Cyclone Separators Dealers

Horizontal Cyclone Separator-Mana, which we make available as per the requirements of the clients are generally used for decomposing air and product. These Horizontal Cyclone Separators also find use in diverse applications due to their robust structure. We assure that this Horizontal Cyclone Separator is equipped with an aspirator with absorbed air, which decomposes the strange particles that enter into the cyclone. Applications Of Horizontal Cyclone Separator Manufacturing of ferrous and non-ferrous products Mining Chemical plants Food processing Cement manufacturing

In Cyclone Separator, dusty air is introduced to a cyclone separator through the inlet pipe located tangentially to the cylindrical portion. The mixed air, then move downwards in a whirling motion, forming a peripheral vortex and giving rise to centrifugal forces, resulting in a throwing out the dust particles towards the walls, which then move downwards into the hopper and are removed through the draw-off pipe. The air, after reaching the end of the conical portion of the Cyclone Separator change direction and move upwards towards the outlet, forming an inner vortex in this upward movement of gases against gravity, afterwards more dust particles are separated and fall into a conical hopper for subsequent removal. We provide highly durable Cyclone Separator at market leading prices. Highlights Durable Sturdy construction Highly efficient

Centifugal Seperator, Cyclone Seperator & Sand Seperator Cyclone Separators are also known as Sand Separators or Centrifugal Separators. They require a minimum operating pressure of 2 kg/cm2. This filter does not contain any moving part or any filtration media hence there is zero maintenance and no choking of filter which leads to extremely low to zero pressure drop values.    

Cyclone Separators are normally used for collecting various types of Coarsed dust particles, in which dust laden gas enters a cylindrical chamber Tangentially at one or more points and leaves through a central opening. The dust particals by virtue of its intia, will tend to move towards the outside Wall from which it led into a receiver. The Cyclone is made of sheet Steel (M.S or SS).

Essentially the function of a cyclone separator is to remove the majority of the dust and debris from the air stream that carries it. It does this by introducing the dust filled air to the cyclone chamber via an inlet mounted tangentially to the cylinder at the top. This causes the air and dust to circulate around the outside of the container, and as such centrifugal forces keeps the particulate matter to the outside edges. The cyclone profile forces the air stream and dust particles down into the conical shaped container where the cone shape creates a cyclone with higher centrifugal air speed. This higher air speeds in the cone will throw the dust particles, both large and small, off to the side and the clean air is vented out.

We are a well-reckoned Manufacturer and Supplier of Cyclone Separator in Maharashtra, India. Cyclonic separation is a method of removing particulates from the air, gas or liquid stream, without the use of filters, through vortex separation. Rotational effects and gravity are used to separate mixtures of solids and fluids. The method can also be used to separate fine droplets of liquid from a gaseous stream. Our deft professionals thoroughly examine it against the stringent quality parameters before forwarding it to our clients.

Pressure blowers provide air for Burners, Furnaces, High pressure process applications, Water treatment plants, Dairy, Ceramic plants, Textile plants and many Conveying system. Available in different arrangements and 8 discharge position to meet your needs and specification.Axial Flow FanAxial flow fans are used where large flow rates are required, but develop low pressure.ID FanAir Blowers are used to move air for various purposes: • Air conditioning• For handling hot air up to 800 ºC• Ventilation Air• Combustion Air• Fumes Exhaust • Ultra Clean RoomsMaterial of Construction: M.S / S.S / PP-FRP. Impellers are dynamically balanced to ensure quiet & vibration free operation. All Air blowers manufactured by us have sturdy construction. material of construction • m.s • stainless steel - 304 / 316 / 310 • m.s with FRP lining • m.s with P.U paint Available types: • Belt driven• Directly coupled to motor• Impeller mounted directly on motor shaft.Maximum volume & pressure: 75000 M 3/Hr & 3000 mm WG. Blowers are also offered in double stage construction , which are mainly used for Oil combustion purpose.Pressures offered in such blowers go up to 60 " WG & motor h.p is up to 100 H.P Bearings are chosen according to blower running RPM & motor H.P and are suitable for long running life. 

Cyclone Separator is used to extract unwanted particles from air or other fluid. The Cyclone Separator, we deal in, is used in industries like sugar industry, petrochemical, pharmaceutical to separate dirt using vacuum pressure. We can make available the high performance Cyclone Separator in varied sizes and capacities. And the ability to come up with options makes us a renowned name as Cyclone Separator Manufacturer, Exporter and Supplier from the country.