Insize Advanced Type Digital Indicator
5,960 - 23,169 Per Piece
1 Piece (MOQ)
Pressure Transmitter Digital Indicators
30,000 - 35,000 Per Piece
1 Piece(s) (MOQ)
The product is used for applications where local level dispaly of pressure is also required besides the 4-20 mA signal for control room devices like indicators, controllers, recorders, PLC, DCS etc . Our Pressure Transmitter Indicators can be attached to transmitters with 4-20 mA output, and is also scalable on-site without external tools. Applications Process Plants Machine tools General industrial applications Special Features Indication range : 1999 - 9999 Attachable to transmitter with 4 - 20 mA output and angular connector to DIN 175301-803 A Scalable on-site without external tools Ingress protection IP 65 Ex version II 2G Ex IA/IB IIC/IIB T4 (model A-IAI-1) optional
Best Deals from Digital Indicator
4.0" Single Side Jumbo Indicator with RS-485 (Modbus)
6,400 Per piece
01 piece (MOQ)
4.0” Single Side Jumbo Indicator with RS-485 (Modbus) – 4 digit Display Model No. - RS-4000 (Single Side) Digit Size – 4.0” Input - RS-485 (Modbus)
Humidity Readings Indicator with Data Logger
1,000 - 12,000 Per Piece
1 Piece (MOQ)
PSGM-1-D-AGS (CEMS-C) Continuous Stack Gas Emission Monitoring System
Get Price Quote
PSGM-1-D-AGS (CEMS-C) Continuous Emissions Monitoring system can monitor gases, including SO2, NOx, O2, dust, humidity, temperature, pressure, flow parameters, etc. In addition, also can monitor gases for a particular occasion such as HCI, HF, CO, CO2, NH3, H2S, Cl2, VOC, etc. PRIMA is the only high and new technology Indian company witha full set of intellectual property rights of flue gas monitoring. Its independent research and development products include ultraviolet flue gas analyzer, dust monitor, temperature pressure flow, humidity meter, HCI analyzer, HF analyzer, pretreatment system, monitoring software, etc. Technology platforms either Extractive, Hot Extractive, Hot-Wet Extraction, Dilution or In-situ measurement system with Electrochemical, PID, NDIR, TDLAS (Laser), FID, UV-DOAS measurement technology. Application : Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator. Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de nitration.
Digital Temperature and Humidity Indicator
6,370 Per piece
A Digital Temperature & Humidity Indicator is a device that simultaneously measures and displays both ambient temperature and relative humidity. It is used in environments where these two parameters must be monitored and controlled — e.g., laboratories, storage rooms, chambers, manufacturing zones, HVAC rooms. It replaces older analog dial gauges with digital precision, easier reading, and often output/alarm options. Key Features Dual-parameter display: both RH (Relative Humidity) and temperature shown on same unit. Optional features: analog outputs (4-20 mA) for integration into control systems; communication ports (RS-485, Modbus) for remote monitoring. Quick response time for changing ambient conditions.
0 
View Profile
PRC Digital Weighing Indicator
5,500 Per Piece
1 Piece (MOQ)
Weighing indicatortype : prc. we provide only user manual. charges extra for technical help / installation. Stamping Charges are extra. Additional Information: Delivery Time: 5 Packaging Details: STANDARD PACKING
Humidity Indicator & Controllers
Get Price Quote
