Industrial Seals Dealers in Thane

BGH: Semi-split mechanical seals are used if there is a sufficient axial clearance to pull off the seal housing and seal housings until the sliding parts are accessible. I. e. only the wearing parts proper, such as the seal face and stationary seal as well as O-rings are split. The seal face and stationary seal, springs and O-rings can thus be replaced without requiring complete disassembly. Springs are arranged to be protected from the medium. The split stationary seal can be used in either side.

  POWERTECH offer an array of hydraulic seals, which is high in terms of quality and durability. It is specially designed for high-pressure dynamic applications like hydraulic cylinders and is in conformation with international standards & norms. Our range of hydraulic seals is available in varied specifications and is stringently checked at every level on varied parameters before delivering the same at the clients' end.  

Oil Seals used for Shaft Sealing in vertical or horizontal sealing in compressor, Gear Box, Motor to protect Oil, Water or any Liquid.

We are engaged in manufacturing high-quality PTFE Seals. The offered PTFE Seals are designed under the guidance of our proficient professionals using superior quality polytetrafluoroethylene and ultra-modern technology used to eliminate the chances of leakage. Our provided seals are highly praised in the market due to their various quality attributes. Besides, clients can avail these deals from us at affordable.   Features: Easy to use Rugged construction Fine finish

Micro Seal is one of the leading Designers & Suppliers of world-class Mechanical Seals, Seal Support system for Pumps, Compressors,Afitators, Mixers and Reactors. We are implementing ISO 9001:2008 Quality Management Standard & manufacture mechanical seal according to international Quality and safety standards with same design and fitting.(EN 12756-DIN24960,API-682, and ISO 3069.) We have computer aided design facility for designing and developing mechanical seal to meet and fulfill customer requirements.

Rubber Piston is used to contain pressure on one side of a piston without leakage, therefore allowing maximum mechanical effort to be applied to moving the piston along the bore of a cylinder. Rubber Piston consists on MS Steel which has rubberized coating on it. It is used for high pressure pneumatic application.

We provide service of taking necessary physical dimension of equipment at customer’s site followed by installation and running trials services. Inventory levels of Mechanical seal and spares which are manufactured by us are maintained to meet the customer’s requirement.

We provide Hydraulic Back Up Seal to the customers at the leading industrial prices. The Hydraulic Back Up Seal that we deal in is acclaimed by the world wide customers for the useful attributes it possess. We are a preferable choice in the market for offering superior quality Hydraulic Back Up Seal. Attributes :High efficiencyExcellent strengthReliableError free performanceCorrosion resistant Used In :Track AdjusterBoomArmTensioner Cylinders Specifications TypeMaterialSize RangePressure Bar (Max.)SpeedTemp.(oC)SpiralPTFE-TeflonVarious8000.5-20 to +200Single plan GroovePTFE-TeflonVarious8000.5-20 to +200

Different sizes of Oil Seals are our famed speciality. They are used widely in many factories for their outstanding quality. We have rated them with highly competitive prices with special discounts for deals in large quantities. We focus mainly on bulk and medium sized orders. We also provide delivery services that are known to be prompt and punctual.

Labyrinth Seal is used with SN, SNA, SNH, SNL, SD and SAF type housings. For large Plummer block housings, like SDJ, SDG SBD, THD types, the Labyrinth Seal is the preferred choice. For SOFN housings the labyrinth seals are supplied with internal design having additional external oil traps and are called ‘Sealing Collar’ When operating conditions are severe or when the speed is high, Labyrinth seals are recommended. To prevent rotation of the seal on the shaft, on O-section cord of synthetic rubber is incorporated in a groove provided in the labyrinth ring bore. The maximum permissible misalignment of the shaft in approximately 0.30. The labyrinth seal can be used at temperature range of - 500 C to + 200.0 C, Labyrinth Seals are suitable for grease or oil lubrication and axial shaft displacement but not suitable for vertical mounting. For external condition with dust, sand, grit, sharp objects, clippings, splinters and sunshine Labyrinth seal is suitable but it is unsuitable with splashing fluids.

Available with us is the precision-made Wiper Seals. The Wiper Seals, we offer, are also known as Dirt Wipers, Scrappers or excluders and extensively used keep contaminants such as dirt, dust & moisture from entering the fluid power systems. The clients can avail the Wiper Seals from us at the most affordable price. Design Criteria Premature failure of seals or any component in fluid power system is due to contamination. Poor selection of wiper seal can result into failure of Rod seals. Design criteria for the wiper seal should not be limited to allow the proper fitment of rod seal (dynamic sealing ) but also sealing of housing ( static function ) has to be taken care of. Below mentioned are the various profiles of the wiper seal designed to suit the basic requirement of containing the contaminant. Design & selection criteria of the wiper seal is largely depend upon the surface speed of rod, fluid media, rod surface finish & speed. Single lip design or straight wiper lip design offers best scrapping & dirt removal performance. It is recommended for most sealing applications with high contamination. Single lip beveled wiper lip is less aggressive as it allows microscopically thin oil film to be retracted back into the system while providing adequate dirt exclusion in less contaminated environments. Wiper seal with double lip i.e internal as well as external lip provides best sealing performance. It eliminates built up fluid pressure between wiper & rod seal. For applications where equipment is exposed to highly contaminated with dirt, mud, moisture or where the position of the rod seals are such that it is possible for moisture or other contaminants to get past the wiper, leading to the corrosion or damage of components & seals. For these applications, we are offering special environment seals.

With the help of our highly experienced professionals, we manufacture and supply Oil Seals using superior grade raw material and deploying advanced engineering techniques. These products find usage in various industries and highly effective in performance. We offer these Oil Seals in various sizes and specifications and also customize them as per the need of customers. We also undertake bulk orders and deliver them within a specified time frame to meet the need of market.

We are offering aluminum seals. manufactured from quality aluminum, our aluminum seals are known for their excellent finish, polish, and price. Our aluminum seal contains nickel acid that facilitates easy sealing. .

We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distributi Being one of the prominent names in the industry, we, as a Supplier, bring forth a wide array of Pump Seal - 20r & 20m to our customers.