Post Free Ad Sign Up

Material Testing Equipment Dealers

(698 products available)
  • Premium
    Surface Roughness Tester +2

    Surface Roughness Tester

    Get Price Quote
    • FeatureElectrical Porcelain, Four Times Stronger, Proper Working, Superior Finish
    • Frequency45Hz, 66Hz
    • Automatic GradeAutomatic
    • Power SourceElectric
    • Total Carbohydrate2years
    • Operating CurrentSingle Phase
    • Puncture Voltage220v
    ...more
    www

    Fine Instruments And Calibration

    Mundian Kalan, Ludhiana
    GST 8 yrs 4.6 (5)
  • Premium
    Defectovision Ir Inductive Heat Flux Thermography +3

    Defectovision Ir Inductive Heat Flux Thermography

    Get Price Quote
    • MOQ1 Unit
    • Test productsRound and square ferromagnetic steel billets
    • ManufacturerInstitut Dr. Foerster GmbH & Co. KG, Germany
    • Diameter / edge length50 - 300 mm
    • Max. test speed1.5 m/s
    • Testing methodInductive heat flux thermography
    • Untested ends5 mm
    • Innovative testing with FOERSTER The DEFECTOVISION IR system is an addition to FOERSTER's core competence, the non-destructive testing of semi-finished metal products. All around the world, more than 6.5 million tons of steel have been tested safely and efficiently by now with our latest technology. The automatic infrared technology applied by FOERSTER provides new approaches for previously impossible testing tasks. Inductive heat flux thermography facilitates the testing of entire surfaces of hot-rolled steel billets and tubes with round, square, or rectangular cross-sections as well as rails and profiles. Flat surfaces as well as exterior and interior radiuses are tested fully and reproducibly. All but a few millimetres of the ends of the materials are also covered by the surface test. Technical Data: Test products: Round and square ferromagnetic steel billets Diameter / edge length:         50 – 300 mm Test product length:   min. 4 m Max. test speed:         1.5 m/s Untested ends:           type 5 mm Minimum defect depth:         0.3 mm Minimum defect length:         10 mm   Your advantages at a glance: •          Fully automatic testing of round and profiled steel billets, tubes, and rails •          Adjustable defect thresholds for targeted depth selection •          Reduces repair costs by suppressing incorrect warnings •          Comprehensive electronic documentation of the test results •          Integration in existing production and quality systems •          Contactless and non-wearing technology •          Compact design for integration in existing production lines •          High throughput •          Test fully covers the entire material surface •          Detection of even the smallest material defects
    ...more
    www

    Electronic & Engineering co. (I) P. Ltd.

    Andheri West, Mumbai
    GST 9 yrs 4.6 (8)
  • Premium
    Le Chatelier Mould

    Le Chatelier Mould

    1,000 / Piece
    • MOQ5 Piece
    • Country of OriginIndia
    • Packaging TypeBox
    • SurfacePolished
    • Brand NameRupson
    • TypeLE Chatelier
    • Le-chatlier Mould it includes a small split cylinder forming a mould of 30mm internal dia and which is 30 mm high. Two parallel indicating arms with pointed ends are fixed on either side of the fixed cylinder. The mould is offered with two glass plates and lead weights. Moreover, a set of six moulds is supplied in the cardboard box. Our product is fabricated in compliance with IS: 5514 standard and can be delivered on time.   Set of 6 Moulds in a card Board box.
    ...more
    www

    Rupson Enterprises

    Sadar Bazar, Delhi
    18 yrs 4.5 (30)
  • Premium
    Pin And Disc Wear Apparatus

    Pin And Disc Wear Apparatus

    75,000 / piece
    • Country of OriginIndia
    • ConditionNew
    • Automatic GradeManual
    • Warranty1 Year
    • The Pin And Disc wear Apparatus consists of a steel disc whose top surface is case hardened and ground. The disc is rotated by a single ph. Induction motor at 3 different speeds. The test pin is inserted in a pin guide so that one end of pin touches the rotating disc. The pin guide is mounted on a cantilever to which spring balance is attached.The pin is inserted in the pin guide. The disc is set to rotate at the required speed. The required load is put over the pin and wear of the pin is measured for a time interval of 5 minutes. Different materials can be tested at different speeds, bearing pressures and either lubricated or non lubricated form.
    ...more
    www

