : 25kg/Sqcm Out Let Pressure : 0.5 to 7 kg/sqcm Mounting  : Horizontal / Vertical / Oblique Maximum Temperature : 130 Degree Centigrade Pressure Gauge : 1/4” Port Connection Size : 15MM to 50MM
    ...more
  • Safety Valve

    Safety Valve

    Get Price Quote

    • BodyCF8 / CF8M
    • Size Range1.1/2” To 4”
    • WasherBrass & CF8
    • DiaphragmViton & NBR
    • Sealing SpacerViton
    • Plug BoltS.S.304
    • Spring CoverCF8 / CF8M
    • Press Adj. Range1˜ 6 kg/ cm2  4 ˜ 10 kg / cm2  20 ˜ 35 kg / cm2
    • Temprature85° C to 220° C
    • EndsScrewed / Flanged
    ...more
  • Steel Hex Plugs

    Steel Hex Plugs

    Get Price Quote

    We are an eminent manufacturer, exporter and supplier of Steel Hex Plugs based in Vadodara, Gujarat. We guarantee that the plugs we offer are made from good quality steel making them strong and durable. The grooves and threading on this product makes it easy to use and screw on. We ensure good packaging, timely delivery and competitive prices on large orders.
    ...more
  • Pressure Reducing Valve, SS-304 WGS

    Pressure Reducing Valve, SS-304 WGS

    2,640 - 3,300 / piece

    • Country of OriginIndia
    • MaterialStainless Steel
    • ApplicationGas Fitting, Water Fitting
    • FeatureDurable
    • PressureMedium Pressure
    • Number Of Way2way
    • Brand NameAIRA
    • MediaWater, Gas
    • Size1/2"
    • TypePressure Reducing Valve
    • Port Size1/2"
    • Temperature Of Media85degree C
    • Body Bonnet & Working Parts : SS-304 Size : 15mm (1/2") to 150mm (6")  Pressure Adjustment : 1 to 6kg/cm²  Range : 4 to 10kg/cm²  Maximum Inlet Pressure : 18kg/cm²  Temperature : Upto 85°C Seals : NBR End Connection : Screwed / Flanged  Media : Water / Oil  Class : 150#
    ...more
  • SS Safety Relief Valves

    SS Safety Relief Valves

    15,500 / Piece

    • MaterialStainless Steel
    • Packaging TypeBox
    • Country of OriginMade in India
    • Brand NameA ONE
    • Valve Size3/4x1 Inch
    • PressureHigh Pressure
    • Usage/ApplicationAir
    ...more
  • Pressure Relief Valve

    Pressure Relief Valve

    24,000 / Piece

    • MaterialBrass
    • Brand NameTankcell
    • SpecialitiesHigh tensile strength, Smooth surfacing, Longer service life, Accurate dimensions
    • PressureLow Pressure
    • MediaGas
    • Port Size1/2" - 2"
    • FinishPolished
    ...more
  • GM RELIEF / SAFETY VALVE

    GM RELIEF / SAFETY VALVE

    Get Price Quote

    • UsageWater/Oil/Steam/Air
    • Product Description:Straight / Angle Type
    • Body Material:GM
    • Type of Seat & DiscIntegrated Seat/ Renewable Disc
    • Trim MaterialCU Alloy
    • End DetailsScrewed Female BSP Parallel/ Flange BS:10 Table F (Undrilled)
    • Working PressureMax. 150 PSIG
    ...more
  • Pressure Relief Valve

    Pressure Relief Valve

    Get Price Quote

    Pressure Relief Valve are designed for only relief of pressure application this provides protection against over pressure condition.        
  • Pressure Relief Valve

    Pressure Relief Valve

    Get Price Quote

    Contact Malekpur Hydraulics to avail a huge assortment of Pressure Relief Valve. The Pressure Relief Valve offered by us is manufactured using the finest grade material and cutting-edge technology. The Pressure Relief Valve we supply is precisely constructed by our skilled engineers and is acclaimed for its robustness, durability and anti-corrosive finishing. Further, we make available the Pressure Relief Valve to the clients in varied specifications at fair prices.   Proportional Pressure Relief & Flow Valve : The Proportional relief timing valve is connected by proportion relief valve and proportional valve It controls flow by inlet throttle control type to reduce system power waste Because inlet pressure follow loading pressure for small pressure difference System pressure and output flow can be proportional control quickly by input electricity signal on valve proportional solenoid
    ...more
  • 5 Way Internal Pilot Operated High Pressure Solenoid Valve