Over the years, we have emerged as a one-stop destination, where buyers can get a range of Humidity Indicator & Controllers. We are prime Manufacturer, Exporter and Supplier of Humidity Indicator & Controllers in Delhi, India. The company has a team of quality controllers that supervises the entire process right from the selection of required material to the final delivery. Rely on us and place orders now! Details : Humidity Indicators and Humidity + Temperature with Relay or SSR Output On Request 3 wire Capacitive sensor10-95 RH Size 72x72x110 36x72x74 96X96X70 Humidity - Temperature Proportional/ On-off action Hysteresis - 0 to 20% RH :0 to 20 Offset - 19 to+19% RH :-19 to+19°C Relay action : Humidity / Dehumidity Heat or cool Output - Single change over relay for each ( 5 Amp @ 230 VAC) SSR O/P on request
PI542A 4 Digit Process Indicator
Get Price Quote
1 Piece (MOQ)
SANSEL offers PROCESS INDICATORs are extremely versatile Indicators that can be used for a wide variety of applications. These INSTRUMENT offer extreme reliability and low cost for Process measurement and logging. PI 542A is a Microprocessor based instrumentation ensures accurate readings for all LinearParameters. A number of programmable features including In-line calibration are standard. All the parameters are saved in a non volatile EEPROM memory which doesn't needs any external battery.PI 542A can offer relay outputs for signals exceeding set points. Programmable Re Transmission output models are also available in addition to the industry standard 4 -20mA or 0 - 10V DC output. Optional RS 485 (2 wire ) output also provided for PC communication with PC Interface software & also with MODBUS RTU protocol.Features 4 Digit 7 segment RED LED display High Accuracy Compact Size 24 Bit ADC Resolution Selectable Inputs RTD , all types of thermocouples , mA, mV , Voltage , ohms. Wide Selectable Range between -1999 to 9999 counts Easy Field Configurable with Front Key Calibration No Hardware Selection For the Input Signals Optional Opto Isolated Re Transmission Output. Optional RS 485 (2 wire) Output for PC communication Optional PC software with Monitoring, Logging, Report & Graph Optional MODBUS RTU protocol 24V DC External Sensor Supply Programmable Decimal Point & Display Noise Filter Universal Supply Voltage 90 to 270 AC / DC Specification Display 4 Digit 7 segment RED LED Analog Inputs 0 - 20 mA, 0 to 75 mV, -10 to 10 V DC, 0 - 400 Ù (H & L Limit Programmable) Temperature Inputs RTD - PT 100, Thermocouple - J, K, R, S, T, B, N, E Analog Display Range* - 1999 to 9999 (H & L Limit Programmable) Temperature Range RTD - PT 100 (-199.9 to 850.0°C / -199.9 to 1562°F) (H & L Limit Programmable) RTD - PT 1000 (-50.0 to 400.0°C / -58.0 to 752.0°F) TC - J (- 200.0 to 200°C / -328.0 to 2192°F) TC - K (- 200.0 to 1372°C / -327.8 to 2501°F) TC - R (- 40.0 to 1768°C / -40.0 to 3214°F) TC - S (- 40.0 to 1768°C / -40.0 to 3214°F) TC - T (- 200.0 to 400°C / -328.0 to 752°F) TC - B (300.0 to 1820°C / 572.0 to 3308°F) TC - N (-200.0 to 1300°C / -327.8 to 2372°F) TC - E ( -200.0 to 999.9°C / -327.8 to 1832°F) Unit selection °C / °F (for RTD & TC inputs) Analog Resolution 0.001 / 0.01 / 0.1 / 1 (Selectable) Temperature Resolution 0.01(for RTD-PT 100 input(°C) only) / 0.1 / 1 °C / °F Accuracy ± 0.1 % of FS Filter Constant 1 - 100 % (Adjustable) Relay Output**(optional) 2 Relay Re Transmission**(optional) Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC PC Communication** RS 485 (2 wire)(optional) PC Software**(optional) Monitoring, Data Logging, Report & Graph Sensor Supply(external) 24 V DC ±10% @ 100 mA (5A rated) with Four Relay Status Selection, Hysterisis, Cyclic Delay Operating Environment 0 - 50ºC / 5 to 95 % RH Non Condensing Power Supply 90 to 270 V AC / DC / 50 / 60 Hz Over All Dimension 48(H) X 96(W) X 110(D) mm Cut out Dimension 44(H) X 90(W) mm Housing Panel Mountable ABC Plastic Weight 250 grams (Approx.)