    Tamilnadu Engineering Instruments

    Choolaimedu, Chennai
    GST 14 yrs 4.5 (30)
  • Premium
    Surface Roughness Tester +5

    Surface Roughness Tester

    118,300 / piece
    • InterfaceOptional USB / Data Export For Analysis (depending On Model)
    • Weight1.1 lb (500 g) including display unit, drive unit, and detector
    • Measurement Parameters38 surface roughness parameters
    • StorageUp to 10 measurement conditions; stores one complete measured profile
    • Measurement OrientationSupports vertical (against wall), horizontal (facing upward), and angled surfaces
    • Drive UnitHigh-precision drive unit for consistent stylus movement
    • DetectorSensitive and compact, suitable for small, hard-to-reach areas
    • Operating TemperatureTypically 0°C to 40°C (may vary by model)
    • DimensionsCompact, ergonomic design suitable for hand-held operation
    • The Surface Roughness Tester is a precision instrument designed for professional on-site and laboratory measurements of surface texture. With a lightweight, ergonomic design, it provides reliable measurements while being easy to handle in confined or challenging locations. The device evaluates 38 roughness parameters, including widely used ones like Ra, Rz, and Rt, in accordance with major international standards such as EN ISO, VDA, ANSI, and JIS. Its 2.4-inch color LCD with backlight ensures clear visualization of measurement results, profiles, and device settings. The built-in drive unit ensures smooth and precise movement of the stylus across the surface, while the sensitive detector allows measurements in different orientations, including vertical walls and upward-facing surfaces. Users can save up to 10 measurement conditions and one complete surface profile, making the device versatile for repeated inspections and detailed analysis. The tester is ideal for industries where surface quality is critical, including automotive, aerospace, metalworking, and manufacturing of precision components. Its portability, durability, and user-friendly interface make it suitable for both field and laboratory environments. Key Features Compact and lightweight design (500 g) for portable, on-site use 2.4-inch color graphic LCD with backlight for enhanced visibility Measures 38 roughness parameters: Ra, Rz, Rt, Rq, Rp, Rv, and more Fully compliant with EN ISO, VDA, ANSI, and JIS standards Stores up to 10 measurement conditions and one profile Supports vertical, horizontal, and angled surface measurements High-precision drive unit ensures accurate stylus movement Sensitive detector suitable for hard-to-reach areas Optional data export for further analysis Applications   Quality control in manufacturing and production lines Inspection of machined components, metal, and plastic surfaces Automotive and aerospace surface testing Tool, die, and mold surface evaluation Maintenance inspections in factories and workshops Research and development labs for material characterization
    ...more
    www

    Nunes Instruments

    Rathinapuri, Coimbatore
    GST 9 yrs 4.8 (8)
  • Premium
    Rubber Casing Cup Tester

    Rubber Casing Cup Tester

    100 - 101 / Piece
    • MOQ2 Piece
    • Country of OriginIndia
    • Number Of FlowerMoulded
    • ApplicationOil & Gas Exploration
    • Total Carbohydrate1 Year
    • cetificationISI Certified
    • MaterialMetal Impregnated Rubber
    • Our casing cup tester is designed to be attached to the drill string and then lowered into the casing beneath the wellhead to pressure test the blowout preventer stack and wellhead. When the cup tester is lowered into the casing beneath the wellhead, pressure is applied to either a test pump or by hoisting the type cup after filling the hook-up with water. The latter method is fast and accurate.  Astarn’s cup tester assemblies are rated to the API standard test pressure for casing sizes up to 10,000 psi. Special reinforcing can be offered on all cup sizes and casing weight ranges to hold up to 15,000 psi. Heavy Duty Packer cup is the least flexible but can also withstand higher pressure.   Astarn Engineering & Oilfield Supplies Pvt Ltd supplies most of the popular sizes of casing cup tester. In this category (SKU: CSS-401), the range of mandrel sizes from 2-3/8” to 3-1/2” and the corresponding casing range is 4-1/2” to 7-5/8”. While ordering, please mention mandrel size as well as casing size.  
    ...more
    www

    Astarn Engineering and Oilfield Supplies Pvt. Ltd.

