Limit Controller Dealers in M. G. Road, Thane (9 products available)

• Certification: ISI Certified
• Voltage: 24-48 VDC
• Accuracy: +/-5 MV @25 Deg. Cel.
• Current: 10 A
• wide range: 0-1000 MV
• Pole Type: Double Pole, Single Pole
• Single Type: Double Throw, Single Throw
• Setpoint: 1000-1000 MV

Humidity control system is normally required to control the humidity air conditioning system in pharmaceutical production area to avoid moisture ingression in product. This helps to improve or maintain product quality. It is must in FDA approved pharmaceutical companies. We design and supply humidity control system for air conditioning for hospitals, as well as for pharmaceutical companies, etc. Provide designed and detailed engineering as per customer requirement for Humidity Control system, for Air Conditioning, Capacity Enhancement in for Humidity Control system, for Air Conditioning, Humidity Control system, Revamping for energy efficiency as well as for product quality improvement, Providing preventive as well as break down maintenance services for Humidity Control system.

We have been in the manufacturing of different types of Conductivity Indicator and gained a lot in very short span of time. with our prime objective of customer satisfaction with superior quality product we always deliver items on time and at most competitive prices.advantage : digital indication of conductivity is possible online.service : for all types of liquidsworking principle : conductivityaccuracy : 1% fsdmounting : inlineindicator mounting : onlineconductivity indication : digital through head mounted indicatorrange of conductivity measurement : 0 to 4, 0 to 40, 0 to 100, 0 to 2000 µscm sensor moc : ss 316sensor rod moc : ppmoc of inline fitting : absprocess connection : hose connectionindicator housing : weather proof ip 65 power supply : 230 v acmax. Fluid temp. : up to 60 degree c max. Fluid pressure : 4 kgcm2 application : for accurate indication of conductivity of fluid passing through the pipeline.

• Input: ONE UNIVERSAL Input Thermocouples : J,K,T,R,S RTD's : PT-100, PT-1000 DC mA : 0 – 20 mA, 4 – 20 mA (Maximum 12 Volts) DC mV : ± 50 mV, ± 100 mV, ± 200 mV, ± 250 mV DC Volts : ± 1V, ± 3.3V, ± 5V, ± 10V
• Range: Refer 'table A''
• Ambient: Compensation automatic, ambient 0-60°C
• Resolution: 1 or 0.1 or .01 or .001 programmable
• Display: Super bright in 4 + 4 format , with NO BLINK programming technique Upper 4 digits 0.5" red colour Lower 4 digits 0.39" green colour
• Ananciation L.E.D's: 7 L.E.D.'s , 3 mm , multi colour, 3 for O/P's, 1 each for A/M, Alarm, Profile, Soak Time
• Parameter Setting: By soft touch, Elegant, Sturdy membrane keys & User friendly menu driven software
• Outputs: THREE, Programmable outputs with modular attachments Relay module SSR module 4-20 mA module Retransmission module
• Note: Output modules are predefined All three outputs can be assigned as relay or SSR or 4-20 mA, this means at a time either 3 relays or 3 SSR's or 3 4-20 mAs outputs also available
• INPUT Control Outputs Rating: Relay SPST 230V / 3 Amp, 12 volts DC pulses for , 4-20 mA (Load 450 ohms)
• CONTROLS:  
• Control Action: PID / On-OFF / TP PID P = Propotional Band = 1.0 to 999.9 units adjustable I = Integral = 0 to 3600 ( 0-1200) seconds adjustable D = Derivative = 0 to 500 seconds adjustable CT = Cycle Time = 0.5 to100 seconds adjustable On-OFF Hys
• Control Action Assign: PID for O/P 1 and O/P 2 ON-OFF for O/P 1, O/P 2 , O/P 3 T/P for O/P 1, O/P 2 , O/P 3
• Control Modes: Heat / Cool / Heat-Cool
• Overshoot Control: Provided
• Soak Timer: Assigned for O/P 2 or O/P 3, Soak Timer programmable (HH-MM or MM-SEC) Set Point Start up or Power on start up
• Manual Output: Provided, 0 to 100%
• ALARMS: Assigned for O/P2 and O/P3 Alarm Types : Low / High /Band /Deviation / End of Profile Alarm Acknowledge : Latchable / Unlatchable Alarm Inhibit : Available
• Retransmission: 4-20 mA or 20-4 mA or 0-20 mA or 20-0 mA programmable, Non-isolated, Retransmission assign for O/P 2 and O/P 3 Provided on request
• Communication: RS485, 2-Wire, Half duplex RS485 MODBUS on request, MODBUS RTU or ASCII Baud Rate Programmable 1200/2400/4800/9600, contact factory for higher Baud Rates
• PROFILER: 2 Profile Programmes / 8 Segments Each Each segment programmable for either RAMP or SOAK Profiler can be configured as : - RAMP/SOAK - RAMP/RAMP - SOAK/SOAK - SOAK/COOL Soak Time programmable in HH-MM , MM-SEC Overshoot control during

• Brand Name: Niksu
• Voltage: 440 V AC
• Country of Origin: Made in India
• Phase: Three Phase
• Usage/Application: Industrial
• Current: 2 A
• Material: Mild Steel
• Flash Memory: 64 Kb

Pulse-train Motion Controller DVP-PM, High Torque Stepper Motors

Speed Controllers for Eddy Current Motors, Torque Analyzers

Vaccum Controller, Industrial Rotary Evaporator, Photochemical Reactors

pid controllers, Flow Nozzle, Industrial Stirrer, Furnace, Centrifuge