Limit Controller Dealers in Vadodara

We are one of the leading Electronics PID Controller Suppliers in India. Our Digital PID Controller is A PID controller calculates an "error" value as the difference between a measured process variable and a desired set point. The Industrial PID Controller attempts to minimize the error by adjusting the process control inputs. The PID parameters used in the calculation must be tuned according to the nature of the system. The response of the controller can be described in terms of the responsiveness of the controller to an error, the degree to which the controller overshoots the set point and the degree of system oscillation. Features : InputThermocouple : J, K, T, R, S, C, N, E, L, U, W, B,Platinel IIRTD (2 wire 3 wire): Pt100Linear mV : -5 to 56 mVCurrent : 0 4 to 20 mAVoltage : 0 to 415 acdcMax 3 outputsOutput 2 programmable as Heat Cool AlarmOutput 3 programmable as an alarmSelectable lower display optionSelectable temperature unit - °C °FAuto Manual mode4 -Zone PIDHeat - Cool PID algorithmRamp - SoakSoft Start (set point ramping for process startup)85 to 270 VACDC supply voltage (24 VACDC optional )Program security

The Intensity Controller allows for the control of laser power diverted into the microscope. The beam from the laser goes through a rotating half-wave plate and a Glan-laser calcite polarizer. The intensity of the output beam is regulated by rotating the half-wave plate.The rejected portion of the beam is absorbed by a beam dumper. The unit is connected through the USB port.

To protect our entire range of products from external factors that can be damaging, we have a state-of-the-art packaging unit equipped with the latest secure packaging technologies and materials. Our organization is renowned as reliable distributor in the industry and based in the well-connected state of Gujarat(India).

uPID – 296 : Two Line PID temperature Controller uPID – 196 : One Line PID temperature Controller Features & specifications Universal selectable Input :- RTD-PT 100 , Thermocouple K Type (Chromel – Alumel), Thermocouple J Type (Iron-Constantan), Thermocouple R Type (Pt-PtRh 13%), Thermocouple S Type (Pt-PtRh 10%), Analog – 4 to 20mA DC Range : RTD-PT 100 (0.1 *C) – -99.9 to 400.0 *C, RTD-PT 100 (1 *C) – -99 to 400 *C, Thermocouple K Type – 0000 to 1200 *C, Thermocouple J Type – 0000 to 750 *C, Thermocouple R Type – 0000 to 1750 *C, Thermocouple S Type – 0000 to 1750 *C, Analog – -999 to 9999 Resolution: RTD-PT 100 – 1 *C or 0.1 *C, Thermocouple K Type – 1 *C, Thermocouple J Type – 1 *C, Thermocouple R Type – 1 *C, Thermocouple S Type – 1 *C, Analog – Selectable Accuracy: Better than +/- 0.5% of Full Scale Compensation: Automatic Cold Junction Compensation One point calibration for RTD-PT100, One point calibration for all Thermocouples, Two point calibration for 4 to 20mA DC Input sensor selection through front keyboard Control Type : On-Off, PID Control Logic : Heating or Cooling PID Parameter : Auto Tuning or Manual Tuning, Proportional Band, Integral Time, Derivative Time Relay Output : 2 nos. of Relay Output (OPTIONAL), PID action for first Relay only Analog Output : Retransmission or Control 4 to 20mA Output Selectable Four Keys on the front panel for setting of Relay – Set Point, Control Logic, Hysterisis in Temperature, Delay in Time, PID Tuning – Auto or Manual, PID Parameter – Proportional Band, Integral Time, Derivative Time, Input Sensor Selection Size 96 mm X 96 mm X 65 mm

Application Controlling temperature, humidity, pressure, flow, pH. Detecting voltage, ampere, power, phase failure Features PID auto tuning Two FUZZY PID control processes, with two individual outputs. Multi range input( TC, RTD, mV ), each 14 BIT resolution. Relay output, SSR drive, 4~20mA changable by a module. Three-point alarm, with 19 alarm modes. Non - volatile memory. Self - diagnosis function. AUTO ZERO and AUTO SPAN circuit keep good accuracy. Free range voltage from AC 85V to 265V or DC 10 to 50V. Data lock function 2 pattern each 8 segments programming procedure available to be ordered. Input 2 can be used in Remote SV. Optional transmitter output. With output percentage control, if sensor broken, the controller automatically board manually operation to be controlled by heating power with output percentage.

cortex a9 800mhz 32-bit risc cpu. 4m for program storage, 8m for data storage. 24 channel digital input, 24 channel transistor digital output. 2 can bus master station, support synchronous positioning, electronic cam, interpolation function, built-in terminal resistance. model: ak800m.

Advanced embedded micro controller based design Available in panel type, field type, and Flame proof and IP version Automatic Or Manuals Temperature Compensation Multi parameter display by a key press.

We are acclaimed in the industry for offering a superior quality PID Temperature Controllers, which are admired for their accurate measurements. These devices are precision-fabricated for measuring, displaying and controlling temperature of furnaces. Keeping in mind the budgetary constraints of our clients, we offer these at affordable market prices.

If one needs a smooth change of parameter quickly and without any oscillation, then PID Temperature Controller is a good option. A PID temperature controller can get desired value of the temperature quickly, and hold the position with great accuracy. An on/off controller will switch the output, only when temperature crosses the set point. For heating control, the output is on when temperature is below the set point, and off above the set point. We provide controllers varying in sizes and functions at reasonable price.   Essential Points Low cost, Effective, Easy to use PID Temperature Controller.      8-Digit Dual Row (4-Digit for PV & 4-Digit for SV).      Selectable sensor input (T/C : K,J,E,S,T,B,R ;RTD & Linear I/P) from keyboard.      Programmable Lower & Upper set point limits.      Programmable control action ON-OFF/PID control.     Four different alarm modes (Low/High/Deviation low/Deviation High).    Program lock function (to prevent unauthorized tampering).     Universal supply voltage ranges from 90 to 270 VAC.      Available in 4 Standard DIN sizes (48x48, 72x72, 96x48, 96x96).

Torque Drive Controller, Alarm Control Panel, Bubble Sensor Controlle

PH Controllers, Muffle Furnace, Economical Scale, Rotary Shake

TORQUE MOTOR CONTROLLER, Panel Top Indicator, Solid State Relay

Motion Controller, Door Side Sensors, Pressure Sensors, Fiber Optic Sensor

TORQUE MOTOR CONTROLLER, DC Drives, Power Suppl

Torque Motor Controllers, DC Drives, Timers, Vibrator Feeder Controller

Controllers, Utility Pressure Switch, Differential Pressure Switc