    Kolkata
    GST 5 yrs 5.0 (1)
  • Premium
    25mm Riffle Sample Divider

    25mm Riffle Sample Divider

    Get Price Quote
    • MOQ1 Piece
    • MaterialStainless Steel
    • Country of OriginIndia
    • FinishingPolished
    • GradeSemi-Automatic
    • Frequency50/60 Hz
    • ColorMetallic
    • SizeStandard
    • ApplicationLaboratory
    ...more
    www

    Acme Scientific International

    Anand Parbat, Delhi
    GST 18 yrs 4.6 (30)
  • Premium
    Tensile Material Testing Machine

    Tensile Material Testing Machine

    Get Price Quote
    • CapacityIndustrial
    • Availability100-1000kg
    • Country of Origin220V, 380V
    • ColorAvailable In Many Colors
    • Power6-9kw
    • Warranty1year
    • We offer supreme quality Tensile Material Testing Machine characterized with precision screw and column construction and variable speed drive. The Tensile Material Testing Machine is suitable for studying mechanical behavior of various materials like metals, polymers, elastomers etc. The Tensile Material Testing Machine confirms to IS, BS & ASTM standards.
    ...more
    www

    Samarth Engineering

    Ichalkaranji, Kolhapur
    GST 16 yrs 4.7 (30)
  • Premium
    Riffle Divider

    Riffle Divider

    8,000 / Piece
    • MOQ10 Piece(s)
    • MaterialMild Steel
    • Automation GradeManual
    • Country of OriginIndia
    • Number Of Slots1 Slots
    • Number Of Chuts2 Chuts
    • Weight10-15 Kg
    ...more
    www

    Duvcon Instruments

    Ambala City
    GST 6 yrs 5.0 (1)
  • Premium
    Sigmascope SMP350 Material Testing Machine

    Sigmascope SMP350 Material Testing Machine

    Get Price Quote
    • MeasurementsPursuant to DIN EN 2004-1 and ASTM E 1004
    • Operating temperature0-40 degree C
    • Model NumberSMP350
    • Power SupplyVia Mains Electricity or Battery
    • Display TypeLCD
    • Our Electrical Conductivity Measurement instrument - sigmascope SMP350 is designed with utmost precision to measure the electrical conductivity of metallic conductor accurately and precisely. Our Electrical Conductivity Sigmascope SMP350 is also used for assessing hardness and strength of various heat treated materials. Electrical conductivity is a basic material property which gives information about metal's ability for conducting electrical current.Features Rapid and easy on-the-spot conductivity calculation of non-ferromagnetic metals as per DIN EN 2004-1 and ASTM E 1004 Windows CE operating system High-resolution touch screen with virtual keypad Conductivity probes Different measurement frequencies from 15 kHz up to 1 MHz Automatic temperature and automatic curvature compensation Certified traceable calibration standards (MS/m, IACS) Typical areas of application are Airplanes Complete measurement of electrical conductivity throughout the production process of aluminum copper, etc Mints Testing of electrical conductivity before anodizing aluminum Thermal sprayed coatings of non-ferromagnetic metals, e.g. Cu Technical data Measurements pursuant to DIN EN 2004-1 and ASTM E 1004 Measurement frequencies from 15 kHz to 1 MHz, as per the probe Measurement range from 0.5 to 65 MS/m or 1 - 112% IACS Measurement accuracy at ambient temperature: +0.5% of reading Smallest diameter measurement without visible influence on the reading: 13 mm Operating temperature: 0-40 oC Lift-off compensation to 500m Connector for electrical conductivity probe, without or with integrated temperature sensor Connector for optional temperature sensor TF100A USB communication Printer port Power supply via mains electricity or battery
    ...more
    www

    Fischer Measurement Technologies (India) Pvt. Ltd.

