Digital Indicator Dealers in Pune

Clean Room Indicator (Temp. + RH + DP + Time) FDA 21 CFR part 11 - GMP-4 compatible Indicator with inbuilt Temp. + RH measurement in single enclosure.Incorporates highly stable built-in or Remote Temp.+ DP sensor.Process parameter Hi and Low LEDs. Status indi. For both channel.Inbuilt buzzer to audible process value violation.MODBUS RTU multi drop RS-485 serial comm. for PLC, SCADA, etc.Compact, All Stainless Steel enclosure with 35 mm depth.Ex. Flameproof model available for Hazardous applications.

GENERAL DESCRIPTION The loop powered indicators are designed to display any process parameter like temp, flow,pressure,ph & others. These instruments accepts, 4 to 20 mA DC signal and generates the power from the signal it self. No external power or battery is required.The loop powered indicators are available in flame proof, weather proof, general purpose housing with wall mounting, panal mounting & 2" pipe mounting types. The CMRS certificates as per IS 2148 for flame proof versions are also available with the instrument. The state-of-the art of technology to display the parameter with high accuracy & linearity & low temp.Drift is employed. The range & decimal point are selectable on site with the help of DIP switch. FEATURES Range & Decimal point field selectable by DIP Switch. No need of external power. High accurancy & linearrity and low voltage drop. Flame proof, weather proof, Genaral purpose versions available. High accuracy & linearity. Low loop voltage drop. CONSTRUCTION & OPERATION The glass epoxy, Green mask with high quality component board is mounted on brass studs. The instrument is mounted on a MS plate & this plate with 2" U clamps are fitted on 2" pipe. DIP switch & LCD are visible from outside to adjust & read the ranges. Zero, span trimpots are accessible from outside for ON - line calibration for flame proof versions. The 4 to 20 mA signal generates the power for 1C, & a series resistance generating a voltage drop are fed to display the process parameter. The rangeability is added parameter. The rangeability is added with zero, span calibration trimpots. APPLICATIONS For local indication of process parameter in a huge plant Loop powered indicator is ideal since no power is required. These are used in steel, fertiliser, food, chemical, dairy, rubber & sugar industries.  

Sansui Electronic Weighbridge Terminal is specially designed to withstand all environmental conditions prevailing in the weigh cabin. The unit can operate easily at temp. upto 60°C. Thus no air conditioning is required for weigh cabin. SWC Indicator is a simple indicator which shows only weight. Has LED type seven segment display tare facility also provided..

Specifications:- Input: RTD/Thermocouple. Range: For thermocouple- 0 to +999 ºC, For RTD(Pt-100)- 0 to 800 ºC Accuracy: 0.3% ±1ºC Power Supply: 230 VAC/ 24 VDC ±10% Indication: Seven Segment 3.5Digit LED Display. Operating Temperature: -10 to +60 ºC, Humidity: 0 to 90 %Rh Size: 96x96mm, 160x80mm, 72x72mm, 48x48mm, 48x96mm, 96x48mm

Offering the best quality Loop Powered Indicators which are manufactured using superior grade material and advanced technology. Our products are known for their accurate results, high efficiency and longer equipment life. We are one of the best known and trusted manufacturers, exporters and suppliers of Loop Powered Indicator all over the country and across international borders. These Loop Powered Indicators are available at competitive prices and with the promise of prompt delivery.

Specifications:  Display   4 digit non-contact (RPM indicator)   Bright red 0.5 seven segment display   Range 1 RPM to 9999 RPM Accuracy +1-1% of FS User programmable speed limit trip point with keypad 2 C/0 relay output rated for 5A@ 240VAC / 28VDC (Resistive) Accept NPN / PNP proximity switch inputs   Inputs 1 pulse per revolutions / Scale Factor Supply 110 V / 230VAC Dimensions

ESD's make 90 series temperature indicator is suitable for continuous measurement of 2 or 4 channels at a time in a single unit. ESD 9073 ESD 9086 Ranges Std. as per chart below (other on demand) Input Pt � 100 Thermocouple 4 � 20 mA No of channels Two Four Indication 199.9 12.5 mm Red LED display

