Unitized Substation Dealers

Our Metalclad packaged secondary substations are fully assembled, wired and ready to install. Simply mount on a plinth, cable up, earth It and its ready to use. Saves weeks of civil engineering works and cuts down installation costs drastically. Also ideal for locations where space is a restraint and aesthetics have to be given due attention. The key components in this are: - HT Metering � with power supplier approved designs - HT Protective gear � having Load Break with HRC fuses or SF6 Breakers or Ring main unit - Transformer � 100 Kva t0 1000 Kva with various option as better described Below - LT Switchgear � as per requirements with MCCB ACB and withwithout APFCR and with auto or manual changeover CHOICE OF TRANSFORMERS AVAILABLE A. Cast Resin Dry Transformers: For the best fire protection safety and ultimate choice for the indoor application. Needs virtually no maintenance and provides peace of mind. B. Hermetically Sealed Transformer: When maintenance is the key issue or installation is in harsh areas then look no further than our hermetically sealed maintenance free transformers that require no maintenance and are filled with nitrogen gas above oil level and provided with corrugated wall tanks. This arrangement completely eliminates air inside and hence no oxidisation or moisture in oil is possible. These are ideally suited for dusty areas, moisture laden areas, petro chemical applications, water plants, sewage treatment plants etc. C. Conventional Oil Cooled Transformer: These are the most cost effective and well suited for outdoor application and in very humid areas.

We are offering breaker substation. we undertake installation of ehv substations of 22 kv, 33 kv. These involve breakers and the switchyards are of radial or lilo type. Our professionals ensure that the process is in compliance with the industrial standards send enquiry

The Modular Substations are a state-of-the-art-system that simplifies conventional substation design. Modular Substations are built as a product in line with the thinking of the architects who are quite concerned with aesthetics, safety and easy of installation. Due to enclosed construction, Modular Substations avoid bird hit, human/animal contacts which may lead to fatal accidents, disruption of supply and power loss in open execution substation. In open execution installations, the AB Switch/ Transformer/LA/HG fuse are mounted on either two or four pole structures. The hanging and sagging of wires gives a clumsy appearance affecting the elevation of the building. Modular Substations are an underground cable in � cable out technology. Moreover, the tall structures not only occupy the floor area, but also shaft area along the high-rise building. Space Saving & Cost Effective : Space is major constraint in urban areas. Space to install Modular Substations is typically 4m x 2m which is approximately the space required for a car park. Saving of floor space to the tune 80-85% can be achieved by installing MSS as compared to that required for conventional installation. Salient Features : Aesthetically pleasing design, does not affect the elevation of commercial complexInaccessible to live parts, hence high degree of personal, animal & public safetyCompact in construction, occupies less floor space i.e. 4 x 2 = 8m2 onlyHighly Fire Retardant, as the transformers used are dry, cast resin typeResistant to outside temperature and humidityMinimal moving parts and maintenance freeHigh durability and operational reliabilityLow power loss and low noise transformerTailored configuration to customer needsEasy to install, operate and maintainFactory assembling and testingReduced environmental impactReduced site installation timeAll weather proof enclosureEasy for transportation Modular Substations are the factory built packages having 4 compartments : 11KV MeteringHT Switchgear Dry type Distribution Transformer LT Switchgear with Metering of desired rating with LT check metering Applicable Standards : Modular Substations are designed and tested in accordance with IS 11171 and also with individual standards of equipment like IS 2705, IS 3156, IEC 60044-2, IEC 60044-1. Application : Available in both Indoor/Outdoor Versions for : Commercial buildingsHousing ColoniesShopping MallsHotelsIndustry HospitalsSchoolsMobile Substations

Backed by rich industry experience and adroit professionals, we are offering high quality Compact Sub Station. Fully enclosed with a transformer and HV & LV connections or switchgear, Compact Sub Station is also shipped & fully assembled. We make Compact Sub Station available at affordable prices. Makes Offered : ABB, Schneider and Universal Specifications Application-Power Secondary distribution Application areas: Residential, commercial and industrial developments Type-Indoor/Outdoor-Oil Type/ Dry type Rated Operational Voltage-11KV/33KVPower Rating-Up to 2 MVA

We are offering ehv substation. We install ehv substations of 22 kv, 33 kv, 132 kv and 220 kv. This involves ct, pt and the switchyards are of radial or lilo type. These are being installed by using highly sophisticated machines and advanced technology.

