Industrial Silencers Dealers in Tiruchirappalli

  The discharge silencer is used to reduce the discharge noise of the compressor / blower when discharging fluid into process. It is constructed in circular shape. The fluid passes through the annular acoustic packing where the sound energy is absorbed. The straight flow path through annular acoustic cylinder ensures minimum pressure drop. The following data are required to design discharge silencer. Flow rate Temperature Inlet size Allowable pressure drop Silenced noise level requirements  

ACVS Duct Silencers are used to attenuate mechanical equipment noise propagated through the ACVS duct work system. Acoustics India offers duct silencers which are normally rectangular in construction, designed to reduce the noise to the recommended level with minimum pressure drop. These silencers are offered in standard dimensions, which can be readily mounted on the existing duct. Higher performance can be achieved by combination of more than one silencer in series depending on the noise level requirement inside the building. The predicted performance and the pressure drop across wide range of flow rates are available on request. Acoustics India offers the following standard rectangular duct silencer models at various sizes

Anpam Engineering specializes in designing and manufacturing Steam Vent Silencers for effective noise reduction in steam and gas venting systems. Our silencers are engineered to handle high pressure and temperature, ensuring safe and quiet discharge. Built with durable materials and precision design, they provide efficient noise control, long service life, and reliable performance for power plants, refineries, and process industries.

Industrial Fan Silencers are installed depending on fan size, horse power, air flow, type and number of blades, static pressure, rotational speed etc. We are named among the renowned Manufacturers, Exporters and Suppliers of Industrial Fan Silencers. The manufacturing of these silencers is done using the latest techniques under the strict vigilance of experts. One can place retail as well as bulk orders for Industrial Fan Silencers with us. Details :Fan silencers usually require absorptive type design as they are well known for better attenuation in mid and high frequency range (500-8000 Hz). The effectiveness of absorption material progressively reduces at frequencies above and below this range. The noise control is achieved by means of absorption. The acoustic energy propagating through the silencer is effectively absorbed into the fibrous absorption material and converted into heat energy. These silencers generally employ straight thru design and have a low pressure drop as it imposes very little restriction to the flow. The fan silencers are normally selected on the basis of maximum allowable pressure drop at rated flow and the silencing criteria. These silencers are usually sized for around 5000 to 5500 FPM velocity but not exceeding 7500 FPM velocity to prevent excessive self-generated noise and aerodynamic noise generation. While selecting the fan silencer, it must be ensured that the flow area throughout the silencer is sufficient to accommodate the air flow without imposing excessive restriction. Data Required Air Flow Rate (Actual CMH) Temperature (°F) Pressure (PSIG) Maximum allowable pressure drop (inches of water) Existing noise frequency spectrum (63).

Vent Silencers, Air Vent Silencer, Steam Vent Silence

Industrial Silencer, Spring Anti Vibration Mount, Exhaust Silence

Vent Silencer, Industrial Enclosur

Industrial Silencers, Acoustic Enclosures, Acoustic Treatmen

Start up Vent Silencer, Fan- Blower Silencer, Crude Moringa Seed Oi

The aerodynamic noise is produced when venting of high pressurized gas to the atmosphere. The gas vent silencer is mounted on the discharge of the valve. The fluid enters through the silencer inlet (reactive section) where the pressure is reduced as per the requirements and process condition. Then it passes through the annular space between the acoustic packing where the sound energy is absorbed. These are used to attenuate the high as well as low frequency noise to the desired noise level.

Discharge Silencer for Blower, FD Fan Silencer, Steam Vent Silence

Vent silencers are used to attenuate noise produced by the expansion of Gas, Steam or Air at elevated pressure to atmospheric pressure. The fluid passes through a inlet diffuser and reduces the noise generated and modify the sound spectrum, so that it can be better controlled in the reactive stages of the silencer. This is obtained by dividing the flow into many small jets.

Start up Vent Silencer, Fan & Blower Silencer, Stack & Bypass Stack Silence

Industrial Steam Blow Silencer, Motar Silencer, Stainless Steel Enclosur

Suction and Discharge Silencer, Blower Fan Silencer