LOOP POWERED INDICATOR Series 2211 (2211-EX & IS 2211) Features 1 Volt Loop Drop Calibration in any engineering unit Weather-proof /Ex-proof Al-casted enclosure Built-in references for easy calibration External Span Zero adjustment provided

4 – 20 mA Input Loop Powered Indicators Intrinsically safe – Approved Voltage drop less than 1V – Typical Range settable Easy calibration, Span – Zero adjustable 3½ – digit 0.5” or 1” LCD or Available in 4½ Digit 0.43” LCD Available in Ex-Proof Enclosure

To decrease the pollution created by the dusty condition of the conveyor, Water spraying is done on the conveyor through the nozzles. when these nozzle are activated, Water is sprayed over the conveyor to settle down the dust. these nozzle are activated when the belt is in loaded condition. Hence, This belt loading monitor plays an important roll of ensuring the belt is running with the load and water is sprayed when the conveyor is running in loaded condition of the Belt.     Operation :   The extension stand of belt Loading Monitor is mounted in inclined position to the action of the spring. So that Rubber Roller remain upward & the proximity switch remain OFF. When the Belt is started with Load (material), The belt will press the Rubber Roller downward thereby lifting the Mechanical Flag in front of proxirnity switch. Than Proximity switch gives the signal that can be used as a sense of Belt Loading condition. This detection of the Roller is between 5mm to 30 mm

Our firm specializes in offering an excellent range of On And Off Controller.This product is mostly used in various domestic and commercial applications. This inventive range of controller is widely demanded in various industries for meeting diverse applications. To maintain previously set industry defined quality standards, the offered product is manufactured using quality proven raw materials and highly latest & advance technology. Also, the product is examined properly by our well educated quality controllers upon distinct parameters of quality.Features: Rust resistance Smooth performance Easy to install

These hand held digital temperatures can be equipped with a Pt-100 RTD temperature sensor thermocouple Universal. We also supplies a wide range of other probes for this instrument. It typically runs on its standard 9VDC battery. A large 3.5 digit LCD display shows your reading. Very easy to operate..

Rockway’s Digital Indicator displays digital weighment and it also has a software and memory where it can generate a customized report. Our indicator has a inbuilt memory of 2 lakh transactions and it can take printouts in any form and at any stage or anytime. For eg: Today if you want to know on 15th Nov, 2008, how many transactions were there in the particular weighbridge ? So one has to the date and will get the full report on no. Of transactions, vehicle number, incoming and outgoing information and details of the customer or form where material is coming is stored in the inbuilt memory. Further the indicator can generate reports as per material, supplier, vehicle no., etc.. We are supplying Hi-Tech Double Ended Shear beam type load cells of capacity –20 Tonnes each. These Load cells are of SENSORTRONICS make (world leaders in Transducers -load cells/sensors & instrumentation). Our load cells are capable of withstanding vertical as well as horizontal loads, encountered on the stoppage and movements of trucks. Whereas, most of the other suppliers give compression type of load cells which cannot withstand horizontal load. Looking at the basic design of the compression / Column type load cells itself, a layman can also conclude that even the slight movement in the platform (which is unavoidable because of the acceleration & braking of the vehicles/ truck / trailors over the weighbridge platform) will cause drastic wear and tear to the load cell and hence result in faulty weights, unstable readings and variable weights at different corners of the weighbridge platform. Our load cells are having protection against LIGHTNING, RAIN WATER & DUST. Only Loadcells which are REPAIRABLE, incase any problem occurs in the later years. We shall also provide one free standby loadcell for the time of repairs so that your weighbridge is in working condition even for the time when the loadcell is send for the repairs.

Weighing Capacity: 1 Kg Platform Size: 300*300 mm Display Type: Digital Automation Grade: Automatic I Deal In: New Only Digital Weighing Load Cells Indicator

We offer a comprehensive range of flame proof indicators. These consists ammeters, switches, timers etc. They are made from high grade raw materials that are sourced from reliable vendors of the market. The range is made with latest trends of the market so that they will trouble free operations. Clients can avail these from us at market leading prices.

ESD’s Temperature Sensor range includes standard, flameproof as well as mineral insulated type Platinum Resistance Bulbs and Thermocouples along with bar-stock and fabricated Thermowells.These Sensors and Thermowells are available in various shapes, sizes and sheath material for different applications.