The flawlessness in the assembly and designing of the Power Substation is the hallmark of the working of the company. Being a highly acclaimed Manufacturer and Supplier of Power Substation, the company offers high-voltage and low-voltage variants with a wide range of ambient operating temperature. The Power Substation is safe and reliable, and the timely deliveries make them a better choice across the domestic markets.

Unitized substations may be indoor or outdoor, with a selection of high - voltage incoming sections, a choice of transformers types and an arrangement of switchgear to suit the application.Most switchgear to suit the application.Most switchgear assemblies are configured as unit substations.Unitized substation follow the system concept of locating transformers as close as practicable to areas of load contentration at utilization voltages, thus minimizing the lengths of secondary distribution cables and buses. Lengths of cables and buses are minimized,reducing the likelihood of faults and improving voltage regulation.

Mobile Substations are one of the most demanded products listed on the Bamaa’s product catalogue. This great surge in demand for Mobile Power Substations stems from the premium quality of the machine as well as the advanced features and functionality that is incorporated into it. The unique design and compact nature of our Mobile Substation makes it stand out among other similar products available in the market. Widely used in different electrical industries to bring electricity temporarily to regions that have lost it; Bamaa Group Mobile Power Substations come equipped with wheels that make them easy to transport and move around. We also use premium quality materials and electrical components to manufacture these electrical mobile substations that give it robust construction and durable structure. Over the years, we have been able to find Kenya,Nigeria,Qatar,Zealand,Taiwan among the best Mobile Substation Manufacturers and Suppliers in India.   FEATURES High load bearing capacity Ability to handle fluctuating temperatures Low maintenance Integrated protection and control features Compact design that occupies small area Robust construction Mobile in nature with easy to move wheels assembly WIDELY USED IN Electrical Assemblies Power plants Isolated areas with no power supply

PAD Mounted Substations are designed for use in distribution application as well as for dedicated loads. PAD Mounted Substation�s are easy to install and are of low cost. These PAD Mounted Substations are basic & simplest configuration required for distribution substation. Pad Mounted Substation are designed in accordance with IS 14786 / IEC 61330 standards with degree of protection for IP 54 or as per customer requirement.

In accordance with IEC 62271 Standard, the prefabricated steel enclosure housed - HT Switchgear, Transformer and LT Switchgear and associated equipment's to form a composite compartmentalized UNITISED SUB-STATION with concern to safety and meet the Urban and Industrial needs. The Substation is designed to take care of moisture, dirt, condensation in coastal areas and is Completely lockable, to protect against unauthorized access.

Normal OH lines are vulnerable to natural disasters like flood, storms etc. The suspension   poles, tension poles, pole with distribution transformers may get severely damaged due to disasters causing outages of power for a very long time. Normal maintenance takes longer period to rectify the damaged equipment/ structure to restore power supply. This trailer mounted mobile sub-station can act as a substitute of any kind of poles i.e. Tension, suspension & DT pole and acts as “Emergency Restoration System” in distribution system. The Emergency Restoration System will contain all the equipment the distribution sub-station contains i.e. the bus stringing equipment complete with hardware, surge protection system, switching system, fuse protection system, distribution transformer, LV protection system with fuses etc. The Emergency Restoration System will have the anchoring system suitable of all kind of soils i.e. marshy soil, rocky soil and normal soil & concrete. All the equipment mounted i.e. LAs, Dropout fuses, AB Switch, Insulators,Hardware and Distribution Transformers will be proof tested and will be of fail safe quality. Transformer used will be of ‘AN’ cooled in place of oil cool transformer which will be absolutely hazard free. In the Trailer mounted s/s the transformer is not mounted on pole, but positioned at the base of the trailer to reduce the overall weight on the pole. The poles are divided into three parts and all are fixed on the trailer. However the top two parts will be erected on top of the bottom most with the help of GIN pole, the mechanism is showing in the above diagrams. LA, Transformer body are separately earthed.

