BaseWater base epoxy nano modified self level floor coating
Pot life30 - 40 minutes
VOCNIL
SolventNIL
Touch Dry4-6 hrs
Full Cure6-7 days
Coverage1 Sq.m. per Kg per Mm Thickness
Smac Epotop Slf Water Absed Epoxy Self Level Flooring, Nano Technology Based Concrete Penetrating sealer, SMAC Elastobond Pu Water Based Anticorrosive Coating, Inorganic Concrete Penetrant and Water Repellant, SMACSIL-IW, SMAC RCCP-200(Oil Base Rust Converetercum Finish Paint).SMAC® EPOTOP SLF is a two component water based Epoxy Self Level Flooring System. It forms a tough, hard, joint-less mirror like finish. It gives a seamless, dustproof and easy to clean hygienic surface which is resistant to many mild chemicals, oils and water.Advantages :
Eco-friendly, being water based composition.
Excellent self leveling properties
Breathable.
Can be applied on fresh as well as old concrete.
Excellent abrasion resistance.
Excellent scratch resistance.
Resistance to chemicals, oil and water.
Creates joint-less, easy to clean surface.
Dust proof and mirror like finish.
Application Areas :
Light duty industrial floors
Pharmaceutical industry
Food & Dairy plant flooring
Non-skid flooring
Hospital floors
Engineering & automobile industry shop floors
Mixing Ratio : 82 part Resin : 18 part HardenerMethod Of Applications : Notched Trowel and spiked rollerApplication Procedure :
While applying SMACC EPOTOP SLF layer, surface preparation is the most important part. Remove all the loose materials to expose the base surface. Wash the surface with plenty of water. A 10% muriatic acid solution wash should follow.
Again wash the surface with plenty of water. Fill all the cracks, honey-combs, voids etc using cement mortar or our BONDCRETE RP fast repair compound.
Let the surface dry completely. Apply a coat of SMAC' EPOPRIME liberally by brush over the surface. Allow the surface to be touch-dry. Mix the resin Et hardener parts of SMAC EPOTOP SLF thoroughly, to get a uniform consistency. Remove any lumps. Apply the SMAC EPOTOP SLF layer over this primer coat by a notched trowel and spiked roller. Allow the layer to cure for 24 hours, after which the treatment is suitable for foot traffic. Protect the treatment during the curing period from mechanical disturbances, water splashes, direct sunlight Et heat. Full cure time is 7days from installation on the substrate.
Application thickness can be form 0.5 mm to 3 mm depending upon functional requirements.solution wash should follow. Again wash the surface with plenty of water. Fill all the cracks, honey-combs, voids etc using cement mortar or our BONDCRETE RP fast repair compound. Let the surface dry completely. Apply a coat of SMAC' EPOPRIME liberally by brush over the surface. Allow the surface to be touch-dry. Mix the resin Et hardener parts of SMAC EPOTOP SLF thoroughly, to get a uniform consistency. Remove any lumps.
Apply the SMAC EPOTOP SLF layer over this primer coat by a notched trowel and spiked roller. Allow the layer to cure for 24 hours, after which the treatment is suitable for foot traffic. Protect the treatment during the curing period from mechanical disturbances, water splashes, direct sunlight Et heat. Full cure time is 7days from installation on the substrate. Application thickness can be form 0.5 mm to 3 mm depending upon functional requirements.
Post Free Ad