MBS-SS-MM-01 Earthing Integrity Monitoring System
Get Price Quote
1 Piece (MOQ)
0 Website
Danfoss / Damcos VPI Indicator 160G0512 160G0421
99 - 999 Per piece
Danfoss / Damcos System Hydraulic A/S VPI Indicator Type : 160G0512 160G0421 Gear Ratio : 050 : 1 Max Cont. Load : 2.5WMade In Denmark
Humidity Indicator Cards
18 Per Piece
250 Piece(s) (MOQ)
Backed by a team of dexterous professionals, we have emerged as a proficient Manufacturer, Exporter & Supplier of highly efficient Humidity Indicator Cards. These cards are specifically designed in order to indicate the user in case when relative humidity exceeds. Our Humidity Indicator Cards are used in electronic components, electronic displays, automotive electronics, etc. We make available Humidity Indicator Cards in bulk and at the most competitive rates. More About Humidity Indicator Cards :A humidity indicator card (HIC) is a card on which a moisture-sensitive chemical is impregnated such that it will change color when the indicated relative humidity is exceeded. This item is an inexpensive way to quantify relative humidity levels inside sealed packaging. They are available in many configurations and used in many applications, especially military and semiconductor. The most common humidity indicator cards change color from blue (less than indicated RH level) to pink (greater than indicated RH level). Humidity indicator cards are also present on many small electronic devices, ranging from cellular phones to laptop computers, for the purpose of alerting the manufacturer that the device has been exposed to high levels of moisture. Humidity Indicating Cards helps monitor desiccant activity and are ideal for use with desiccants in any application where moisture control is critical. Any color change from blue to pink indicates an unsealed container and/or damaging level of humidity. Benefits : Are easy to use and read for fast monitoring Offer a wide range of indicating materials, which change colors at a variety of relative humidities 10% to 60% Provide permanent accuracy to ±5% of relative humidity due to a calibrated sensitive indicating element Indicate humidity conditions in various types of barrier packaging Often used in conjunction with a desiccant Allow instant visual verification of product integrity Approved for MIL – I – 8835 applications Low cost Spots turn fr om blue to pink to indicate humidity levels Applications : Electronic Components Electronic Displays Automotive Electronics Industrial Electronics Computer Hardware Medical Electronics Consumer Electronics Military and Aerospace Electronics
Digital Feeder Indicator
Get Price Quote
1 Piece (MOQ)
Humidity Indicator (Model 200RH)
Get Price Quote
1 Piece (MOQ)
The Artech Humidity Indicator Model 200 RH directly indicates Relative Humidity. The Fully solid state circuit with no plug-in-cards enables the instrument to withstand severe vibrations and shocks.
Two Wheeler Front Direction Indicator with Position Lamp
Get Price Quote
100 Piece (MOQ)
Digital Weighbridge IT Indicators
22,650 Per Piece
1 Piece (MOQ)
0 Website
Process Indicator
Get Price Quote
Process Indicator Series LCI132 Process Indicator 1/32 DIN, Fully Programmable THE SERIES LCI132 PROCESS INDICATORS offer flexibility and value in a low cost, compact 1/32 DIN package. The shallow depth of these full size panel meters allows installation in panels only 2.76" (70 mm) deep with room to spare. Product Applications Display process values from various transmitters ModelDescription LCI132-00Process indicator, ±100 VDC; ±20 VDC; ±10 VDC; ±200 VDC; ±20 mA DC input, 120/240 VAC supply voltage. LCI132-01Process Indicator, ±100 VDC; ±20 VDC; ±10 VDC; ±200 VDC; ±20 mA DC input, 24/48 VAC supply voltage. LCI132-10Process Indicator, ±100 VAC; 600 VAC; 5A (DC) 1A (DC); -199.9 to +600 VDC; ±100 VDC; -1.999 to 5A (DC) ±1A (DC) input, 120/240 VAC supply voltage. LCI132-11Process Indicator, ±100 VAC; 600 VAC; 5A (DC) 1A (DC); -199.9 to +600 VDC; ±100 VDC; -1.999 to 5A (DC) ±1A (DC) input, 24/48 supply voltage. Specifications LCI132-0X Range:Input Volts (DC): ±200 V, ±20 V, ±10 V; Input Amperes: ±100 mV, ±20 mA; Resolution:Input Volts (DC): 0.1 V, 0.01 V, 1 mV; Input Amperes: 0.1 mV, 0.01 mA; Input Impedance: Volts: 1 M Ω, mV: 100 M Ω, mA: 12.1 Ω. LCI132-1X Range AC:Input Volts: 600.0, 100.0; Input Amperes: 5.000, 1.000; Range DC:Input Volts: -199.9, ±600.0, ±100.0; Input Amperes: -1.999, +5.000, ±1.000; Resolution:Input Volts: 0.1 V; Input Amperes: 1 mA Input Impedance: Volts: 3 M Ω (106), Amps: 12 m Ω (10-3). Accuracy at 23ºC ±5ºC:100/600 VDC 1/5 A DC; 600V/5A AC: ±(0.2% reading + 3 digits). 100 V / 1A AC: ±(0.4% reading + 4 digits). Temperature Coefficient:100 ppm/°C. Warm Up:5 minutes. Power Supply and Fuses (DIN 41661) (Not supplied) LCI132-X0:85–265 VAC 50/60 Hz and 100-300 VDC: Fuse: 0.1A/ 250V. LCI132-X1:21-53 VAC 50/60Hz and 10.5-70 VDC: Fuse 0.5A/ 250V. Display LCI132-X0:85–265 VAC 50/60 Hz and 100-300 VDC: Fuse: 0.1A/ 250V. LCI132-X1:21-53 VAC 50/60Hz and 10.5-70 VDC: Fuse 0.5A/ 250V. Environmental Operating Temperature:-10 to 60°C. Storage Temperature:-25 to 85°C. Relative Humidity (non condensed):< 95% @ 40°C. Panel Sealing:NEMA 4X (IP66). Features Fits in 1/32 DIN panel cutouts IP65 (NEMA 4X) front housing Fully programmable Various voltage and current inputs fits most processes
Hand Held Indicator
Get Price Quote
Position Indicator
Get Price Quote
Digital Weight Indicator
Get Price Quote
1 Pound (MOQ)
Digital Weight Indicator
8,000 Per piece
2 Piece (MOQ)
Features\\n\\nEasy to use\\nConsistent performance throughout its usage\\nLong lasting\\n
Loop Power Indicator
3,000 Per Piece
1 Piece (MOQ)
We offer the LCDD Loop Power Indicator, a wall-mounted device with an LCD display for accurate readings. With an impressive accuracy of +/-0.1% and an input signal range of 4-20 MA, this indicator is ideal for various applications. It can operate within a storage temperature range of -25°C to 55°C, ensuring reliable performance in different environments. As a leading Manufacturer, Exporter, Supplier, and Trader, we provide high-quality products that meet industry standards and deliver precise results for your monitoring needs.