    5 Way Internal Pilot Operated High Pressure Solenoid Valve

    Get Price Quote

    • MOQ100 Piece(s)
    • Number Of FlowerSolenoid Valve
    • Brass and SS 316BRASS
    • Pressure RatingHigh Pressure
    • Operation TypeInternal Pilot Operated
    • Number Of Ways5 Way
    • Shut Off TypeBubble Tight
    • Vibration ResistanceUp To 9g
    • Speed CapabilityUp To 600 Cycles/min
    • Cycle LifeMore Than 10 Million Cycles
    • We are offering 5 way internal pilot operated high pressure solenoid valve. Features: • bubble tight shut off • mounts in any position • vibration resistance upto 9g • suitable for high speed cycling • speed upto 600 cyclemin • life more than 10 millions cycles. • manual override optionally provided wetted parts: code b2 body brass ss 316 internals brass and ss 316 ss 316 guide assembly ss 304 shadow ring none plunger,insert ss 430 spring ss 302 seat, seals nbr, viton, f silicon fasteners ss 304.
    ...more
  • High Pressure Solenoid Valve

    High Pressure Solenoid Valve

    Get Price Quote

    We are offering high pressure solenoid valve features : - body material : brass, ss 316 - diaphragm : viton, ptfe - application : fuel gas cut off - media : air, water, oil, gas, lpg, diesel - port connection : 1/4", 1/2" - pressure : up to 400 bar - life > 2 million cycles - speed up to 300 cycles / min - bubble tight shut off.
    ...more
  • Glass TFE Relief Valve

    Glass TFE Relief Valve

    Get Price Quote

    This completely new concept of relief valve seat construction provides a pressure seal of the seat to plunger. The sealing pressure increases as the inlet pressure builds up. This is accomplished by the lip on the inside diameter of the seat pressing against the side of the plunger.  
    ...more
  • Pressure Relief Valve

    Pressure Relief Valve

    Get Price Quote

    We are known as the leading manufacturer, importer, exporter and supplier of a comprehensive assortment of Pressure Relief Valve. This Pressure relief valve is manufactured from high grade as per the set market norms. The offered Pressure relief valve is accessible in different models, sizes and stipulation to meet the various requirements of the customers. In addition to this, our professionals are capable to modified this Pressure relief valve within the minimum time – frame & at affordable rates.   Features   Precise design Robust construction Optimum performance
    ...more
  • Pressure Relief Valves

    Pressure Relief Valves

    10,000 - 200,000 / No

    • Size1/2inch, 1inch, 2inch, 3/4inch, 5/6inch
    • MaterialAluminum, Bronze, Carbon Steel, Stainless Steel
    • Brand NameVARIOUS
    • TypePressure Relief Valves
    • ApplicationMechanical Industry
    • PatternPlain
    • ConditionNew
    • Pressure0-50Deg C, 100-200Deg C, 3-30 Psig, 50-100Deg C, 500 Psig, 80 Psig, High Pressure, Low Pressure, Medium Pressure, ALL RANGES AVAILABLE
    • FeatureDurable, Easy Maintenance.
    • Temperature Of MediaHigh, Low
    • Automation GradeAutomatic, Manual
    • self actuated pressure relief valve (diaphragm & spring operated).
  • Pressure Reducing Valve

    Pressure Reducing Valve

    1,800 / Piece

    • MediaWater
    • MaterialStainless Steel
    • Size6 - 24 mm
    • Body MaterialMild Steel
    • Pressure Adjusting Range1
    • Temperature Range80 - 180 Degree C
    • BonnetCF8 / CF8M
    ...more
  • Pressure Reducing Valve

    Pressure Reducing Valve

    Get Price Quote

    • DiscRenewalble Disc / Cast Carbon Steel Disc
    • Body (MOC)Bronze (Gun Metal) / Cast Carbon Steel
    • Pressure RatingPN-40 / Class-150 / Class-300
    • TypeStraight Type / Right Angle Type
    • ISI / Non-ISIISI & Non-ISI Both Available
    • End ConnectionScrewed End
    • A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.
    ...more
  • Safety Valves