We are listed among the foremost Switchyard Substations Manufacturers, Suppliers and exporters based in Noida, Uttar Pradesh. We offer technologically advanced Switchyard Substations that are specially developed at our in house facility. Widely used as the distribution hub where electrical power is provided to the plant from outside and electrical power is sent out from the plant; our Switchyard Substations offer great performance and ensures complete safety of electrical setup as well as personnel. We also verify the quality and performance aspects of our Switchyard Power Substations and only once they meet industry accepted norms, they are deemed fit to be sent to customers. Moreover, due to our presence in Middle Eastern countries and African nations, we also ensure that our product meets international guidelines for Switchyard Substations. These are also competitively priced to make them one of the most popular substations available in the market currently.   Features Competitive pricing Advanced safety features Designed in line with customer’s requirements Checked for quality and performance in compliance with international norms Available in bulk quantities Easy to install, use and maintain   Widely used in   Isolators Towers Thermal power stations Wind power stations Gantries Power plants CT   Our Main Market for export of Switchyards Substation   Indian States : Manipur, Tripura, Arunachal Pradesh, Kerala, Jharkhand, Karnataka, Himachal Pradesh, Haryana, Mizoram, Sikkim, Rajasthan, Gujarat, West Bengal, Tamil Nadu, Nagaland, Assam, Goa, Madhya Pradesh, Andhra Pradesh, Jammu and Kashmir, Punjab, Uttar Pradesh, Uttarakhand, Maharashtra, Bihar, Chhattisgarh, Meghalaya   Asian Countries: Bahrain, Qatar, Jordan, Taiwan, Oman, Nepal, Cyprus, Yemen, Hong Kong, Malaysia, Mongolia, South Korea, Bangladesh, Laos, Philippines, Myanmar, Saudi Arabia, Thailand, Bhutan, Pakistan, Cambodia, Singapore, United Arab Emirates, Indonesia, North Korea, Lebanon, Sri Lanka, Japan, Tajikistan, Uzbekistan, Israel, Azerbaijan, Brunei, Armenia, Maldives, Turkey, Afghanistan, India, Kuwait, Georgia, Vietnam   European Countries : Austria, United Kingdom, Czech Republic, Belgium, Germany, Ukraine, Italy, France, Spain, Greece, Belarus, Netherlands, Portugal, Sweden, Finland, Russia, Slovakia, Denmark, Serbia, Romania, Poland, Hungary, Bulgaria, Switzerland, Norway, Ireland   African Countries : Niger, Madagascar, Ethiopia, Comoros Swaziland, Benin, Rwanda, Chad, Algeria, Senegal, Zambia, Morocco, Uganda, Angola, Libya, Kenya, Zimbabwe, Gabon, Togo, Ghana, Liberia, Mauritania, Cameroon, Eritrea, South Africa, Namibia, Cape Tunisia, Tanzania, Nigeria, Burundi, Botswana, Egypt, Guinea, Malawi, Verde, Mali, Mauritius   South America : Argentina, Chile, Colombia, Brazil, Venezuela, Peru, Bolivia, Ecuador   Middle East : Bahrain, Jordan, Oman, Turkey, Lebanon, Cyprus, United Arab Emirates, Saudi Arabia, Kuwait, Egypt, Yemen, Israel, Qatar,

This is a portable substation. Easily assembled and highly compatible with environment. it maintains room temperature. walls are insulated with high density thermocole. it looks like a cottage.

CG offers Distribution Unit Substations, including Mini and Micro type. These substations are manufactured at our facilities in India and Ireland.

Compact Substation is a prefabricated secondary substation with the combination of minimum voltage & switchgear,low voltage switchgear, Distribution Transformer and associated components of metering and protection,all fitted in one compact unit in accordance to the standards.