Epoxy Grout Dealers (198 products available)

increase the life & shine your home premium quality grout

We are offering epoxy tile grout. Take a look at the services we offer terrace & roof water proofing bathroom & toilet leakage wall crack & structural repairs

• Brand Name: HR Apoxy
• Floor Use: Floor Use,Interior Use
• Size: 40x40inch,45x45inch,50x50inch
• Style: Antique
• Feature: Epoxy Resistant,High Strength,Quality Tested,Waterproof
• Type: Epoxy Flooring
• Thickness: 0-3mm,3-5mm
• State: Gujrat
• Country of Origin: India

apoxy grout is three components epoxy based joint filler, it is easily applicable in the joint of vitrified tiles, glass mosaic tiles & other tiles. also it is suitable for the joint of granite, natural stone composite marbles & quartz stone. the excellent feature of epoxy grout is that it can easily be cleaned in any surface with water & scrubber scotch bright within stipulated time  + uk certified iso  + easy to use + consistent quality + highly water resistance  + peel proof + highly stain resistant + highly acid resistance   available in attractive colour range

• Size: 10 Kg

Expansive Grout Additive For good quality flowable, Nonshrink Cementitious grout Used for pressure Grouting with cement Slurry of Honeyconbed, porous concrete structures, duct & bed grouting of prestressed cable ducts.

• Joint width: 2 - 20 mm
• Density: 2200 TO 2300 Kg/m3
• Expansion: 0.1 to 0.5%
• Specific Gravity: 1.75
• Shore D Hardness: > 70
• Drying Time: +/- 45 minutes and varies depending upon atmospheric temperature.

Tielo Epoxy Grout is stainfree, colour-fast chemical resistant for use with ceramic & vitrified tiles, marble and stone. It is a 3 component epoxy tile grout consisting hardner, resin and fillor of various type of color. Tielo epoxy grout suitable for all type of ceramic tiles in green buildings. It can be applied on horizontal and vertical, Interior & exterior, dry, wet, and submerged conditions in residential and commercial areas, Tielo epoxy grout used with ceramic, porcelain, vertified, natural, glass mosaic, granite and stone tile, in different size of filling widths.

• Type: Adhesive
• Material: Epoxy
• Application: Construction
• Color: Available in Many Colors
• Feature: Eco-Friendly, Good Quality, Quick-Dry

• Aspect: Grey Powder
• Density: 2200 TO 2300 Kg/m3
• Expansion: 0.1 to 0.5%
• Compressive Strength at 27° C (Approx After 3 days): 30N/mm2 (Min)
• After 28 Days: 60N/mm2 (Min)

Grout HS — is a Ultra High Strength, Free Flowing Non-Shrink, and Chloride Free Grout Conforming to BS-1881, Part 116-1983. Uses :  Grout- HS is used for grouting of Bolt pockets and base plates grouting of foundation Bolt for all types of machinery in cement, textile, paper & steel industries, bridges bearing pads, columns in pre-cast construction.Advantage : Grout HS is an economical and easy to use material, requiring only addition of water. It is very easy to mix and Placement can be done with high flow characteristics, rapid strength development, adjustable consistency and compressive strength up to 7ON/mm2 (28 days) is achieved it does not segregate and bleed. It is impact and vibration resistant, non-corrosive to steel and iron, non-toxic and safe to handle.Application : All grouting areas must be free from the loose concrete, oil, grease, and dust where Grout HS will be placed. The grouting areas to be saturated with water and it are to been sured that no stagnant water is present before application. Add Grout HS Powder to clean water as per the recommended dosages. Keep on mixing with a grout or Concrete mixer till a smooth and even consistency is achieved. Mixed grout should be used within 15 minutes of preparation. After initial hardening of the grout, it should be kept damp either by wet Hessian Cloth or with pounding for a minimum of seven days. Water and Powder ratio varies from 0.12 to 0.13 depending on the consistency requirement of the site 25Kg of the material will yield approximately 12.0 Litre of Fluid Grout and 11 .0 Litre of plastic Grout mix respectively. Placing conditions including temperature may have to be assessed before pouring the grout at site. Small trials batches may be tried to ascertain best working consistency.Shelf Life : 6 months from the date of manufacture in unopened condition. To be stored in a cool and dry covered space should be protected from direct sunlight.Handlinkg Precaution : Grout HS is non-Toxic and Ingestion is to be avoided. If contact with eyes occurs, wash well immediately with water and seek medical advice.

• Color: As per Shade Card

Based in Ahmedabad, we bring to afore, the Epoxy Tile Grout that is acclaimed for unbeatable resistance to chemical & temperature and maximum physical strength. Demanded in many industries for stone and concrete crack filling, packing house tile etc., this Epoxy Tile Grout is doled out by us quality tested in the required specifications. With us, stay assured of the reasonable pricing and on-time global delivery.

• Size: 24-36cm, 36-48cm
• Type: Epoxy Grout
• Material: Epoxy
• Application: Cement
• Color: Brown
• Feature: Easily Washable
• Technics: Machine Made
• Country of Origin: India
• Brand Name: VITCON 7001 ANCHOR C

vitcon 7001 anchor c is a ready to use cementitious powder based anchoring capsule with a perforated skin. vitcon 7001 anchor c imparts controlled expansion characteristics stabilizing the grout system to achieve high early strength. vitcon 7001 anchor c is mostly used for fixing of steel rock bolts or wooden dowels to control rock strata during tunneling and mining.technical specifications: soaking time: < 6 minutes compressive strength in 24 hrs: > 11 mpa anchorage strength in 24 hrs: > 9 tones   applications:   drill the hole up to desired diameter and length as per specification. clean the hole thoroughly by blowing compressed air to make the hole totally free of rock dust and water before application. before application the capsule is submerged in water for a minimum of 3 minute to allow sufficient water to be absorbed through perforated skin ensuring the formation of non shrink thixotropic grout. water submerging is ensured when there is release of air bubble from the capsule. remove extra water from the surface of the capsule and insert calculated number of wet capsules till the depth of hole. the insertion is ensured with the help of a stemming rod or similar items.