Computerized Tensile Testing Machine Dealers

The machines are suitable for studying mechanical behavior of various materials like iron and metals, rubbers, plastics, ceramics, fabrics, composites, cables and wires. As a matter of fact, it is an indispensable instrument for the modern industries. Two options are available mainly acme threaded screw with DC motor drive and ball lead screw with servo drive. The machines confirm to IS, BS & ASTM standards

The company is ranked amidst the notable Manufacturer, Exporter and Supplier of Computerized Tensile Testing Machine. Our Computerized Tensile Testing Machine is high on quality and is highly efficient in its performance. Our Computerized Tensile Testing Machine has a microprocessor based electronic panel. For displaying various load and extension readings, the Computerized Tensile Testing Machine is attached with computer having Microsoft Windows based operating system and a LCD monitor. We offer the best deal to purchase our Computerized Tensile Testing Machine.

1)    Computerized Tensile Testing Machine having LCD Display unit which shows Load , Elongation,  Last samples Maximum Load, Elongation at the time of auto reverse. Controller can save  last 5 samples readings  .2)    Tensile, Comprassive, Flexural, Shear, Bend, Bond, peel ,etc test can be carried out without making any change in the panel.3)    Speed variation through AC/DC Variable Drive , Stepper & Servo Control  4)    The accuracy of the machine is within its tolerance limit of + or – 1%.5)    Force Measurement will be available  in Kg ,Newton, KN & MPA.6)    Elongation through Encoader  for high accuracy .7)    Auto Reverse  & Auto Break facility.8)    Over load & over travel facility  are provided in controller.9)    Computer Connection Through 9 pin serial Port( RS 232)10)    Over load  & Over Travel safety also provided.11)    Speed Control through software programme.12)    Software can calculate the results as per below:-  •    Maximum Load•    Elongation at maximum load•    Elongation percentage at maximum Load•    Tensile Strength at maximum Load•    Break load•    Elongation at Break Load•    Elongation percentage at break load•    Tensile strength at break load•    Yield Load•    Elongation at Yield Load•    Elongation percentage at Yield load•    Tensile strength at Yield load•    Modulus of Elasticity1.    You can see results in  any  unit  KG/cm2, KG/mm2, N/cm2, N/mm2, KN/cm2, KN/mm2 & MPA. Software will calculate all the data as per the unit selection.

Tensile Testing Machines are used to conduct following Tests : Our Range of Products Please download Java(tm). • Tensile Test on Metals, springs,Rubber, Synthetic Materials etc. • Compression Tests on Springs,Rubber etc. • BendingTransverse Test on Synthetic Materials etc.

computerized tensile testing machine, the most popular product of our offered range of products is embellished with following technicalities that help in apt functioning in various industrial applications. latest windows based, users friendly, accurate, menu driven softwarefully automatic, on screen calculations based on the delivered dataautomatic data capture, storage & graphic displayrecording, storage & retrieval of results & detailsbuild in facility for printing of test results and the graphload measurement by load cellover load & over travel safetyon line display of load, elongation & graphtare load & reset elongation facilities availableselectable units like n, kn, kgf, lbf, inch, mm, etcfully automatic on screen calculations like uts, ys, proof stress, etcelectronic extensometer (optional) is available for proof stress evaluationit is possible to use a number of load cells, say two or three, to cover much wider range of load, to suit the application. cost of one load cell is included in the price, but additional load cell will be at extra coststandard load resolution is with 10,000 counts. finer resolution (optional) with 20,000 counts can also be offered at extra cost. standard displacement resolution is 0.1 mmtypes of tests, testing materials, grips, attachments, fixtures, straining speed as like analogue version, model : tkgvarious models – maximum capacity from 200 n to 50 knloading accuracy well within ±1%, conforms to is:1828 / bs:1610

