Process Indicator Dealers

Micro Controller based 24 bit Resolution AD Converter Inputs ±20mA, ±56mV, ±10V User Scalable Display Range from -199999 to +199999 (±2 Lakhs counts) Resolution 0.00001 to 1 (user selectable) Programmable input range settingeg: 4-20mA, 0-5V, 0-40mV, -10 to 20mV etc.) 24 DC Power Supply for Remote transmitter excitation

We are offering process indicator. Protocontrol offers process indicator - controller type pi 350 ls specially developed for large process industries. This indicator displays are suitable for process parameters like flow, temperature, level, speed, ph etc. It accepts signal from field sensors and transmitters. The i/p can be 4- 20 m a, mv or any other. The indication is in the form of 0 - 100 % or any other engineering unit like rpm , pressure in bars, m / min , liters / min, amp, tons. Etc. Alarm and trip outputs are also available if some control action is required. Setting is done with a potentiometer, for this set parameter is indicated when push button is pressed. specification: supply voltage: 230 v ac, 50 hz, input : to be specified while ordering. i/ p: 4- 20 m a, 0 - 10 v dc, m v or resistance. display size : 1/ 2 inch, 1 inch, 2 inch or 4 inch or any other output : 0 -100 % or any other engineering unit setting facility : optional, 1 set point, 2 set point, out put contact: 1 c/o relay contact, 5 amp rating enclosure : front panel mounting / wall mounting

Special features : high resolution 3½ digit display. Large 220.mm display. In-built transmitter power supply. Adjustable range (zero & span). Selectable decimal point. Panel mounting or wall mounting option.

Accept input RTD, Thermocouple, Voltage, Current Process - Temperature, Pressure, Humidity, Level Flow, Co2, Air velocity, Diff pressure etc. Resolution Available : 0.0010.010.11 Display Range : -999 to 9999 counts Panel Wall mounting, Power supply : 230 VAC

Universal Input Process Indicators PC Communication – RS232 / RS485 MODBUS RTU Protocol(Optional) Available in 3 / 4 / 5 digits 3” / 0.5”/ 1”/ 2”/ 4” 7 – segment RED display Accuracy better than ± 0.25% FSD 24V DC Transmitter Power Supply Retransmission output (Optional) 2 / 4 programmable Alarm contacts Fully configurable through front keypad

to furnish the exact needs and necessities of our customers, we are readily betrothed in bringing forth a broad gamut of process indicator. The inputs used in their development process are of exceptional quality standards and are well examined before getting used. Also, the complete spectrum of products offered is checked sternly before getting shipped to our customers.specifications: input signal range: 0 - 1v, 0 - 2v, 0 - 10v, 4 - 20 ma from transmitter supply voltage: 24v ac/dc to 240v ac/dc display: respective parameters with resolution set point: settable through keypad output: buffered same as i/p, serial o/p for pc, control o/p if setting is done. box: 96 x 96 x 150, 96 x 192 x 200 or suitable

We provide process indicators and process indicating controllers as per the clients demand & the process needs. Input can be 4 to 20 ma, 0 to 10 v or, pulses, resistance etc. Output can be potential free contacts (single two or, four nos.) or, re-transmitter etc. Display will be led 7 segment or, lcd power supply can be 230 v ac, 110 v ac, 24 v dc or, 12 v dc mounting types can be panel mounted, wall mounted or, field mounted enclosure types can be ip 40, ip 54, ip 65 or, flameproo

This is a versatile and compact high speed Digital indicator indigenously developed for a variety of Load / Pressure sensing applications. It can work as a PLC front-end with analog retransmission output. It can also be used for Single component filling, Hopper / Tank level control, High speed load testing , etc. RS485 serial communication is provided for interface to other instruments. It is housed in a 96mm X 48 mm DIN Panel mount enclosure and operates using 230 V AC SMPS based power supply.

Products Digital Indicator • Temperature Process Indicator • T+ RH Indicator • Multipoint Temperature • Large Display Indicator • Portable Battery Operated Indicator • Molten Metal Temperature Indicator • Indicators in FLP enclosures Digital Contoller • ONOFF Temperature Process Controller • PID Temperature Process Controller • Digital Ramp Soak Programmers • Digital Multiloop Programmers • Digital HVAC Controller • Digital T+RH Controller • Digital Deep Freezer & Ultra Low Deep

Accept input Voltage :4.20mA @ 24 VDC ( 2 Wire)Process :Temperature , Pressure, Humidity ,Level Flow,Co2, Air velocity, Diff pressure etc …Resolution :0.001/0.01/0.1/1 selectableDisplay Range :-1999 to 9999 Selectable 4 ½ Digit LCD Display with selection Keys IP 65 weather Proof enclosure, Also available flame Proof enclosure with CMRI Group I,IIA&IIB Certified fire safety with chemical and oil industries , save cable 

The Selec PIC101 Process Indicators / Multifunction indicator suitable for process values indications and alarms in operation of equipment, machinery, systems or processes in a wide range of industrial applications. The controllers operate from a range of thermocouple or 2/3 wire PT100 (RTD) input sensors, or from a millivolt, 0-5Vdc, 0-10Vdc or 0/4-20mA process signal(Scalable). Selectable temperature unit: °C / °F. Versions are available with relay and analogue outputs which can be configured. The process indicator are housed in a compact square enclosure which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270V AC.   Features Input: J, K, T, R, S RTD: PT100 Linear mV: -5 to 56 mV Current: 0 / 4 to 20 mA Voltage: 0 to 10V DC 24V DC sensor supply Selectable temperature unit - °C / °F 85 to 270V AC/DC supply voltage