0 Website
Loop Power Indicator
Get Price Quote
10 Piece (MOQ)
Continuous Stack Emission Monitoring Systems
850,000 Per Piece
1 Piece (MOQ)
Digital Humidity Indicator
1,250 - 1,450 Per Piece
3 Piece (MOQ)
Sight Flow Indicator for Process Pipe Line
2,750 - 10,000 Per piece
2 Piece(s) (MOQ)
Jumbo Process Indicator
Get Price Quote
We are instrumental in offering a wide range of Jumbo Process Indicators that is highly demanded among the clients owing to its superlative features. These Jumbo Process Indicators are manufactured in compliance with set industrial standards. Avail Jumbo Process Indicators at most competitive prices.
Analog Winding Temperature Indicator
3,800 Per Piece
1 Piece (MOQ)
Digital Water Level Indicator
1,000 - 2,000 Per Piece
The Digital Water Level Indicator consists of a cable reel of not less than 30 meters, 40 meters, 60 meters, 90 meters and 150 meters long and two insulated wire bared at the contact which passes through a weighed probe of any suitable material. The Digital Water Level Indicator has complete cable reel carrying case, battery operated indicator unit, a spool with slip rings and bushes connecting the free ends of the insulated wire to the indicator. The reading is taken to the accuracy of 5 mm by measuring tape. We are a preferential choice for procuring high performing and quality Digital Water Level Indicator. Why Our Digital Water Level Indicator? Designed to work in environmental conditions Automatic data storage in system memory Data storage with date and time stamp Solar panel which recharges the batteries automatically Replaceable SMF batteries Data file saved in MS Excel sheet form Supplied With Solar panel and Shaft encoder type water level sensor Or Pressure type submersible water level sensor
Programmable Process Indicator
Get Price Quote
Avail from us Programmable Process Indicator that is an instrument used for reading and indicating various process parameters. We supply a wide range of Programmable Process Indicator which is used for various purposes in the laboratories. We obtain these instruments from the best manufacturers and can assure you of their quality. Attributes Consistent performance Accurate results Reliable operations Hassel free operations Compact design Uses Wide application in laboratories Specifications Model PIC-1101 PIC-2101 PIC-3102H SPI-421 Dimensions(HXWXD)mm 96X96X100 72X72X85 48X96X120 48X48X100 Display Red ,3½ Digit, 0.56" Upper: Red 4-Digit, 0.4" Lower: green, 4-Digit, 0.3" Range 4 Digits (0 - 9999 Range & DP Selectable) Correspond to Input INPUT Voltage,Current 0 -10V DC, 4 - 20 mA , mV, Pulse 4 - 20 mA, 0 - 10 VDC Other Resistance RetransmissionO/P (Optional) 4 � 20 mA, 0 - 10V DC - Output (Optional) Relay 5 Amp, 230 VAC For Alarm or Trip Function Aux. Supply(Optional) Auxiliary Power Supply For Transmitter - Power Supply 230V AC ± 20%, 50 Hz 90-270V AC/DC, SMPS Cut Out (mm) 92 X 92 68 X 68 44 X 92 45 X 45 Mounting Flush panel mounting with clamps fixed Behind the panel
Post Free Ad