    Hinjewadi, Pune
    GST 17 yrs 4.7 (23)
  • Premium
    Fineness of Grind Gauge

    Fineness of Grind Gauge

    Get Price Quote
    • MaterialHardened Stainless Steel
    • Number Of FlowerPrecision Gauge
    • PackagingIndustrial Standard Packaging
    • UsageChecking And Controlling Dispersion Products In Various Industries
    • Models Available0 To 25 Micron,0 To 50 Micron,0 To 100 Micron
    • Fineness of Grind Gauge (Hegman Gauge) is a precision gauge manufactured from hardened stainless steel and has two ground channels giving scales of both microns and hegman.Grind Gauge is supplied complete with scraper blade. Hegman gauges are available in three models 0 to 25 micron, 0 to 50 micron, 0 to 100 micron. Grind Gauge Hegman Gauge Particle Size Gauge is used for the checking and controlling the production, storage, and application of dispersion products produced by milling in the paint, plastic, pigment, printing ink, paper, talcum ceramic, pharmaceutical, food, chmicals and many other industries.In operation the samples are placed into the top end of the hegman gauge and then drawn down using the scraper blade.
    ...more
    www

    Caltech Instruments Pvt. Ltd.

    Andheri East, Mumbai
    GST 23 yrs 4.5 (30)
  • Premium
    PAPER SURFACE OIL ABSORBENCY TESTER

    PAPER SURFACE OIL ABSORBENCY TESTER

    55,000 / Piece
    • MOQ1 Piece
    • Country of OriginMade in India
    • Brand NameGlobal Engineering Corporation
    • Inclined Plane500 X 100 Mm with a 4.5 Degree Gradient with Neoprene
    • Roller2.1 Kg, 76 Mm Diameter and 55 Mm Wide Lined
    • UsageIt is Used to Determine the Oil Absorption Resistance of the Surface of Paper and Paperboard
    • FinishCoated
    ...more
    www

    Global Engineering Corporation

    Vaishali Nagar, Jaipur
    GST 17 yrs 4.4 (21)
  • Premium
    Fatigue Testing Machine

    Fatigue Testing Machine

    80,000 - 180,000 / Piece
    • MOQ1 Piece
    • Country of Origin220V / 440V
    • Automation GradeAutomatic
    • Driven TypeElectric
    • Availability100-300kg
    • Total Carbohydrate1year
    • ApplicationMetal Testing
    • Power1-3kw
    • This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution. The bending moment is applied with the lever system and can be easily changed by moving a weight over the lever. Total number of revolution at which the specimen fails are recorded by a mechanical counter. An interlocking system puts off the motor at specimen failure. Machine meets requirement of IS 5075-1969.Features Table model, no need of foundation. Simple lever system for changing load. Calibration in Nm available on request. Light weight, Simple design, Compact Size.   NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
    ...more
    www

    S S S INSTRUMENTS

    Ichalkaranji, Kolhapur
    GST 14 yrs 4.4 (30)
  • Premium
    Mitutoyo Surftest Meter

    Mitutoyo Surftest Meter

    Get Price Quote
    • MOQ5 Piece
    • ApplicationIndustrial
    • Brand NameMitutoyo
    • Driven TypeBattery
    • Accuracy100%
    • FinishingPolished
    • ShapeRectangular
    • Warrenty1 Year
    ...more
    www

    Milhard Sales Pvt. Ltd.

    Miller Ganj, Ludhiana
    GST 3 yrs 5.0 (1)
  • Premium
    Rubber Tensile Tester +1

    Rubber Tensile Tester

    1 / Piece
    • MOQ1 Piece
    • Country of OriginIndia
    • Range500 Kg
    • Least Count0.1 kg
    • Elongations25 to 900mm
    • Traverse SpeedVariable speed 50 to 500mm/min
    • Motor1 Hp, 1425 rpm, Induction motor
    • Power Required220 VAC, 50Hz, 1000w, single phase
    • Unit ChangingN, Kn, Kg, G
    • Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as foam, rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.Tensile Testing Machine provides a relatively inexpensive way for determining the tensile strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of motor, gearbox and screw arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. The load directly indicated in kilograms or Newton.The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips. The frame of the tester fabricated from heavy mild steel sections to give the required rigidity and strength. Various built in safety arrangements such as over travel protection are provided.The tester is finished in metallic painting and bright chrome| zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied which electrical. Which include micro-, switches, Push buttons, and contactors for safe and convenient operation.
    ...more
    www

    The Bharat Group

    Parvatiya Colony, Faridabad
    GST 5 yrs 5.0 (1)
  • Premium
    Insize Surface Roughness Specimen Set

