Moisture Separator Dealers

Forbes Marshall moisture separators effectively remove the moisture from steam ensuring the highest dryness fraction at the outlet. These moisture separators are available with IBR test certifications if required.

We are offering moisture separator. Fixed vortex generator (for improved water removal by centrifugal and impingement sepetation) compact lightweight housing (12" to 4" sizes available) vortex arrestor (prevents re-entrainment of seperated water ms 100 ms 365) automatic drain (discharges seperated water) sight glass (gives visual check of water collection and drain function).

The compressed air coming out from an After Cooler, contains large quantities of water vapour condensed as a result of cooling of the compressed air. If this is not removed, much of it will be carried to the distribution system and cause extensive damage to all the equipment and processes, which use the air.Apart from water vapour, there is also an appreciable quantity of oil vapour that is formed due to heat and pressure carried along with the air stream is also removed by the separator. Wet steam is steam containing a degree of water, and is one of the main concerns in any steam system. It can reduce plant productivity and product quality, and can cause damage to most items of plant and equipment. Whilst careful drainage and trapping can remove most of the water, it will not deal with the water droplets suspended in the steam. To remove these suspended water droplets, separators are installed in steam pipelines. The steam produced in a boiler designed to generate saturated steam is inherently wet. Although the dryness fraction will vary according to the type of boiler, most shell type steam boilers will produce steam with a dryness fraction of between 95 and 98%. The water content of the steam produced by the boiler is further increased if priming and carryover occur. There is always a certain degree of heat loss from the distribution pipe, which causes steam to condense. The condensed water molecules will eventually gravitate towards the bottom of the pipe forming a film of water. Steam flowing over this water can raise ripples that can build up into waves. The tips of the waves tend to break off, throwing droplets of condensate into the steam flow.

We are instrumental in offering a quality range of Air Compressor Moisture Separator. The offered range is utilized in different fronts like CNC machine shops, sugar mills, paper mills, rice mills, food processing units and cement factories. Along with this, the offered range is admired by the esteemed patrons, owing to its durable nature, abrasion resistant, corrosion resistant finish and longer service life. This range is customized as per the demands of the customers. Features: Corrosion resistance Easy usage Requires less maintenance

Description: IndoAnushka make Moisture separator with drain module is a value added solution for removal of moisture from the steam headers. Moisture separator with drain module consists of M.S. fabricated moisture separator with completely assembled drain assembly consisting of ball float steam trap, IndoAnushka make MAINTENO strainer with inbuilt blowdown valve and IndoAnushka make MULTIVIEW double window sight glass with deflector and 1 no. Isolating valve completely assembled with interconnecting piping and 1 no. Outlet nozzle as provision for bypass. Available Sizes: 15NB ONWARDS upto 300NB. Pipe Connections: ANSI 150, 300 & 600. BS-10 Table-H, J & K Limiting Conditions: For Moisture Seperator – Max. working pressure and temperature as per flange ratings. For Drain module – Max working pressure-13bars, Max working temp – 180 OC. Materials : Body & Baffles – M.S. Fabricated Trap – C.I with ss internals Strainer – CI with ss internals Multiview- M.S Fabricated Valves – CI 

Based in Karnataka, India, we are actively functioning as a capable Manufacturer, Supplier and Exporter of Moisture Separator in every nook and corner of the world. The Moisture Separator that we deal in is available with us in nine different sizes. Plus, the Separator comes with efficient centrifugal moisture separation. One can acquire it from us in bulk orders and at the competitive rates. Rely on us!

Hot compressed air coming from Air Compressor cannot be used directly in most applications. It is therefore cooled to a temp of around 40o C, which is done in the Aftercooler   This is a shell & tube type Heat Exchanger where compressed air in the shell is cooled by plant cooling water circulating in the. tubes. The liquids which condensed due to cooling are separated by the in- built Moisture Separator. Draining can be done manually or by Auto Drain Valve.

  Get Rid of moisture Problem & Save Energy Upto 5 %     The actual pressure drop across After cooler is always high i.e. 0.5 kg/cm2 which means compressor has to compress 0.5 kg/cm2 more to deliver required pressure. This causes increase in Shaft Horse power by 3%. We design customised after coolers for your compressor so that pressure drop is less than 0.1 kg/cm2. This stright way gives saving of 3% and simple pay back on your investment is less than one year. The Moisture separators supplied by compressor manufacturers are low cost baffle type design. These are ineffective and causes more pressure drops. Moisture gets carried over to Air Dryer or to the plant.   This ultimately results in more power consumption for air dryer plant and more breakdowns of pneumatic tools due to moisture problem and hence more maintenance cost. Our centrifugal moisture separators are designed for very low pressure drop i.e.120 mm 0 WC (0.01 kg/cm2) and maximum moisture separation due to whirling action which removes up to 90 % of the moisture before air reaches to air dryer or plant.  

Delair Moisture Separator are designed for the removal of bulk water and oil from compressed air streams. Wide range of 15 standard models with capacities from 50 m3/hr to 6,000 M3 / HR. Higher capacities available on request Compact design Moisture separator in accordance with international design code like-ASME, IS-2825, etc. Instrumentation such as manual drain valve etc. moisture separators Duly tested pneumatically & hydrostatically Available in baffle type, if required demister pad and cyclone type then contact factory

Features Safe, Secure, leak-proof, Lightweight and easy to handle, Very high Efficiency     Non-corrosive Aluminium die cast or powder coated MS body, Compact Design, Maintenance Free, Long life     Manual drain and auto drain facility, no corrosion, reduced maintenance, Easy to alter or extend a system