Automatic Filter Press Dealers

FILTER PRESS INDIA made full automation possible by incorporating corner feed plates into its filter press design. Eliminating center-feed eyes and stay bosses removed restrictions to membrane movement and consistently produces more uniformly squeezed cake. A more uniform cake, in combination with newly developed filter fabrics, allows easy discharge of the cake from the plate. Simple cake removal, never before available with conventional fixed-volume, recessed-chamber plate filter presses, allows FILTER PRESS INDIA to automate your filter press. An automated filter press includes a programmable logic controller (PLC) and may be supplemented with a local control panel, CRT, or touch-screen panel.

Automatic Membrane Filter Press With Multi Stage Plate Shifting used is water pressure, which is generated by pumping into the squeeze cavity to inflate the face of the plate against the filter cake. Membrane Plates are used to reduce the cake moisture content & shorten the filtration cycle time.

The operation of conventional filter presses have always been messy and labor intensive. With ever increasing labor cost there arose a demand for atomizing several filter press operations. N.M. Patel Engg. was first to develop & offer automatic filter presses with following features.    Auto Shaking mechanism The filter press with precisely engineered auto shaking mechanism will shake the group of plates at one time maintaining the predetermined gap between the two plates via chain or rope. The auto shaking mechanism is run by electric or hydro-motor shaking the plates with suitable revolutions adjusted by means of PLC, which co-relates the filtration sequence without operator’s attention. AUTO PLATE SHIFTER FILTER PRESSThis highly advanced arrangement, provides fully automated closing and opening. When the filter is ready for cake dumping, the double acting cylinder retracts, pulling with it the movable head or follower. As soon as the followers is fully retracted, the shuttle shifter takes over, picking up the first plate from the head end of the unit, moving it across the opening or cleaning space to expose the cake and stacking it against the follower. The shifter then automatically reverses, returns for the next plate, transports and stacks it against the first plate and so on with time cycle set in PLC. Until all of the plates have been successively shifted and chambers dumped. An over-ride is provided so that the shifter can be stopped at any time and its motion resumed when the operator desired. Drip Trays in Bombay Door ConstructionDrip Trays are kept below the plates or Plate & Frame. It serves the purpose of collecting Drip (Filtrate) during the filtration or water during washing which falls due to capillary action from the Filter cloth.Arranged underneath the filter plate set.Fabricated of steel with plastic coating, stainless steel or entirely of synthetic material. Operated manually or fully automatic by means  of electro gear drive or hydro motor. Accident Prevention  As safety precaution for the operating personnel. Safety Light Curtain to interrupt operation with pull-cord in order to re-start the closing and plate shifting device.

Avail from us precisely designed, high performance Semi Automatic Filter Press. We design and fabricate Semi Automatic Filter Press by using the latest techniques as per the industry set norms. The Semi Automatic Filter Press, offered by us, has manually controlled operation and requires least maintenance. Semi Automatic Filter Press can be availed at economical price from us. We are a well-known Semi Automatic Filter Press Manufacturer, Exporter and Supplier in Gujarat, India. Highlights Comes with single hydraulic CylinderMaximum number of plates is 100+ Hydraulic cylinder is automatically opened and closedInlet slurry is controlled with a Variable Frequency Drive

The highly efficient automated advanced filter press we manufacture is equipped with features that make the range excellent for granites, marble & ceramic industries, gypsum, crystalline salts, pigments, dry precipitates, sludge generated from galvanizing plants containing chromium, zinc, aluminum, copper, nickel or cadmium, and many other applications. Automatic filter press has the following components: plate shifting & plate shaker for auto cake discharge plc based electrical control panel pneumatically operated control valves flow sensor and hydraulically operated bomb door drip tray how it works: a push button initiates the filtration process. Slurry is pumped into all chambers and cakes are formed as filtration begins to flow the end of filtration phase is automated by flow meter which is located on filtrate discharge pipe the flow meter indicates the minimum flow rate of filtrate which is strictly related to the end of a cycle, the opening of filter press and the discharging phase a plate vibrating device during the discharge phase ensures 100 pct release of the cake a plc controls the phases and cycle times for all the filter press functions including operation of the ancillary equipment use of the most modern and advanced systems for operator protection and safety special features zero downtime saves 96 % of labour cost achieve final solid consistency at outlet upto 75% short cycle time: 8 to 30 minutes less capital expenditure : filter press & dryer can be planned smaller lower pollution control cost increased product yield improved process economy reduced space requirement fully automatic cycle manual mode option plc based controls upto 1500 x 1500mm plate size vibration system for cake drop drip tray system.

  special features: • zero downtime• saves 96 % of labour cost• achieve final solid consistency at outlet upto 75%• short cycle time : 8 to 30 minutes• lower pollution control cost• improved process economy• fully automatic cycle• manual mode option• upto 1500 x 1500mm plate size• vibration system for cake drop• drip tray system• light curtain materials of construction: structure: mild steeloperating pressure: upto 7 to 20 bar max. Operating temp. : 90'cmoc of filter element: pp application: excellent for etp-plants, insulators industries, granites, marble & ceramic industries, gypsum, bentoite, china clay dewatering, crystalline salts, pigments, dry precipitates, and many more

Upgrade to semi automatic filter press for smooth operation & reduce manual work. Durable, cost-effective & easy to use. Request a quote now!https://www.amarplastics.com/semi-automatic-type-filter-press.php Automatic inlet-outlet valvesBomb Door Drip Tray(In the Filter Press working principles there will be a little leakage from the plates because of cloth capillary. This may cause problems, by dripping into the cake collector below causing the discharged cake to become damp. Our automatic drip tray system not only collects the leakage of filtrate from the plates, but also protects the discharged cakes in the cake collector from any such leakage.) Individual Plate Transport SystemMechanical Plate ShiftingMulti Group Automatic Plate ShiftingWith Rubber Belt Conveyor & Hoper Assembly

We are a major Automatic Filter Press Manufacturer from India providing advanced technology for optimum filtration. Operation is initiated by a push button activated manually. The whole system of our Automatic Filter Press is controlled by computerized mechanism that leaves no room for error. The PLC mechanism controls cycle times, phases and the ancillary equipment as well. Use of modern filter fabrics ensures easy cake discharge, while the removal of restrictions produces uniform cakes

The function of the plate shifter is to move the plates and allow rapid discharge of the filter cakes accumulated in between the plates. It also contains a diaphragm compressor in the filter plates which aids in optimizing the operating condition by further drying the filter cakes. Automatic Filter Press An automatic filter press has the same concept as the manual filter and frame filter, except that the whole process is fully automated. It consists of larger plates with mechanical “plate shifters

We manufacture fully automated advanced filter press with plate shifting & plate shaker for autocake discharge along with plc based electrical control panel & pneumatically opereated control valves, flow sensor and hydraulically operated door drip tray. In this filter press initial filtration process takes place with the push of a button. Operator initiates filtration. Slurry is pumped into all chambers and cakes are formed as filtrate begins to flow. The end of filtration phase is automated by flow meter which is located on filtrate discharge pipe. The flow meter indicates the minimum flow rate of filtrate which is strictly related to the end of a cycle, the opening of filter press and the discharging phase a plate vibrating device during the discharge phase ensures 100 pct release of the cake. A plc controls the phases and cycle times for all the filter press functions including operation of the ancillary equipment

We manufacture Semi Automatic Filter Press with electro mechanical plate shifting device for individual Plate shifting with a Pick and Plate type Reciprocating shuttle. For shifting with total speed control, Hydraulic or electric motor is used. We offer the highly efficient Semi Automatic Filter Presses.