Concrete Coring Machine Dealers

Core Cutting or Core Drilling Machine (Motorised)     Suitable to Cut / Drill cores of Concrete, Rocks, Stones, Tiles or the similar material. The machine is suitable for care samples of size upto 150mm diameter with the help of thin walled Diamond Bits which are at extra cost. The machine has sturdy base with pillar support in which rack & pinion is provided for adjustment in height and penetration assembly. The leveling screws are at the base. For gripping the damply in positions suitable grips are provided. A suitable electric motor, standard make is fitted in the machine with cooling arrangement with water. The base frame is also fitted with wheels for ease of transportation.Dimension approx. are as under :Height : 1300mmBase : 600 x 1200mmHead travel on rack : 350mmDrill Speeds : 900 RPM for soft samples and 350RPM for hard samples.Water Swivel : Built in the machines.Suitable for 230 volts AC, single phaseAccessories : 1. Thin wall diamond bits 2. Core Barrel.

Core Case (AIM 368)   Core Case is the first innovation in Concrete core drilling. Connected to the core drill assembly with a flexible rubber coupling, the heavy duty, hand held, rotary drill easily produces cores upto 100 mm   Application Sample Collection Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Irrigation Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

 .         6inch bit capacity ·         Weighs only b 45 pounds ·         50Hz, 220v, 3500w ·         Single Speed-700 RPM ·         Very durable and reliable ·         Diamond drill with water source ·         Spring loaded slide handle for easy coring ·         Convenient carrying handle on carriage

Product Code: EKE 368 It comprises: Percussion Hand Drill, 700 Watts capacity 1 No.Feed Assembly including screw and shaft 1 No.Anchor Bolts and Clamping Pliers 1 Set Core Case is the first innovation in Concrete core drilling. Connected to the core drill assembly with a flexible rubber coupling, the heavy duty, hand held, rotary drill easily produces cores upto 100 mm in dia without the use of cumbersome frameand feed. The Water Jacket surrounding the core barrel is flanged, enabling it to be clamped to the surface to be drilled. For added support, clamping pliers and anchors are supplied. A rubber O-Ring fitted with the flange seals the water jacket core barrel assembly against concrete surface, enabling the return flushing water containing the cuttings to be hosed away from the drill site. Water is fed into the upper water jacket nipple, from there the water flows, through a manifold, into the drill spindle and continues to the inside of the diamond core bit. A steady feed pressure can be maintained on the drill bit by turning the capstan wheel with one hand, while holding the electric drill steady on the coupling with the other. The drill feed assembly, common to all models, makes the systemadaptable to all core diameters with additional conversion kit. Core Case is a completely portable, self-contained system, easily carried by a person in a standard brief case. EKE 36801 Core Bit and Water Jacket, 25 mm dia x 75 mm long EKE 36802 Core Bit and Water Jacket, 3B mm dia x 100 mm longEKE 36803 Core Bit and Water Jacket, 50 mm dia x 100 mm longEKE 36804 Core Bit and Water Jacket, 75 mm dia x 100 mm longEKE 36805 Core Bit and Water Jacket, 100 mm dia x 100 mm longEKE 36810 Core Bit 50 mm dia x 200 mm longEKE 36811 Core Bit 75 mm dia x 200 mm longEKE 36812 Core Bit 100 mm dia x 200 mm long CAUTION Coring cannot be done if encountered by reinforcement steel, hence to be avoided. 2. Core bits larger than 50mm dia may be avoided if concrete with strength M60 is encountered, as this may overload the motor and damage the bit.  

Decades of experience in the production and application of core drill bit, rigs and motors give Fastcut the edge in the marketplace. As a result our products can be viewed as innovative solutions for large-scale projects while remaining cost-effective for everyday construction site use. Fastcut core drills are especially suited for drilling reinforced or normal concrete. Can be operated on a drill rig or by hand. Fastcut core drill bits and drills are designed to work flawlessly.  

At the initial stages of using raw material for the production, our dedicated quality staff makes certain that the inputs used are of premium quality. Thus, our offered range is highly appreciated for the quality. Keeping pace with the contemporary market trends, we ensure on-time and safe delivery of the orders.

We offer Mini Core Drill. The comprehensive range of Mini Core Drill offered by us finds application in water wells, mineral exploration, core drilling, and reverse circulation. Manufactured as per the set industry norms, these drills are known for their high functionality. These are necessary for the speedy and effective work as the drill is powered by Perkins diesel engines.

We are a respected name from Maharashtra(India) and involved in catering to the varied demands of the customers. We own a well-constructed storage space that helps in keeping the batch under secured conditions and away from various spoiling factors such as sunlight, water, moisture, dust, rain and others.

• Heavy duty, pillar type frame with 1500W. • Varying cutting feeds provided with water-fed swivel head which can be connected to suitable water supply. • Provision at base for water collection I drainage. • Core preparation from regular and irregular samples Core size : EX to 100mm. • Clamping arrangement to hold specimens with regular irregular shapes to the base of machine. • Two cutting speeds at no load 95021 OORPM. • Water tank 51tr. is Standard outfit. Suitable for operation on 220 V, one phase, AC supply.