Pressure Controllers Dealers

Marsh Bellofram Type 3510 single and Type 3520 double loop electro-pneumatic servo pressure controllers combine the advantages of reliable solenoid valves and digital control, housed in a rugged, weatherproof enclosure. Available with a local keypad programming option or RS-485 digital communications for PLC or PC control, these precision controllers allow the user the ability to set and extract data directly from the transducer with a PC or automation system, making for some of the most precise, accurate, and reliable devices available on the market. With a forward flow of 1.25 SCFM at 100 psi, Types 3510 and 3520 can be used alone for many applications or combined with a volume booster for flows in excess of 2,000 SCFM. Various pressure output ranges are available from 29″ Hg vacuum to 600 psig. Standard accuracy is ±0.5% full scale or better. Enhanced accuracy version is ±0.25% full scale or better. A four-digit display of the output pressure is available with the keypad model.

The product can substitute the parts in automatic water pump with complex structure controlled by traditional machinery switch (Such as pressure gauge, pressure switch, T - valve, check valve and pressure tank). It is featured with steady performance, low maintenance cost, long service life and convenient installation. When the green “Power on” power supply indicator light flashes, it means the power supply is connected. When the yellow “Pump on” light flashes, it means the water pump has been started. When the water pump continuously runs, the pressure in pipeline system will rise and when the required pressure of the equipment is reached for several seconds, the water pump stops working. In case this process can not make the pressure in pipeline reach the required pressure of the equipment, the red light “Failure” will flash. Under this situation, press “Restart” button and keep it, and wait for the pressure in pipeline reaching the required pressure of the equipment, then the red light will be off. Release the button and close the water tap. The product stays in normal standby state and keeps the pipeline system in water supply state with a constant pressure.

Aerosense differential pressure controller it is recommended that industrialists dealing in the domain of pressure control & temperature drift should make the selection of the all new range of aerosense differential pressure controller. The device is a type of differential pressure indicator that comes with advanced & standard accessory items. It is also enabled with the zero point adjustment facility and high point adjustment (span) that is provided to deliver the excellent results as per the desired levels of quality in hvac, fan & blower industries. Features: better accuracy highest pressure range protection standard conformance

The Pressure Controllers, we make available, are used in oil, sugar and chemical industries. We procure the Pressure Controllers from well-known sources that resort good production practices. We are capable of handling medium as well as bulk orders of buyers as we have maintained a huge stock of Pressure Controllers in our spacious warehouse. Besides, we quote nominal prices. From Maharashtra (India), we are the renowned Exporter and Supplier of Pressure Controller.     Features : Controller can be changed from Direct to Reverse action or vice-versa by simple repositioning nozzle block and reversing Bellow connections. Universal case-mounting provide with the controller helps the mounting to be done on valve panel or on the yoke of a Control Valve. The case is weather-poof and even suitable for field installations. Applications : Oil, Chemical and Sugar Industry.

We have available following Ships spareparts for Sale: Product-Pressure Controller Product-Nakakita Seisakusho Type-NS-PS-732 Sr no-32K410 Date-23-3-82 If any requirement then please contact us on +91 97279 70078. 

Product Details:   Efficient electronic pressure control for closed volumes   Eliminate costly outgassing through continuous bleed valves. Alicat Scientific electronic pressure controllers provide responsive, stable control of absolute, gauge or differential pressures in dead-ended processes. Differential pressure controllers maintain the pressure differential between two points in a process using separate dead-ended pressure sense ports. The PCD3 Series incorporates a remote sense port that allows a pressure signal to be sent from a point upstream or downstream of the controller.   Making You Faster   50-100 ms speed of response stills upstream fluctuations. Accessible PID valve tuning for best speed and stability. Custom valve orifice sizing yields full-range stability. PCD3-series remote pressure sense port allows flexible controller placement.

Product Details: Valve mounted, Compact and simple pressure control system Output air pressure upto 3 Kg/Cm2 hence valve positioner not required Can be used directly for pressure reduction or as overflow system. No additional instruments required Totally mechanical, very easy to maintain in-house No electronics, hence not affected by ambient temperature All materials includes sensing bellow are cast AL and SS hence corrosion resistant Can be used with any control valves with any Pneumatic Actuator Very little air consumption

Aerosense Differential Pressure Controller  It is recommended that industrialists dealing in the domain of pressure control & temperature drift should make the selection of the all new range of Aerosense Differential Pressure Controller. The device is a type of differential pressure indicator that comes with advanced & standard accessory items. It is also enabled with the zero point adjustment facility and high point adjustment (span) that is provided to deliver the excellent results as per the desired levels of quality in HVAC, fan & blower industries.Features: Better accuracy Highest pressure range

Features Part of Beamex Integrated Calibration Solution or a stand-alone pressure controller Automatic pressure calibrations Portable or bench mounted Output range: from vacuum to 70 bar (1015 psi) Precision: < 0.015 % FS 1 year uncertainty: < 0.025 % FS Supported user interface languages: English, German, French, Spanish, Italian, Chinese, Russian, Japanese, Polish, Portugese, Korean

GDS Instruments Pressure Volume Controllers are general-purpose water pressure source and volume change gauges for the precise regulation and measurement of fluid pressure and volume change. Pressure applications from 0 up to 100MPa of wateroilair, with accurate measurement of volume change, all of which are capable of being logged and controlled by PC. The Enterprise Level PressureVolume Controller (ELDPC) is aimed at commercial testing (max 1MPa). The Standard PressureVolume Controller (STDDPC) is aimed at medium pressure commercial testing (

• Pressure ranges from vacuum to 3,000 psi (200 bar) • Precision model accuracy of 0.005%RD + 0.005%FS • Standard model accuracy of 0.02%FS • HART Communication and Profibus PA (only 780) • Control stability of 0.003%FS • Easy-to-use icon based user interface