We offer premium quality Horizontal Chain Rope Testing Machines that is made keeping in mind the needs of the customers. It is made by the use of advanced technology that ensures its better functioning. Model : Mech.CS.CR Features : Real time graph & data processing with wide range of data entry owing to fully customized windows XP based softwareMotor driven gear shaft for quick and effortless adjustment of test length to facilitate rapid fixing of test specimen High reading accuracy due to large size of dial.Easy operation due to simple controlsRobust straining frame ensures extremely rigid constructionSafely devices for safe operationThe Horizontal Chain and Rope Tensile Testing Machine incorporate design features to enable high accuracy testing with economy, speed and versatility.Loading accuracy:+/- 1 %Fully automatic load & displacement digital panelWide range of standard and special accessories, including load stabilizer.Large effective bed clearance enables testing of a wide range of specimens. PRINCIPLE OF OPERATION : The machine operates by hydraulic transmission of load from the test specimen to a separately housed load indicator. The ones which are prone to wear and damage due to shock on rupture of test pieces are replaced by the transmission of load through levers and knife-edges. Hydrostatically lubricated piston applies the load. A main cylinder pressure is transmitted in the control panel to the pressure cell housed that directly converts pressure into load. KN shows absolute load applied on the test specimen digitally and rotary encoder shows displacement to display load in electronic panel. Machine Consists of : Straining unitControl panelPower PackHydraulics ControlsLoad Displacement Indicator System Special Accessories : Load stabilizerExtra long framesWide range of accessories offered on request at additional cost Click Here For More Detail

Machines are designed to test chains, wire ropes & any long specimens for proof test or destructive tensile test. High loading accuracy & infinitely variable straining speeds to suit a wide range of materials. Continuous roll autographic recorder to get load - elongation graph. Robust loading frame, Simple controls & easy to operate. Adequate safety devices for safe operation. Analogue models with large dial & load measurement by pendulum dynamometer principle. Digital / Computerized models are also available where load Vs elongation is in digital display & printout of results can be taken. Special Accessories like - Extra Bed length, Extra Ram stroke, Various special grips / attachments / fixtures as per sizes / shapes of specimens, Load-stabilizer (at extra cost) can be provided to suit special application. Various Models - Maximum Capacity from 100 kN to 3000 kN. Loading accuracy well within ±1%, conforms to IS:1828 / BS:1610.

Automatic Data capture, storage & graphic display. Recording, storage & retrieval of results & details. On line display of load & extension. Fully automatic, on screen calculations based on the delivered data. Out put to digital printer of test data, test results & graphs. Auto detection of over load, over travel & specimen break, on detection of the above conditions, the machine is automatically switched off. Load resolution - 0.01% of machine capacity for entire range. Accurate and Users friendly software & all other facilities mentioned under Model : TUN.

The Presto Computerized Tensile testing machine is widely used for evaluating the tensile strength of plastic products, pet bottles and various other products. It is a floor standing model of C.R.E. Type fabricated using heavy duty Mild steel. The equipment provides an accurate cross head speed between 50mm and 500mm min. and is powered by a Servo Motor, which can be run at variable speed. A graphic user interface PC has been incorporated to provide accurate speed control. The Presto Computerized Tensile testing machine comes complete with a calibration certificate traceable to NABL approved labs. Automatic Load Sensor Sensing is conducted by the machine through Advance electronics. The equipment has been fitted with an Over Load Travel Safety device which has an Auto stop facility controlled through special software In-built Advanced Micro – controller systems have also been incorporated to ensure accuracy and reliability of results. The machine also has a tensile card – 1927 or 945a, 16 bit ADC & DAC. It is mandatory for the user to install a Computer and Printer (Pentium or Higher version is not part of the offer).

Wide range of standard and special accessories including load stabilizer. Various models - Max. capacity ranging from 100kN to 3000kN. Loading accuracy well within ± 1%. Also available - Electronic model CRE, Computerised model.

The machine is having 2 frames and one frame is used for Tensile Test and Compression and other frame is exclusively designed for bend test on insulators, Special window based software is provided to meet the special test conditions. The on-line graph, data acquisition, storage and calculations etc, We have supplied Special Computerized Spring Testing Machine for checking deflection of leaf springs to , We have developed Microprocessor based panels for Rockwell and Balancing Machines. We have developed Portable Dynamic Hardness Tester Model:DHT-6 which is lighter in weight, easy to operate, and the machine is first of its kind in India.

