Digital Indicator Dealers in Chennai

We are distributor & trader of Digimatic Indicator with Back Lit LCD Screen. Features: With the ABSOLUTE Linear Encoder technology, once the measurement reference point has been preset it will not be lost when the power is turned on. GO/±NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance. An analog bar indicator has been integrated to handle upper/lower limit approaching and zero approaching. It enhances the ease of operation in the same manner as a dial indicator. The display range of the analog bar can be changed.   Technical Data: Accuracy: Refer to the list of specifications. Resolution: 0.01mm/0.001mm or .00005”/.0001”/.0005”/.001”/0.001mm/0.01mm Display: LCD Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. response speed: Unlimited Measuring force: 1.8N/2.3N* or less (*50mm range models) Power supply: 9V DC (via AC adaptor) Functions: Origin-set/Preset, Zeroset, GO/±NG judgment, Max/Min value hold, Runout measurement, Resolution switching, Counting direction switching, Power ON/OFF, Data output, inch/mm. conversion (on inch/metric models only). Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error. Standard Accessories: 06AEG180JA: AC Adapter 120v 137693: Lifting Lever

Accept input RTD, Thermocouple, Voltage, Current Process – Temperature, Pressure, Humidity, Level Flow, Co2, Air velocity, Diff pressure etc … Resolution Available :0.001/0.01/0.1/1Display Range :-999 to 9999 counts Panel /Wall mounting, Power supply :230 VAC Dual display sizes :2.3” ,4 “and 6” Retransmission out put : 4 -20mA optional 

The Selec PIC101-A-V/I-230 Process Indicators/ Multifunction indicator suitable for process values indications and alarms in operation of equipment, machinery, systems or processes in a wide range of industrial applications. The controllers operate from a range from a millivolt, 0-5Vdc, 0-10Vdc or 0/4-20mA process signal (Scalable). Versions are available with relay and analogue outputs which can be configured. The process indicator are housed in a compact square enclosure which panel mounts, and are auxiliary powered from 85 to 270V AC.     Features Input: J, K, T, R, S RTD: PT100 Linear mV: -5 to 56 mV Current: 0 / 4 to 20 mA Voltage: 0 to 10V DC 24V DC sensor supply Selectable temperature unit - °C / °F 85 to 270V AC/DC supply voltage

UPC 5200 is a new approach to Process Measurement integrating Control I/Os which Measures input from Temperature(J,K,T,R,S,RTD, mA/Volt), Current(4-20 mA / 0-20 mA), Volt(0-10v / 1-5v). Our Process Indicator which acts as a controller device with respect to the input by providing two number of Relay's.

Resolution Available : 0.0010.010.11 Display Range : -999 to 9999 counts Panel Wall mounting, Power supply : 230 VAC Large display sizes: 1”,2”,4”,6”,8” etc… Retransmission out put : 4 -20mA optional

Wide choice of Input types. Fully programmable through keypad. 5 Digit LED Display. Linearisation of T/C & RTD. Realistic cold junction compensation. Sq.root / Linear indication of mA / V. Rangeable in Engineering units. Open sensor Indication. Two potential free contacts. Optional Retransmission output.

Features Providing LED for water level indication. Indicating water level for both OHT and SUMP. Long lasting sensor. Addition of level indication in digital display. Easy to install, portable and reliable. Suitable for all types of motor and pumps. Suitable for panel boards. Advanced Embedded Technology. Corrosion free level sensors.