    Insize Surface Roughness Specimen Set

    19,644 / Set
    • MOQ1 Set
    • TypeSurface Roughness Specimen Set
    • Product CodeISR-CS2
    • Brand NameInsize
    • MaterialSteel
    • PackagingPlastic Case
    • UsageMeasuring Surface Roughness
    ...more
    www

    Vincent Techno Solution

    Amraiwadi, Ahmedabad
    GST 8 yrs 4.5 (4)
  • Premium
    Preform Perpendicularity Tester

    Preform Perpendicularity Tester

    Get Price Quote
    • Number Of FlowerAutomatic
    • Country of Origin220 V
    • Power1-5 KW
    • Frequency50 Hz
    • FeatureEasy to Use
    • Total Carbohydrate1 Year
    • After being a hard competitor to our contemporaries in Mumbai(India), our organization now has come forward to contest the providers in other marketplaces. We offer our clients a safe payment procedure as we have both Online and Offline Payment Processing suiting the needs of the clients.   Features : Suitable for different neck sizes Precision engineered resolution Up to 12.5mm straightness detection Self centering holder   Application: Preform Thickness Tester is used to check straightness of preform with respect to neck finish.Recommended for preform manufacturers and Blowing operations.   Operation: Preform is held vertically inverted in a neck holder and rotated. A dial indicator Point is set to zero on preform external wall when it is rotated.   Specifications: Straightness up to 12.5mm can be measured using this equipment. Resolution of 0.001mm with digital indication. Can be used for different neck sizes and height with change parts. RS 232 Connectivity.
    ...more
    www

    MULTI TECH ENGINEERS

    Vile Parle East, Mumbai
    GST 10 yrs 4.4 (8)
  • Premium
    PAPER SURFACE OIL ABSORBENCY TESTER

    PAPER SURFACE OIL ABSORBENCY TESTER

    80,000 / Piece
    • MOQ1 Piece
    • Brand NamePAP-TECH
    • ConditionNew
    • Power SourceElectric
    • ApplicationLABORATORY USE
    • FeatureEasy To Use
    • Total Carbohydrate1year
    • Roller2.1 kg
    • Diameter55 mm
    • Paraffin Oil50 CC
    • Density0.88
    • Viscosity1.28
    • Poise25 Deg C
    • Modal NoPAP-2073
    • StandardsTAPPI,SCAN,ISO
    • Description The Instrument is designed for the determination of the oil absorption resistance of the surface of paper and paperboard.Along with photo electric digital timer. As per TAPPI,SCAN,ISO
    ...more
    www

    Pap-Tech Engineers & Associates

    Sanganer, Jaipur
    GST 17 yrs 4.6 (21)
  • Premium
    Material Testing Equipment

    Material Testing Equipment

    Get Price Quote
    • Availability100-500kg
    • Country of Origin440V
    • Automatic GradeAutomatic, Manual
    • TypeMaterial Testing Machines
    • ConditionNew
    • We bring forth a diverse range of optimum quality Material Testing Equipment which is fabricated using high grade metals and by employing advanced technological methods. Utilized for the purpose of testing the various physical properties of different materials, our Construction Material Testing Equipment comprise of Spring Testing Machine, Pendulum Impact Tester, Izod Charpy Testing Machine, Tensile Testing Machine, Universal Testing Machine, Torsion Testing Machine for Rod or wire, Bursting Strength Tester, Hardness Tester, Flex Tester and Abrasion Tester. Aiding in quality assessment, product development as well as other research activities, our Universal Material Testing Equipment is used for testing Rubber, Plastic, Footwear, Leather, Paper and Petroleum products. We are engaged in manufacturing equipments both in standard as well as per customer’s special requirement. This has made us one of the prominent Manufacturers in our domain.
    ...more
    www

