Electrodes Dealers in Secunderabad

• Country of Origin: India
• Material: Electro Galvanized
• Certification: ISI Certified
• Technique: Hot Rolled
• Surface Finishing: Polished
• Application: Industrial
• Color: Grey

• Operating Current: AC 
• Length: 350 mm,450 mm
• Material: Mild Steel,Stainless Steel
• Features: Precisely-designed, Easy to install, Sturdy construction .
• Brand: ESAB,Ador
• Size: 4.0MM, 2.5 mm, 3.15 mm, 5 mm

• Material: Galvanized Iron
• Shape: Round
• Certification: ISI Certified
• Application: Industrial
• Surface Treatment: Coated
• Outer Diameter: 50 mm and 80 mm
• Feature: Durable, Fine Finished, Perfect Shape, Rust Proof

Details : Galvanized for corrosion protection Designed for fast fault current Dissipation Low Maintenance earthing system Easy & fast installation on site   Objectives of earthing Provide an alternative path tor the fault current to flow so that it will not endanger man or machine.   Ensure that all exposed conductive parts do not reach a dangerous potential.I\/laintain the voltage at any part of an electrical system at a known value so as to prevent over current or excessive voltage developing in the machinery.   End Result Human safety Protect equipment Electrostatic discharge   What ls Earthing The primary purpose of earthing is to reduce the risk of serious electric shock from current leaking into uninsulated metal parts of an appliance, power tool, or other electrical devices. In a properly earthed system, such leaking/fault current is carried away harmlessly while tripping the fuse. Earthing also provides protection from large electrical disturbances like lightning strikes and power surges. It also aids in the dissipation of hazardous static electrical charges.   Although most electrical systems have fuses or circuit breakers for protection against a fault current, the human body may be fatally electrocuted by a current of less than one ampere which is well below the point at which a fuse or breaker will operate. Earthing helps minimize such hazards from occurring.   Over the years, billions of dollars worth of property has been destroyed due to electrical failures, short circuits etc causing fires, electrocutions and other mishaps. But more importantly, lives were lost.   This makes earthing of crucial importance everywhere electricity is used.   Installation Method It is very important that Ashlok earthing systems are installed correctly for system to work safely, to get maximum benefit & advantage. Upon proper installation. the earthing system exhibits low earth resistance value compared to conventional earthing system in a given soil conditions. Please notethatASHLOk earthing system once installed needs very little or negligible maintenance, however, pouring of few bucket of waters in side and around the earth pits is recommended in poorsoil conditions, It is to be understood thatearth resistance value of any earthing system varies from place to place since soils are hardly homogeneous in nature and exhibits different & varying soil resistivity even in close proximity. in such cases, use of multiple earth pits in grid formation is recommended to get the desired earth resistance value.   Note: Since there exist varying types ofsoil & environment conditions around the world, the best resistance values for an earthing system vary.   Normal Soil Make a bore of 8” to 10" in dia up to the electrode length of 2/3 meters. Fill the bottom 4" of the bore with the supplied BFC (Electrodite). Vertically, place the electrode in the centre of the pit. Fill the cavityaround theelectrodewith the BFC(E|ectrodite). Ensure there are no air gaps in the BFC filled cavity region. Now pour sufficient water into the earth pit until the BFC takes theform of a paste/mud. Allow the pit toabsorb thewaterand settle, Test the earth pit and makethe required connectionsto theelectrical service box   Caution: Avoid excess watering and do NOT hammerthe electrode.

• Type: Flange Type, Clamp Type,  Plain and Drilled
• Material Of Construction: Copper
• Sizes Available: 25NB to 250NB
• Length and Thickness: As per Boards Standard and  any Custom Requirement

  Cu Bonded Steel Rods (UL Approved) Copper bonded steel rod is M.S. Rod with first layer of nickel coating and then a copper Coating of 250 microns using electrolytic process. This Ground Rod possesses the strength of steel and conductivity of copper it has long life of more than 35 years as commercial GI pipe used for earthing. 5/8” Dia , 10 Feet Long , Molecular Cu coating > 250 micron 5/8” Dia , 5 Feet Long , Molecular Cu coating > 250 micron 3/4” Dia , 10 Feet Long , Molecular Cu coating > 250 micron 3/4” Dia , 6 Feet Long , Molecular Cu coating > 250 micron

• Features: High tensile strength, Easy installation, Anti corrosive

• Material: HDPE
• Brand Name: Tirupati
• Length: 3m
• Thickness: 3 mm
• Country of Origin: Made in India
• Operating Temp: 90 Deg C

• Length: 300-500 mm
• Material: Stainless Steel
• Size: 2.5 mm
• Pieces Per Box: 100
• Packaging Type: Box
• Usage/Application: Welding the stainless steel structure

• Type: Integral Drill Rod
• Material: Alloy Steel, Aluminium, Austenitic Steel, Carbon Steel, Iron, Mild Steel, Stainless Steel, Steel
• Shape: Round
• Length: 1-1000mm, 1000-2000mm
• Application: Construction, Manufacturing Unit, Marine Applications, Water Treatment Plant
• Color: Black, Brown, Grey, Silver
• Finishing: Non Poilshed, Polished
• Dimension: 10-100mm
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing, High Strength

• Feature: Strong construction, Fine finish, Easy and safe to use

Copper Welding Rod, Copper Flexible Connector, Aluminum Wir

These are Specially formulated maintenance purpose welding electrode (MMAW) to ensure enhancement of working performance with minimum heat input. Designed for requirement of reconditioning of various industrial components.

We are well known for exporting of wide variety of Saw Welding Wire

Electrodes, Non-Ferrous Metals, Zinc Ash, Zinc Dros

Welding Electrodes, Cut Off Wheels, Electronic Weighing Machin

Cutting Rods, Mild Steel Bright Bars, Metal VSP RINL Round Bars, EN8 Round

Ador Welding Electrodes, Gas Cutting Accessorie

Welding Electrodes, Welding Machines, Welding Rod