MAIN FEATURES   Variable speed drive with DC/Servo drive options. Provision for automatic identificatin & thereby interchangeability of load cells. Provision of different clamping devices to suit specific test requirement. Safely interlock by enf limit switches & by overload sensing. Load Cells - Universal load cells of following capacities. 50N, 100N, 250N, 500N, 1kN, 10kN, 25kN, 50kN, 100kN, Any other load cell can be offered on requirement. Extensometers with Electronic Interface & Evaluation Software .M-2 Stain gauge type with 2mm extension and guage length 25mm & 50 mm. It measures important parameter like 0.1%, 0.2% proof stress and usable upto dia/flat 40 mm Long travel Extensometer for rubber test.offers following extensometers with electronic interface & evaluation software .M-2 Stain gauge type with 2mm extension and guage length 25mm & 50 mm. It measures important parameter like 0.1%, 0.2% proof stress and usable upto dia/flat 40 mm Long travel Extensometer for rubber test. Measuring System Option -1 Measuring System MP - Microprocessor based system with digital display of load and displacement / extension it is having membrane keyboard for entering necessary input data and for reading results, Printout of Load v/s. Displacement or Stress v/s. Strain is available as standard feature. Option 2 - Measuring System PC - It is PC based card system where two PCB's are directly fitted into PC slot, Load & Displacement are shown on computer screen, Input data is feed by means of computer keyboard. Test is automatically completed & test result are displayed on computer screen.   Salient Features   Maximum Test load - 5 kN, 10 kN, 20 kN, 50 kN, 100 kN Load Measurement - By means of exchangeable strain gauge based load cell Load Measuring Range and Accuracy- ± 1 % on indicated load from 2 % to 100% of load capacity Maximum Crosshead Stroke-1000 mm without load cell & grips Distance between Columns-450 mm Drive System Option - DD with DC drive - 1:10 speed ratio 5 - 50 mm / min, 25 -250 mm / min, 50- 500 mm / min (Any other speed range available on request) Drive System Option - SD with servo drive - 0.5 mm to 500 mm/min (Any other speed range available on request) Power Supply - 230 V AC / 50Hz, 1 Ph for 5, 10 & 20 KN 415 V AC / 50Hz, 3 Ph for 50& 100KN Option -1 Measuring System MP Panel Crosshead Display Resolution - 0.1 mm by means of rotary encoder Load range & Resolution - 1 / 10000 from 0 - 40 % of range and 1 / 4000 from 40- 100% of range Option - 0.1mm crosshead Dis. Resolution (0.01 Optional) / Serial Software. Option 2 - Measuring System PC Crosshead Display Resolution - 0.1 mm by means of rotary encoder Load range & Resolution - + 1 / 25000 Single range.  

Product Details : Accuracy -  +/- 1% Material for Construction -  Stainless steel Features of Digital Tensile Testing Machine : Fully digital Durability Low maintenance Robustness Suitable for testing following material : Composite and rigid plastic Paper Films Rubber Textile products

Capacity 0.5 kN - 60 kN Mechanical, Electronic & Computerized versions available Useful for testing various materials like metals, springs, rubber, polymers, etc. Customized holding fixtures available

backed by a competent team of professionals, we are engaged in the production and distribution of horizontal chain testing machine. The horizontal chain testing machine, provided by us, is loaded with advanced features and offers highly accurate and reliable testing results. The horizontal chain testing machines are offered in varied specifications by us to meet the diverse clientele requirements. The clients can avail the horizontal chain testing machine from us at highly affordable price. specifications staining at variable speeds to suit wide range of materialsmotor driven gear shafts for quick and effortless adjustment of test length to facilitate rapid fixing of test specimen

Seco manufacturer of 1n to 2,000n computerized tensile testing machine as per is, bs, astm, iso, din, jsi, rdso, aahso, world standard specification maintain. capacity 1n to 1,000n least count 0.0001 to 1 working space 1000 mm. 800mm lest count 0.1 mm. test speed rang 1 to 500 rpm. accuracy 0.001% control computerised. (i) load in kn. (ii) extension in mm. (iii) speed in rpm. standard test tension test compression test flexural test peel test computer system load v s mm graph standard specification ficher. auto stop specimens break. 220 v a.c., 1 ph, 50 hz. power 440 v a.c., 3 ph, 50 hz. standard accessories against inquiry specification well be given against specified inquiry.

The computerized tensile testing machine with COF is a testing instrument that is used for testing the coefficient of friction of packaging materials. This is done to determine the ease of moving or sliding the packaging material. This instrument is a combination of a computerized tensile testing machine and coefficient of friction tester hence give the most accurate measurement of coefficient of friction for a material or a surface. Presto offers an extremely accurate model of this instrument to cater the quality testing requirements of a variety of industries.