    Corporate Resource Group

    Burari, Delhi
    GST 18 yrs 4.5 (30)
  • Premium
    UV Curator

    UV Curator

    20,000 - 25,000 / Unit
    • MOQ1 Piece
    • Country of OriginIndia
    • CertificationCe Certified, ISO 9001:2015
    • Packaging TypeSliver
    • Country of Origin220V
    • ConditionNew
    • Automatic GradeAutomatic
    • Power SourceElectric
    • Warrenty1 Year
    • Brand NameDELTA SCIENTIFIC EQUIPMENT
    • ApplicationIndustrial
    • Size of hot zone4dia x 8 height
    • FinishPolished
    • TimerDigital
    • Owing to our adroit workforce and a well-equipped manufacturing unit, we are able to provide a quality range of UV Curator. Featuring an effective U.V. Coating, this UV Curator is widely used in various industries such as chemicals, electrical & electronics and mining. Our UV Curator is known for its noiseless operation, and features programmable raising hearth furnace and PID controller. This product is provided at reasonable prices to our customers. Features : Noiseless operation Sturdiness Accurate measurement Immaculate finish Model Delta UV : 254 nm UV source Digital timer Intensity controlled Rack adjustment facility Sample size 6 x 6 Programmable raising hearth furnace PID Controller Eurotherm controller based Temperature up to 1650 degree Celsius with accuracy of +/- 2 deg.
    ...more
    www

    Delta Scientific Equipment Pvt. Ltd.

    Kolkata
    GST 15 yrs 4.6 (30)
  • Premium
    SURFACE ROUGHNESS TESTER STAND +2

    SURFACE ROUGHNESS TESTER STAND

    50,000 / Piece
    • ApplicationIndustrial
    • Frequency50 Hz
    • Power SourceElectric
    • Voltage220-240 V
    • MaterialMild Steel
    • Pack TypeBox
    ...more
    www

    Sanjeev Precision Technologies

    Manali, Chennai
    GST 11 yrs 4.3 (29)
  • Premium
    Ndt Equipment

    Ndt Equipment

    Get Price Quote
    It consists of Ac 220B ± 10% 50HZ 5A power source, It has =6 m m fault detection speed,Rise of Temperature of probe 60, Detector Weight = 6.6 Kg, For long time operation the operating beat must be =3 s and off time=5 s.
    ...more
    www

    Aerica Engineering Private Limited

    Dahisar East, Mumbai
    GST 9 yrs 4.1 (7)
  • Premium
    Riffle Sample Divider

    Riffle Sample Divider

    Get Price Quote
    • MaterialG.I. Sheet
    • ApplicationDividing Aggregate Samples
    • Packaging TypePowder Coated
    • UsageAggregate Sample Splitter
    • Collection ContainerProvided
    • ScoopProvided
    • The company is a prominent Riffle Sample Divider Manufacturer and Supplier in India. Our Riffle Sample Divider is designed as per IS: 1607, 2720. The Riffle Sample Divider consists of metal boxes fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. Sizes Available Slot width 12.5mm, no. Of slots 16 Slot width 25mm, no. Of slots 16 Slot width 50mm, no. Of slots 8
    ...more
    www

    Biological Enterprises

    Malka Ganj, Delhi
    GST 18 yrs 4.4 (30)
  • Premium
    GSM Testing Machine

    GSM Testing Machine

    Get Price Quote
    • Availability10.2Kg
    • UsageIndustrial
    • Sample UsedUp to 500 GSM = 190grams
    • Diameter11.28 CM
    • Radius5.64cm
    • Least Count0.01gm
    • Owing to our industrial expertise accumulated over time, we have established ourselves as a leading Manufacturer, Exporter & Supplier in the industry. We offer GSM Testing Machine to our esteemed customers at attractive price. GSM Round Cutter boasts striking features such as light weight, strong built and durability. GSM Balance is used for determining GSM of knitted, woven and non-woven fabrics. It is also ideal for preparation of the sample for calculating the GSM (Gram per Square) of fabric.   Specifications Vgotech Gsm Round Cutter  With lock system for total safety. with 4Nos Imported Blades and 2Nos. Rubber Pads Vgotech Gsm Round CutterSpecimen Area : 100 Cm2 Specimen Diameter : 113 Mm (Approx) Type Of Cut : Standard [GSM = Specimen Weight in Grams x 100] Vgotech GSM Cut & Fit Cutter  Standard Model (Wheel Model ) Pad & Blades are not required. SAY No requirement  of GSM Pad  and  Blade Pay back period  3 – 6 Months Hold  Complete  Grip  on the  Fabric  with  minimal efforts 3 Nos. Imported Metal cutting Wheels perfectly synchronized to get  precise 100cm2  Cut  & Long Life. With a smooth  rotation the  GSM  sample will be cut. Can be  used  for Woven, Non Woven  or  Knitted  fabrics, Film, Carpet, Foam Paper and Board  Features : Area of Circle : Pie X Redius2 = 22/7  X 5.64 X 5.64 = 3.14  X 5.64 X 5.64 = 100cm2 GSM Balance (Electronic Weighing Balance) Model No. - EK01 Capacity - 600gm
    ...more
    www