    Safety Valves

    Get Price Quote

    By releasing the excess pressure Paarth Safety Valves act as best Safeguards against probable damages of equipments, vessels, pipelines and other pressure systems.   Paarth Safety Valves are useful in varieties of fluids viz. corrosive, flammable, hazardous, toxic and others   Paarth Safety Valves are designed for different pressure conditions from 1 kg/cm2 to 600 kg/cm2     Paarth Safety Valves are manufactured in many different combinations of materials like Brass, Stainless Steel, PTFE and others.
    ...more
  • Safety Valves

    Safety Valves

    Get Price Quote

    • MaterialBRASS /SS
    • Size2\" NPT, 1.5\" NPT
    • Country of OriginMade in India
    • FeaturesGenuine material used,Better service life,Resistance against corrosion
    • Usage/ApplicationFOR GAS TANKS FOR LPG, PROPANE, AMMONIA,EO, PROPYLELE AND OTHER SUCH GASES
    ...more
  • Pressure Reducing Station

    Pressure Reducing Station

    Get Price Quote

    Salient Features Immediately cracks the temperature as per process requirement. Increase latent heat of steam as steam at lower pressure has higher latent heat compare to steam at high pressure. If pressure requirement is less than 3.5 kg / cm², the PRS downstream pipe line will exempted from IBR. It allows lower mechanical strength of steam using equipment & there by reducing initial cost & radiation losses. Consist of :1. Moisture separator with trap assembly. 2. Strainer.3. Upstream, downstream & by-pass valves.4. Pressure reducing valve.5. Pressure gauge with siphon on Upstream & downstream.6.Safety valve. Salient Features Immediately cracks the temperature as per process requirement. Increase latent heat of steam as steam at lower pressure has higher latent heat compare to steam at high pressure. If pressure requirement is less than 3.5 kg / cm², the PRS downstream pipe line will exempted from IBR. It allows lower mechanical strength of steam using equipment & there by reducing initial cost & radiation losses.  
    ...more
  • Safety Relief Valves

    Safety Relief Valves

    Get Price Quote

    • Brand NameHEROSE,
    • Size1/2,
  • Thermal Relief Valve

    Thermal Relief Valve

    9,500 / Piece

    • Brand NameFlammer
    • MaterialCast Iron
    • End ConnectionFlanges
    • ApplicationIndustrial
    • Country of OriginMade in India
    • Size2 Inch
    • Pressure130 kg/cm2
    • MediaAir
    ...more
  • Brass Plug

    Brass Plug

    9 - 900 / pieces

    • MOQ50 Piece
    • MaterialBrass
    • FinishingPolished
    • ShapeRound
    • Packaging TypeMetallic Golden
    • ApplicationPipe Feetings
    • FeatureCorrosion Proof, Durable, Easy To Fit
    • Number Of FlowerBrass Plug
    • Country of OriginIndia
    ...more
    www
  • Metal End Plugs

    Metal End Plugs

    25 / Piece

    • MOQ50 Kilogram
    • MaterialMS
    • Head CodeCircle
    • TechnicsInjection
    • Min. Order QuantityAs per Requirement
    • As we take complete care of the products that we offer, we make excellent arrangements for their storage as well. Thus, there are minimal chances of damage at buyer's end. We undertake online payment procedures which are completely safe and hassle free. The online transactions are supported by advanced security features.
    ...more
  • Safety Relief Valve

    Safety Relief Valve

    Get Price Quote

    • Brand NameSafeal
    • Valve Size2 Inch
    • MaterialCast Iron
    • Country of OriginMade in India
    • Usage/ApplicationWater
    • Pressure15 Bar
    • Temperature RangeUp to 450 Degree C
    ...more
  • Safety Valve Open Discharge Type

    Safety Valve Open Discharge Type

    950 / Piece

    • MaterialGun Metal, SS304, CF8, CF8M
    • Size1/2\" to 3\"
    • ApplicationIndustrial
    • Country of OriginMade in India
    • End ConnectionBSP Threaded
    • MediaAir, Steam
    • DesignOpen Discharge
    • We offer a high-quality Safety Valve Open Discharge Type made of Gun Metal, available in sizes ranging from 1/2" to 3". Ideal for industrial applications, this valve is proudly Made in India and features BSP Threaded end connections. Suitable for air media, its open discharge design ensures efficient performance and reliability. Trust this product from our Manufacturer category for superior quality and peace of mind in your industrial operations.
    ...more
Filter by Locality
top