Process Indicator Dealers

Universal Input Process Indicators PC Communication – RS232 / RS485 MODBUS RTU Protocol(Optional) Available in 3 / 4 / 5 digits 3” / 0.5”/ 1”/ 2”/ 4” 7 – segment RED display Accuracy better than ± 0.25% FSD 24V DC Transmitter Power Supply Retransmission output (Optional) 2 / 4 programmable Alarm contacts Fully configurable through front keypad

CPI 300D instruments are Dual Channel Differential Reading instruments. CPI 300D measure and display process parameters like level, Pressure, Temperature, Flow, Vibration, Humidity, Wind Speed and more. These instruments accept a voltage or current input and convert them to the programmed process variable Settings are saved in non-volatile memory and no battery backup is required. The user can program two independent display modes. Typical applications include Level and Volume display in the same instrument These instruments also have the capability to switch on relay(s) based on user settings. These outputs can be used for process set points and alarms, and for controlling pumps. These instruments are panel mount Optional features includes: RS485 MODBUS network protocol, Upto 2 relays can be programmed using 4 setpoints and current output of 4-20mA.

Universal Input Strain gauge input Custom linearisation Differential Measurement Four alarm setpoints Multiple alarms on a single output Digital communications Analogue retransmission Transducer supply Transmitter supply

Libratherm offers simple Digital Process Indicator Controller, which are low cost, accurate, rugged and reliable instruments available for indication and single and dual set point OnOff control for general-purpose process control applications. Indicators are available in display sizes of 0.5” to 4” for panel mounting and shop floor installations. Models featured here can be used to monitor and control the various industrial process parameters such as ACDC voltage and current, Pressure, Load, pH, ORP, Conductivity, RPM, Flow, Level, Humidity etc. Single and Two set points with relay outputs are provided for control or alarms. All instruments accepting 4-20mA are also provided with built in 12 to 24VDC loop supply.

Electronet's Series DPC-012 are Process Indicator / Controllers specially designed for various industrial applications. These can be used for monitoring and controlling parameters like Temperature, Pressure, Flow, Speed, Level etc. with the help of proper Sensors / Transmitters. The control points are settable through the potentiometers on front fascia and control output is available at the rare end.

Pantech Instrument’s Difference Indicator, Model 804, are designed to display not only indication of two process inputs, but each input on demand too. They provide two alarms on difference of the inputs and provide an analogue output of 4-20 mA DC. The equation of Analogue output = K1+K2(A-B) where K1 & K2 are constants and AB are inputs. The instrument can be powered by either 110 V AC or 230 V AC or 24 V DC. The instrument is available in standard ¼ DIN housing of 96*96 mm suitable for panel mounting. Low drift precision components are used for long term accuracy of the instruments. All instruments undergo a burn-in for better reliability.

Being a customer-driven firm, we have introduced Universal Process Indicator for our customers. Offered with led display, these process indicators are designed in a way so that our customers must have enriched experience on the account of using these products. Easy to install and energy-efficient, these indicators are asked prominently in the market. Features    Convenient installation    Compact in size    Constant performance       Input type: CU50, PT100, K, E, J, T, S, R, 10 V, 4-20mA Measurement deviation: ±0.5FS Two Alarm Relay output contact capacity: 7A(resistance load) Modbus output: RS485 Transmitter Power: 24 VDC Power Supply: AC90V˜242V˜50Hz Work Environment: Temperature 0˜50.0℃ , relative humidity≤85%RH External dimension (mm): 96×48×75 Installation hole 92×44 Display: RED LED 4×0.8"

We provide process indicators and process indicating controllers as per the clients demand & the process needs. Input can be 4 to 20 ma, 0 to 10 v or, pulses, resistance etc. Output can be potential free contacts (single two or, four nos.) or, re-transmitter etc. Display will be led 7 segment or, lcd power supply can be 230 v ac, 110 v ac, 24 v dc or, 12 v dc mounting types can be panel mounted, wall mounted or, field mounted enclosure types can be ip 40, ip 54, ip 65 or, flameproo

We are offering Single Channel Universal Process Indicator. Ztech’s Digital Universal process indicator model ZT501 is designed to indicate process parameters like temperature, level, flow, pressure etc as per the process requirement for various applications. It can display the process value with the resolution of maximum 4 or 5 (optional) digits. The range is selectable from -1999 to 9999 scale with selectable decimal resolution. It can generate max four relay output (onoff) for various application with hilo selection. The hysterisis is programmable through out the range. It can generate analog output as retransmission & give computer connectivity port on Modbus protocol or GSM connectivity as an optional feature. They are very reliable, accurate employing the latest technology. They undergo stringent tests to assure quality performance. Features: Input : Universal Input (J K R S T Pt.100, mA,mV, V, Cu53, Special on demand) Display : 4 digit 12.5mm size super bright redgreen LED (5 digit 12.5mm size optionally) Output : max 4 relay contacts of 5Amp230Vac contact rating Transmitter Power : 24V30mAdc Analog Output : 4- 20mAdc opto & Galvanic isolated retransmission. Output Loading : Max 800 Ohms loading capacity Com port : RS232 RS485 Modbus RTU or GSM connctivity Accuracy : +-0.1% for linear & +-0.25% of span for non linear input Power : 110V 230V selectable or 90 to 260 VAC-DC & 24Vdc Ambient Temp: -10 to 55 degc. Humidity :