    VGOTECH INDIA

    Saket, Delhi
    GST 10 yrs 4.4 (26)
  • Premium
    Axial Fatigue Testing Machine +3

    Axial Fatigue Testing Machine

    500,000 - 12,500,000 / Piece
    • MOQ1 Piece
    • MaterialStainless Steel
    • Driven TypeHydraulic
    • Automation GradeFully Automatic
    • Country of Origin440V
    • Total Carbohydrate3years
    • Country of OriginIndia
    • Jain Engineers offers an extensive range of axial fatigue testing systems upto 250kN capacity. Incorporating servohydraulic, servo-electric and linear motor technologies, these test instruments cover a broad range of fatigue, dynamic, and static testing applications. These applications include high-cycle fatigue, low-cycle fatigue, thermo-mechanical fatigue, fracture mechanics, crack propagation and growth studies, fracture toughness, bi-axial, axial-torsional, multi-axial, high strain rate, quasi-static, creep, stress-relaxation, and other types of dynamic and static tests. The tests can be performed as per ISO and ASTM standards.
    ...more
    www

    Jain Engineers

    Belagavi
    GST 6 yrs 5.0 (4)
  • Premium
    Fatigue Testing Machine

    Fatigue Testing Machine

    400,000 - 600,000 / Kilogram
    • Driven TypeElectric
    • Power SourceElectric
    • Capacity300 inch lbs
    • Speed2850 rpm
    • Maximum bending movement400 kg/cm
    • Phase3 Phase
    • Motor0.5 H.P
    ...more
    www

    Shri Engineering

    Kabir Nagar, Raipur
    GST 7 yrs 4.8 (6)
  • Rubber Hardness Tester

    Rubber Hardness Tester

    5,000 / No
    • Country of OriginIndia
    • Number Of FlowerShore Hardness Tester
    • Corrosion ResistanceYes
    • Display TypeAnalog

    Prestige Agencies

    Kalbadevi, Mumbai
    16 yrs
  • Drying Time Recorder

    Drying Time Recorder

    Get Price Quote
    Drying time could be essential for your products or processes. ‘CI’ series of Drying time recorders designed as per , offers a convenient, easy and accurate method of doing so. Consists of : Motorized carriage with 6 hemispherical stylus running on 6 glass strips of 25 x 305 mm or a single glass of 150 x 305mm to carry out 6 simultaneous tests at a time,Five user selectable speedtime 3, 6, 12, 24 & 48hrs. The drying time is calculated with the help of the distance moved, which can be determined from the scale provided on both the sides. The recorder automatically stops at the end of the test period and is provided with a secondary safety limit switch for additional protection of both the equipment and your test results.
    ...more

    Techno Instruments

    Malleswaram, Bangalore
    10 yrs
  • Substance Indicator

    Substance Indicator

    22,500 /

    TECHNICAL SPECIFICATIONS Dimensions in mm (LxWxH) 191 x 941 x 140 Weight In Kgs 3 Templates 10 x 10 cm & 10 x 20 cm Range 100 gms TEST SUITABLE FOR DIRECT GSM 10 X 10 cm & 10 X 20 cm CAPACITY 100 Gm (UNIT COUNT IN mg)
    ...more

    McSparr Test Systems & Industries

    Thakurpukur, Kolkata
    9 yrs
  • Spring Load Testing Machine

    Spring Load Testing Machine

    Get Price Quote
    Huge  springs of large wire diameter are the part of valve actuators spring cans.  Special Spring load testing machine was designed and developed for this kind of springs at OMTT. All the springs of this kind can be tested for load against deflection characterstics using this machine. Easy loading and un loading of springs is assured.
    ...more

    ORBIT MACHINE TOOLS & TECHNOLOGIES

    Hosapalaya, Bangalore
    8 yrs
More results
Filter by City

GENERAL LINK

Top Cities (India)

top